مقالات شانزدهمین سمینار بین المللی علوم و تکنولوژی پلیمر (ISPST ۲۰۲۴) در تاریخ 10 آبان 1403 در پایگاه سیویلیکا نمایه و منتشر شد.این رویداد توسط دانشگاه صنعتی سهند و انجمن علوم و مهندسی پلیمر ایران در شهر تبریز برگزار شده است.در این رویداد 659 مقاله شامل 1465 صفحه ارائه شده است.بر اساس تحلیل اولیه انجام شده، مقالات این دوره از کنفرانس عمدتا در موضوعات زیر ارائه شده است:
- - شیمی (عمومی)
- - علم و تکنولوژی پلیمر
لیست و عناوین مقالات نمایه شده از شانزدهمین سمینار بین المللی علوم و تکنولوژی پلیمر (ISPST ۲۰۲۴) به صورت زیر می باشد:
1. Synthesis and Anthocyanin Based Halochromic Effects of Polyurethanes
2. Halochromism and Mechanical Study of the Rhodamine-End-CappedPolyurethane
3. Recycling polymers by mechanical and chemical methods:Poly(Ethyleneterphetalate)
4. In-situ Compatiblization of Modified Recycled-PLA/ PBAT blends withImproved Mechanical and Rheological Properties
5. Improvement of Mechanical and Rheological Properties of Degraded PBAT
6. Enhancement of the modulus of lightweight shoe sole polyurethanenanocomposites by nano-silica
7. Synthesis and Characterization of Catalyst-free Maleic Anhydride GraftedPolypropylene Vitrimer
8. A Thermo-Responsive Colorimetric Sensor based on ChromoProbe−Polymeric Nanocomposite: A Strategic Tool for Visual UranylRecognition in Water
9. Investigation on the biodegradability of poly(vinyl alcohol)/poly (ethyleneglycol) foams produced by the batch foaming technique
10. Thermodynamic evaluation of PE/CO۲ system
11. Dependence of the Swelling Stress on the Difference in Solubility ParameterBetween NBR and Solvents
12. Impact of TMTD and CBS Accelerators on the Cure Rate Index in EPDMVulcanization Process and Mechanical Properties
13. Synthesis, structure and concentration of novel microgel with intramolecular crosslinkerschiff base (E)-۲-(((۴ -Hydroxyphenyl)imino)methyl)phenol
14. Biocompatible crosslinked copolymer of n-octadecyl acrylate and acrylicacid based on resorcin [۴] calixarene as an absorbent for heavy metal
15. Synthesis of Azobenzene-Diol Chain Extender-Based AcidochromicPolyurethane
16. The Effect of Incorporating Azobenzene-Diol Chain Extender on theHydrogen Bond Interactions of Polyurethane
17. Design, fabrication, and simulation of Tesla valve-based micromixers
18. Remove Oil Contamination of Seawater by Aerogels
19. Effect of alcohol and surfactant on support in MgCl۲-supportedZiegler–Natta catalysts
20. How PLA affects the rheology and morphology of PA۶/ ABS/ PLA ternaryblends.
21. Incorporating PLA to toughened PA۶/ SAN-g-PB blends without sacrificingthe mechanical and Impact Properties of Ternary blend
22. The Effects of Cooling Method on Final Mechanical and Thermal Propertiesof Polyethylene Tanks Manufactured by Rotational Molding
23. Electrochemical performance of carbon-Nickel electrode with PVDF binderfor supercapacitor applications
24. Polymer Coatings Corrosion Protection Advancement Leveraging a HybridOrganic-Inorganic Pigment: Experimental and Machine Learning Simulation
25. Modification the Processing and Rheological behavior of Polylactic acid ViaChemical Grafting of long chain branched PLA in a Reactive Mixing
26. PA۶/PA۱۲ Blend: Improvement of mechanical and viscoelastic properties byusing a chain-extender
27. Synthesis of Thermoplastic Polyurethane/Polycaprolactone Membranes andEffect of Different Pressure on it
28. Enhancing Thermoplastic Polyurethane Thermomechanical PropertiesThrough Molecular Weight Variation of Polycaprolactone Diol
29. Impact of HDPE/LLDPE Ratio on Drip Irrigation Tape Properties
30. Personal water purification system without the need for electrical energy
31. Characterization of polymer-particle interfacial morphology by gaspermeation test
32. Investigating and comparing the physical characteristics of LDPE/EPDMand LDPE/EVA compounds with the aim of improving impact resistance
33. Size characterization of biopolymer-based nanocomposite using dynamiclight scattering (DLS) technique
34. Synthesis of stimuli-responsive nanocomposite based on modified-chitosanand grapahene oxide
35. Multi-objective optimization of emulsion polymerized carbonblack/[styrene-co-butyle acrylate] polymer composites as printing inks basedon surface methodology
36. Thermal evaluation of In-situ synthesized poly Styrene-co-Butyl Acrylatenanoparticles loaded with Carbon Black Using thermogravimetric analysis
37. Optimizing the extraction method of collagen biopolymer for the fabricationof skin tissue engineering scaffold
38. Preparation of nano hybrid alloy using recycled polyethylene terephthalate(PET) and polycarbonate (PC)
39. Optimizing the catalyst effect in making hybrid nanoalloy using recycledpolyethylene terephthalate (PET) and polycarbonate (PC)
40. Effect of silica nanoparticles on the stability of paraffin Pickering emulsions
41. Fabrication and Performance Evaluation of Polycarbonate and ChitosanNanocomposite Membranes in Water Purification
42. Preparation of polyvinyl chloride / silver-graphene oxide nanohybridnanocomposite membranes for water treatment
43. A study on the gelation time and rheological behavior of injectable hydrogelsbased on carboxymethyl chitosan
44. Synthesis and characterization of PVA/Dextran Hydrogel for application indrug delivery
45. Synthesis of Rheologically Improved Dual Physical Cross-Linked NetworkGraphene Oxide/Poly(acrylamide-co-acrylic acid) Nanocomposite Hydrogels
46. Ball Milling Eggshells and Starch: Unveiling a Sustainable Material in theCircular Economy
47. Evaluation of the Mechanical Strength of Polyethylene Terephthalate Glycol(PETG) Filament and Comparison with PLA and ABS Filaments for Use in۳D Printing Technology: Review of Controlled Parameters for ۳D Printing
48. Novel Approach to Polydopamine Synthesis by Utilizing Nanomaterials
49. Effect of emulsifier type on the particle size of Lemon essential oilnanoemulsion
50. Preparation of antibacterial polyvinyl alcohol/chitosan lactate film loadedwith silver nanoparticles/eucalyptus extract
51. Sulfonated Polystyrene Reinforced with Surface Modified Nano Chitosan asPolyelectrolyte Membrane for DMFC Applications
52. Synthesis and Thermal Study of PCL and PEG-Based Two Soft SegmentsPolyurethane
53. Blending of Polyethylene Glycols with Different Molecular Weights:Physical Properties and Ibuprofen Delivery
54. The Effect of pH on the Degradation of Methacrylate Poly(glycerol sebacate)as a Photocurable Biopolymer
55. Synthesis and Evaluation of Polyamide/Polyethersulfone/Nano-GrapheneOxide Thin Film Composite Membranes
56. Novel acid-base proton exchange membrane based on chitosan for fuel cellapplication
57. Fabrication and characterization of fibrous scaffold Containing Poly(۳-hydroxybutyrate) and Wharton jelly matrix for tissue engineeringapplications
58. Forecasting the Percolation Threshold in Polymer-MXene Nanocomposites
59. Predicting of tensile strength for rod-like hydroxyapatite polymernanocomposites
60. Enhancment of ionic conductivity of polyethylene oxide(PEO) byincorporating polymethyl Methacrylate(PMMA) and modified graphenenanoparticles
61. The Effect of Nanoclay on Morphology
62. Effect of amine modification on the ultrafiltration performance of polyvinylchloride (PVC) membranes
63. Improvement of CO۲ separation performance of Pebax ۲۵۳۳ by the additionof graphene oxide modified with polyethylene glycol
64. Molecular Dynamics Investigation on Hydrophilicity of Graphene OxideNanoparticles Grafted with Polysaccharides
65. Molecular Dynamics Simulation on the Miscibility of Amine-modified PVCwith Epoxy and its Effect on the Glass Transition Temperature of theEpoxy/PVC/Amine System
66. Fouling Resistant PVC UF Membranes Containing Chitosan Nanoparticles
67. The Effect of Halloysite Nanotubes on Epoxy Network Evolution and theNetwork Mechanical Properties
68. The effect of melt mixing conditions on the thermal and morphologicalproperties of bitumen / polyethylene terephthalate / clay nanocomposites
69. Effect of Different Curing Agent Content on Mechanical Properties ofEPDM Elastomeric Foam
70. Effect of Carbon Black Content on Rheological and Structural Properties ofNBR/PVC Elastomeric Foam
71. PolyethyleneTerephthalate (PET) Hydrolase Process Optimization
72. Investigation of the Effect of Adding ABS on the Mechanical Properties ofEpoxy Resin
73. Investigating the structural changes caused by adding ABS polymer toEpoxy resin in different percentages using FT-IR spectroscopy
74. Carbon Nanoparticle-Cellulose Microfiber Porous Structure:Integrated Light-Absorber, Heat-Insulator and Water-Supplier of SolarSteam Generation System
75. In-situ synthesis of long tubular water-dispersible polyaniline with goldnanoparticles directed as a soft template
76. Binding of antibody to the surface of magnetic nanoparticles and itsinvestigation
77. Design and manufacture of composite using pyrolysis saffron petals withpolyaniline as a high efficiency supercapacitor
78. Statistical modeling of chemical recycling of PET
79. Na Alginate/PVP/HAp Composite Hydrogels as Nano-carriers for Bone infections
80. The Effect of Various Fillers on the Shrinkage of Polypropylene
81. mechanical properties of polyethyleneoxide nanofibrous electrolytes inlithium ion batteries
82. Thermal Stability of ABS/Clay Nanocomposit
83. Optimizing Sound Insulation Performance of PP/EPDM Blends ThroughTailored EPDM Content
84. Developing a Novel WaterbornePolyurethane Nanocomposite Coating withEnhanced Anticorrosion Properties Using a h-BN/GO/NiO Nanocomposite
85. Effects of common fire retardants on the stratification of an epoxy-acryliccoating
86. FRP or CRP? Investigating the Effect of Polymerization Method onElectrochemical Performance of DMAEMA-GO Nanocomposites
87. Investigating the effects of different external electron donors on Ziegler-Nata catalysts for polypropylene polymerization
88. Chitosan-based pH-sensitive antibacterial bionanocomposites with laponite immobilized silver nanoparticles for delivery of sunitinib maleate to breast cancers
89. Investigating the Structure and Thermal Properties of Amphiphilic BlockCopolymers of N,N-(Dimethylamino)ethyl Methacrylate and MethylMethacrylate
90. Investigating the effect of molecular structures of synthetic zwitterioniccopolymers on their thermal behavior
91. Preparation and Characterization of PPO Membranes Using ۱,۲-Dichloroethane Solvent: the Effect of Various Compositions on ContactAngle and Morphology
92. Enhancing Dielectric Properties of Polymer Nanocomposites via GraftingPolymer Chains onto rGO Surface
93. Investigating the effect of the permanent and temporary cross linkers on thestrain thickening properties of supramolecular polyborodimethylsiloxane gel
94. The effect of percent of micro silica on the rheological properties ofPBDMS/Silica micro composite gels and its compatibility with rheologicalmodels
95. Investigation on Fabrication of Continuous Carbon Fiber-ReinforcedThermosetting Furan Resin Composite Using ۳D-Printing
96. The Synthesis of Furan Resin from the Monomer Produced Using theMeerwein-Ponndorf-Verley (MPV) Reduction of Furfural
97. The effect of EPDM viscosity on curing and mechanical properties ofEPDM/SBR/organoclay nanocomposite
98. Preparation of Thin-Film Composite Membranes using Diblock TerpolymerNanospheres
99. The Sequence of Molecular Weight, Crystallinty and CompressiveMechanical Properties: A Case Study of Binary Polyethylene Glycol Blends
100. Prediction of Molecular Weight and Molecular Weight Distribution of Two-Component Polyethylene Glycol Mixtures
101. Investigation on mechanical properties of sustainable cellulose-basedcomposite of polypropylene
102. Utilizing recycled PMMA as a water-based binder in powder injectionmolding (PIM) technology
103. Recent progresses in polystyrene polymer conversion to value-addedmaterials such as nanostructured pyrolytic carbon coating by chemicalvapor deposition (CVD) pyrolysis method
104. Synthesis and Characterization of a novel trifunctional cycloaliphatic epoxyresin starting from THPA
105. Synthesis and characterization of chromium-based heterogeneous catalystscontaining tridentate ligands for the production of ۱-hexene
106. Thermo-Physical Properties and Thermal Energy Storage Performance ofPhase Change Materials Based on Paraffin Wax Composites
107. ۳D printined alginate dialdehyde-decellularized human amniotic membranehydrogels with double-crosslinking network for cartilage tissue engineering
108. Analysis of the effect of temperature and amount of hydrogen on the catalystof the ethylene polymerization process in the slurry phase
109. Preparation of super-strong and high tough poly(vinyl alcohol) basedhydrogels trough fully physical cross-linking by using agar ,tannic acid andsoaking in NaCl aquoes solution
110. Synthesis of high-stretchable and compressible conductive double-networkhydrogels based on gelatin and polyacrylamide
111. Synthesis of bioadhesive, self-healing injectable hydrogel with photothermaltherapy effect based on dynamic borate ester for biomedical applications
112. Poly(methyl methacrylate) Films Incorporating Leuco Dye as AcidIndicators: Applications and Innovations
113. Improving the Hemostatic Properties of an Injectable In-Situ Hydrogel byAmine-Functionalized POSS Salt
114. Stimuli-responsive polystyrene latex particles for high-security encryption
115. Kinetic investigation of copolymerization of ۲-hydroxyethyl methacrylate(HEMA) and phenylboronic acid-modified HEMA
116. Synthesis and characterization of poly(methyl methacrylate) beads:Investigation of the effect of initiator conentration and stirring speed
117. Optimizing PVP Concentration for Efficient Silver Nanowire Synthesis inElectrically Conductive Polymer Nanocomposites
118. Improving the impact strength of recycled HIPS by increasing the rubberphase proportion and studying mechanical properties
119. Investigating the mechanical-thermal properties and solubility of PVAbasedfilm
120. Effect of process parameters on the Mechanical and Morphological propertiesof electrospun polyurethane nanofibers based on PEG/ PCL Soft segments
121. Synthesis and mechanical properties of Cycloaliphatic Epoxy Resin withProduction of prepreg and dual cure
122. Encapsulation of ۱-methylimidazole as curing agent of epoxy resin andevaluation of it’s release behaviour
123. Recent Advances in Polymeric Substitute for Tendon Treatment
124. mechanical properties of Bismaleimide/Diallyl BisphenolA
125. Curing ۴,'۴-bis(maleimide)diphenylmethane resin with Solution aliphaticamines and triallyl cyanurate
126. Synthesis of chitosan-acrylic acid/multiwalled carbon nanotubenanocomposite hydrogels and investigation of their rheological behavior
127. Methodology of Evaluating Stress Relaxation Phenomenon for ElastomericParts by Time-Temperature Superposition and Finite Element Method
128. Mechanical properties of functionalized chitin nanowhiskers filled chitosancomposite membranes for direct methanol fuel cell applications
129. An advanced geometrical approach for the prediction of tensile strength inbinary polymeric blends
130. The application of Resilient back propagation algorithm in evaluation ofprocess parameters and modeling of mechanical properties for ۳D printingtechniques
131. Citric acid as an environment-friendly crosslinker solvent for preparationof Chitosan- Polyvinyl alcohol blend for tissue engineering application
132. Fatty Acid Conjugated Polymers for Biomedicine: Biocompatibility Evaluation
133. Self-Stratifying Behavior of a Light-Curable Coating Containing Bio-Renewable Materials: Study on the plasticizer type
134. Treatment of High-Strength Wastewater Produced by PolyesterManufacturing Industry
135. LDPE/PLA/EVA Ternary Blends: Toward Rheology, Morphology andMechanical Properties
136. Investigation of the effect of the reactive diluent on the curing kinetics ofepoxy-based resins
137. The effect of carbon nanotube on curing and mechanical properties ofEPDM/SBR elastomeric blend
138. Impact of Tackifier content on Pressure-Sensitive Adhesive based on acrylicpolymer
139. Investigation of competitive adsorption of Cu(II) and Pb(II) by imidazolatezeolite framework(ZIF-۸)
140. Investigation on Chitosan as a promising polymer in the treatment ofbone defects
141. Nanosilica/poly(styrene-acrylate) nanocomposite films as effective dampingand sound absorber coatings
142. How does a self-crosslinking monomer affect the adhesion performance ofan acrylic pressure-sensitive adhesive?
143. A Novel Reactive Vitrimrimer-Like Temperature Responsive Polymer:Synthesis and Characterization
144. Evaluation of thermo-physical properties and thermal energystorage performance of phase change material systems
145. ISPST ۲۰۲۴ Conference: Increasing Cross-linking in Polyvinyl pyrrolidoneHydrogel for Strength in Bone Fracture Treatment by Sodium alginate
146. Eggshell Powder Filled Starch Green Composites
147. A Comprehensive Study of Compatibilized PLA/EVOH Blends: Rheological,Thermal and Mechanical properties
148. Enhanced Mechanical Properties of Epoxy-Based Composites Reinforcedwith E-Glass and Aramid Fibers
149. Enhancing Epoxy Resin Properties Through One-Step Modification withPolymeric MDI
150. The Effect of γ-Aminopropyltriethoxysilane (γ-APS) on the Adhesion ofEpoxy Resin to Carbon Steel Surfaces
151. Water Absorption and Biodegradation of Green Biocomposites Based onThermoplastic Starch/Benzylated Rice Straw Filler
152. Preparation of Alginate-Tragacanth Gum core-shell microcapsule for tissueengineering application
153. Effect of Copper Metal on the Thermal Properties of Heterocyclic SchiffBase Polyesters
154. Near-Field Electrospinning of Polyvinyl Alcohol and Gelatin Blend forTissue Engineering Applications
155. Correlating the Crack Growth Resistance and Pattern in NR/ENR/SilicaSystem to the Silica Localization
156. pre-Treatment of E-Glass fibers using Acid Etching Method
157. Effect of Grafting Silane coupling agent on the glass fibers /epoxycomposite
158. Optimization of Amine-Epoxy Adduct Adhesives: Effects of SolventComposition on Mechanical Properties and Amine Value
159. Effect of EPDM and high density polyethylene (HDPE) on mechanical andphysical properties polypropylene filled with ۲۰% talc
160. Influence of DCP content as a curing agent on the shape memory behaviourof thermoplastic vulcanized PLA/NBR
161. An Investigation on The Influence of Mixing Impeller blade Thickness andDiameter on The Dispersion of TiO۲ in Water-Based Acrylic Paint
162. Studying the mechanical properties of PVC/CaCO۳ nanocomposite
163. Hydrophobic Silicon-Based Coatings on Metal Surfaces: Development viaSol-Gel Process and Characterization
164. Assessing the influence of mixing time and porogenic solvent on thecharacteristics of microporous PolyHIPE monoliths
165. Preparation of Enzymatically-gellable Collagen-Chitosan Hydrogels forLiver Tissue Engineering
166. Pairwise Droplet Deformation in Complex Geometries: Effects of VariousParameters Using Lattice Boltzmann Free Energy Method
167. Investigation of Flow Patterns in Various Geometries with Different BafflesUsing Lattice Boltzmann Method
168. Synthesis and preparation of an aqueous dispersion of epoxy-urethane usedin electrodeposition coatings
169. Development of antibacterial packaging films via sonication based onpolyethylene/ZnO nanoparticles
170. Preparation of Multifunctional Quaternary Composite ofPVP/PVA/QCS/DEX Hydrogel as a Promising Wound Dressing
171. Investigation the deformation of Multi-layer composite after the curing cycle
172. Preparation of Magnetic Dextran/Graphene Nanocomposite andInvestigation of Their Properties
173. Tuning Graphene Oxide Oxidation Degree for Enhanced Strain Sensing andMechanical Properties in PVA/GO Composite Hydrogels
174. Impact of Crosslinking Degree on Epoxy Membrane Performance
175. How Does Blending Affect Creep Resistance of Natural Rubber-SilicaComposites?
176. Synthesis of Polyvinyl Alcohol-Polyvinylpyrrolidone Hydrogel Films
177. Modeling temperature gradient of printed ABS filament in ۳D Printer
178. Effects of Abrader Roughness on Particle Size of Worn Rubber Compoundsin Fatigue Wear
179. Waterborne Vapochromic Colloidal Nanoinks and ThermochromicNanocapsules for Monitoring Meat Storage and Spoilage
180. Antibacterial cellulose acetate@ZIF-۸ nanofibers for wound dressingsapplications
181. improving polypropylene /polyester compatibility to improve the mechanicalproperties of recycled polypropylene
182. A Tissue-Adhesive, Wound Contracting, Injectable, Electroconductive andAntioxidant, Granular Hydrogel for Diabetic Ulcer Regeneration
183. Circular economy approach of recycled polyethylene: Influence of peroxidetype and its percentage on molecular structure and rheological properties
184. Improvement of Melt Strength in Polylactic Acid through Chain Branching
185. ۳D printing of silk fibroin/alginate/Montmorillonite scaffold for bone tissueregeneration
186. Effect of Isocyanate and Polyol Mixing Speed on The Microstructure andProperties of ۲k Polyurethane Foam
187. Synthesis and Investigation of Surface Chemistry of ZwitterionicPolyurethane Coatings
188. Removal of organic solvents from contaminated water by organogels basedon butyl acrylate and ۲-hydroxy methacrylate
189. Preparation of flexible conductive hydrogels based on gelatin
190. Synthesis and charecterization of pH-responsive hybrid hydrogels based onchitosan, acrylic acid and ۲-hydroxyethyl methacrylate
191. Preparation and Evaluation of Polymer Electrolyte Membranes Based on SulfonatedPolystyrene/Polyvinyledene fluoride for Lithium Ion Batteries application
192. Poly(vinylidene Fluoride) as an Polymer Electrolyte in Lithium-IonBatteries
193. Tailoring Nanocellulose Properties through Surface Modification:An Elemental Analysis Approach
194. Using Polyaryl Polymethylene Isocyanates For Microencapsulation ofIsophorone Diisocyanate by Interfacial Polymerization Method
195. Synthesis of hydrogel composites -based deep eutectic solvents fordesulfurization from Fuel
196. Fabrication of composite using activated carbon prepared from date kernelpowder with polyaniline and polypyrrole copolymer as supercapacitor
197. Investigating the effect of the presence of recycled rubber powder on therheometer and other properties of the rubber compound SBR/BR
198. Sensitive Electrochemical Detection of Imidacloprid Pesticide usingGraphene Quantum Dots/ silver nanoparticles /Polyaniline NanocompositeModified Electrode
199. Investigating the effect of antimony-modified vermiculite as a flameretardant in polymer composites
200. Mechanical Properties of ABS/TPU Blends with Different WeightPercentages.
201. Rheological Insights into Examining the Molecular Weight Distribution ofPolyethylene: Distinguishing Between Unimodal and Bimodal Distribution
202. Fabrication and investigation of physical and mechanical properties ofhydroxyapatite nanocomposite scaffold in bone tissue engineering
203. The Effect of Addition-Fragmentation Chain Transfer Agent on Shrinkage-Induced Stress in acrylate Monomers
204. Ratiometric Optical pH Sensor Based on Photoresponsive Polymers
205. White Light Emission Utilizing MXene Quantum Dots and PhotoresponsivePolymer
206. Development of a Dual Stimuli-responsive Polymers for TrackingTemperature
207. Hybrid composite of metal-organic framework/smart polymer for gasdetection
208. Study on the performance of dipotassium polysufides and silicon-graphiteelectrodes in potassium-sulfur battery
209. Stimuli-Induced Wettability Conversion in Spiropyran-FunctionalizedPolymeric Nanofibers
210. Photo- and hydro-responsive inks for double-encryption applications
211. Synthesis and Characterization of PMMA-based Microbubbles withPerfluorohexane Core
212. Preparation and identification of nanocomposites, polyurethane/chitosanand multi-walled carbon nanotubes and their effects in cardiac tissueengineering
213. Experimental Insights into Viscosifying Behavior of Polyacrylamide Relatedto Oil Recovery Applications
214. Experimental Study on Rheology and Thermal Stability of HPAM SolutionImproved by Silica Nanoparticle; Application in Enhanced Oil Recovery
215. Improving the Stability of Perovskite solar cells by using NiOx instead ofSpiro-OMeTAD in the HTL layer
216. Improving Rheological and Barrier Properties of Poly(LacticAcid)/Poly(Butylene Adipate-co-Terephthalate) Nanocomposites via MOF-۲Metal-Organic Framework Integration
217. Effect of silica coating on the oxidation and thermal degradation of reusablelightweight heat shield based on carbon foam
218. Improved the rheological properties of recycled polyamide ۶ usingmultifunctional chain extenders
219. Determining Critical Concentration for Chain Entanglement in PolymericSolution and Modeling the Jet Behavior During Electrospinning Process
220. Synthesis and Characterization of Poly(acrylamide-co-N-vinylpyrrolidone)Copolymers via ATRP for Enhanced Oil Recovery Applications
221. Synthesis of magnetic polystyrene nanocomposite by emulsionpolymerization for oil adsorption
222. "Synthesis of Polyaniline (PANI): A Comprehensive Study on itsPreparation and Characterization
223. Enhancing the electrorheological properties of chitosan through theinclusion of zinc oxide and cellulose fibers
224. Investigating the Water Reabsorption Kinetics of Modified BacterialCellulose by In-situ and Ex-situ Methods
225. Mosquito-repellent finishing of cotton fabric with dendriticpolymers/DEET/essential oil to create a protective layer
226. Anti-corrosion epoxy coating containing electrospunpolyacrylonitrile/polyaniline micro/nanofibers
227. Synthesis and Characterization of Redox-Sensitive Polymeric Nanomicellesbased on Hyaluronic Acid and Alendronate
228. Synthesis of Poly(vinyl chloride)-g-Poly(butyl acrylate) Plasticizer via AtomTransfer Radical Polymerization Method
229. Balancing Water and Ink: A Study on Fountain Solution Parameters inOffset Printing
230. preparation and corrosion resistance of a titanium-zirconium-tartaric acid(TZT) conversion coating on HDG steel.
231. Synthesis and Characterization of Self-healing Polyurethane
232. X-ray analysis study of porous polycaprolactone/claynanocomposites
233. The Effect of Hard-Segment Chemistry on Phase-Separation of Single-IonConducting Polyurethanes
234. The role of varios ultrasonic welding horns on the adhesion strength ofthermoplastic polyurethane
235. Solubility and phase transfer of insoluble dyes in organic solventusing an amphiphilic multi-block polyurethane reverse micelle
236. Synthesis of solubile sulfur-containing polymers via Thiol-Ene click reaction
237. Synthesis and characterization of an amphiphilic multi-blockpolyurethane based on oleic acid using diisocyanate method
238. Delving into mechanism of self-reporting coatings based on color changingmechanism
239. Investigating the effect of the material of the ISD on the biomechanicalbehavior of a segment of the lumbar spine
240. Calenendering of the Oldroyd-B fluid
241. Multi-Functional Additive for Polypropylene:Temperature-Sensitive Nucleating Agent with Antioxidant Properties
242. Investigation of cerium-based conversion coating as a suitable alternative tochromate conversion coating
243. Coupling finite element model with material properties optimizationalgorithm for mechanical characterization of polyvinyl alcohol hydrogel forcartilage tissue engineering
244. Acidochromic anticounterfeiting inks and smart sensors from azobenzenecontainingpolymer particles
245. Synthesis of PVC thin film nanocomposite membranes and investigation oftheir performance
246. Synthesis of high-temperature Calcium complex greases and comparingtheir thermal performance with Calcium grease
247. New Leaf Plastination Technique for Tissue Preservation by a Novel PolyEster Resin
248. Preparation of nanocomposite concrete improved with modified rubberpowder
249. Dyeing of cellulosic fabrics using a multipurpose encapsulated blue pigment
250. New poly(ether sulfone fluorene)-based support layer for TFC membranedesalination application
251. A Study on Tack of Crosslinked Acrylic Pressure-Sensitive Adhesives
252. Synthesis of UV-resistant nanocomposite coating based on epoxy vinyl esterresin
253. Synthesis of Polyurethane Based on Lactic Acid and Investigation of the Miscibility ofPolylactic Acid with Polyurethane
254. Synthesize and Study of Double Network Hydrogel Electrolyte for use inWearable Supercapacitors
255. Smart Polymeric Foams Based on LDPE/EVA/MWCNT Nanocomposite:Correlation Between Micromorphology and Shape Memory Behavior
256. Fluorescent PLA filaments: ۳D printing with fluorescent inks
257. Chitosan-Coated Alumina Nanoparticles for Fabrication of a FunctionalComposite Membrane for CO۲ Separation
258. Simple and Green Synthesis of CQD@PANI for Use as an Electrode inSupercapacitors
259. Investigation Of The Effects Of Nano Graphene Additive On The Mixed FractureBehavior Of Epoxy Adhesive
260. Biological Adhesive with Antibacterial Properties
261. Preparation of PTSLIPS coatings based on polyurethane and investigationof their hydrophobicity and anti-icing properties
262. Preparation of poly(acrylamide-co-Acrylic acid) hydrogels in presence ofcellulose nanowhisker(CNW) : mechanical and morphological study
263. Preparation of Nanocomposite Hydrogels Based on Alginate for Wound HealingDressings
264. Polyurethane-based nonocomposites reinforced by graphene and siliconoxide:An investigation into thermal and electrical Properties
265. Multifunctional Active Food Packaging Based on Bionanocomposite
266. Synthesis and characterization of new triazine-based porous organicframeworks as adsorbent for cationic and anionic dyes
267. Effect of TiCl۴-Mg(OEt)۲ reaction temperature in a Ziegler Natta catalyst
268. Synthesis and characterization of PU/Alg/Honey hydrogel, containGraphene oxide nanoparticle
269. Layer-by-Layer Electrospun Polyurethane Nanofiebrs with Fluorescence,Shape Memory, and Halochromism
270. The effect of various structures of functional monomers and long-chain α-olefins on their polymerization reaction
271. Determination of Miscibility and Interaction Parameter of PolymerMixtures in Dilute Solution
272. The effect of electric fluid on the production of polyethersulfonenanocomposite fibers using the electrohydrodynamic method
273. Designing and manufacturing of mono-focal intraocular lenses based onmethyl methacrylate resin
274. Effect of solution concentration on nano composite fiber prepared usingelectrohydrodynamic method
275. Copolymerization of ethylene-methylacrylate by α-diimine nickel (II)catalyst with electron-withdrawing substituents
276. Effect of Polyol Molecular Weight on Adhesion Properties of a PolyurethanePressure-Sensitive Adhesive
277. Effect of Hard Segment Content on Adhesion and Mechanical Properties ofThermoplastic Polyurethane Adhesives
278. A study on the electrohydrodynamic spinning of Janus fibers
279. Effects of Processing Conditions on the Degassing Time and Properties ofXLPE Cable Insulation
280. The effect of glass fibers on the protective and mechanical properties of Xrayshielding polymer composites
281. Crystallinity Determination of Poly(vinyl alcohol) Using DifferentialScanning Calorimetry
282. Development of a Novel Thermally Curable Waterborne PolyurethaneAcrylate (WPUA) Coating with Enhanced Mechanical Properties
283. Effect of chain extender on mechanical properties of recycled polyamide ۶
284. Citric Acid-Based Quantum Dots Crosslinked Nanofibers: A NovelApproach for Antimicrobial Wound Healing Applications
285. The Effect of Polypropylene Molecular Weight Distribution on BiaxiallyOriented Film Stability in the Tenter Process
286. Investigation of the Synergistic Effect of Artificial Intelligence and ChitosanNanoparticles in Targeted Drug Delivery for Cancer Treatment
287. Reducing Heave Response Amplitude Operator of A Semi-submersiblePlatform Attached by Styrene Butadiene Rubber Composites
288. Exploring a self-healing hydrogel electrolyte: Fabrication andsupercapacitors applications
289. The effect of reaction media on the upper critical solution temperature ofthe acrylamide and acrylonitrile copolymers
290. The Shape Memory behavior of neat and cross-linked Poly (ethyleneterephthalate)
291. Improving the rheological and mechanical properties of polypropylenegraft-maleic anhydride (PP-MA) by chain extending
292. Synthesis of bio-based internal Cross‐linker based on Adipic acid forpreparation of Superabsorbents polymer
293. Preparation of a stretchable, conductive, flexible, and biodegradablenanocomposite hydrogel for human motion detection
294. Study of initiator concentration on the degree of GMA grafting for highdensitypolyethylene
295. The Effect of Heparin Grafting on Surface Modification andHemocompatibility of Polylactic Acid
296. Thermo-responsive smart gels for sensors and controlled coloring
297. Preparation and characterization of polyvinyl alcohol/citric acid-basedwound dressings
298. The Effects of Reaction Variables on the Grafting of Polystyrene ontoGround Tire Rubber
299. Physically-Crosslinked, Polyvinyl Alcohol-Laponite NanocompositeXerogels: Preparation and Physicomechanical Characteriztions
300. Prepration of Polymeric Nanohydrogels for Canacer Treatmet
301. Examining the impact of polymer coatings on the bolts and nuts used inpetrochemicals
302. Rheological Screening of PVA Solutions for Thin Film-forming Processes
303. The effect of UV light Exposure time on physical properties of Coumarinbasedshape memory polyurethane
304. Efficiency of different bonding methods for thermoplastic surfaces in microfluidic applications
305. Rheological and Thermal Charactrization of Accelarated Weathering ofIntustrially Produced Polyethylene: Effect of the Molecular Structure
306. Simulation of ۱,۳-butadiene Emulsion polymerization by ASPENPOLYMER PLUS®: Effect of two different emulsifiers on kinetics
307. Synthesis and adsorption investigation of hydrogel/zinc nanooxide/carbondot composite for removal of environmental pollutants
308. Synthesis and Characterization of Hyaluronic-based AmphiphilicSelf-assembling Biopolymeric Nanoparticles
309. The effect of silica nanoparticles on the mechanical and self healingproperties of ENR/silica nanocomposites
310. Investigation of polyethyleneterephtalate modification on the graphene oxidecoating and it’s water absorption
311. Investigation of swelling ratio, mechanical stability and cationic dyeadsorption of PVA/Alginate-based hydrogel beads
312. Study the Effect of Structural Factors on the Rheological Behavior ofPolyacrylic acid Solutions
313. The Effect of B۴C Concentration on the Shielding Property ofPolydimethylsiloxane/Novalac
314. Enhanced Performance of Flexible Electrochemical Sensor by PolypyrroleMicroparticles Decorated Laser-induced Graphene For SimultaneousDetection of Dopamine and Ascorbic Acid
315. Surface attachment of gold nanoparticles on di-block copolymer template
316. Bionanocomposite Hydrogels Based on Silk Fibroin/poly )ionic liquid(Incorporated with Bioactive Glass Nanoparticles for BiomedicalApplications
317. Mechanical Properties of ۳D-Printed Denture Base ResinReinforced with Polyester Fabric
318. Study on material parameters and processing conditions on porosity, poresize and properties of PTFE sheets made via sintering
319. Post-UVO effect on Polyvinyl Chloride membranes for removal of oilpollution from aquatic environment
320. Bacteria Removal Performance of PVDF Microfiltration Membrane Prepared byVIPS Method
321. Reducing the Use of Agricultural Pesticides in Greenhouses Using ColoredSticky rolls
322. Novel demulsifier based on metal-organic framework modified byphotochromic compounds for demulsification of crude oil emulsions
323. Synthesis of Polybenzidine-Heptamolybdate Nanoneedles onto anodizedgraphite sheet as a new supercapacitor electrode
324. Modified Curcumin Eco-Friendly Coating: A pH-Sensitive Approach toEnhanced Anti-Corrosion Performance
325. Comparing the Behavior of Single and Double Network Hydrogels UnderLarge Amplitude Oscillatory Shear (LAOS)
326. Electrochromic devices based on viologen-containing hydrogel electrolytes
327. Polymer quantum dots for luminescent solar concentrators
328. Preparation and Characterization of PVA-Polyurea/IPDI microcapsules viainterfacial polymerization: The effect of different amines
329. Preparation and Characterization of Polyvinyl alcohol Thin Films
330. Development of a Fire-Resistant Coating for Polypropylene Fibers UsingReactive Phosphorus and Nitrogen-Based Materials
331. Synthesis and properties of polylactic acid-starch-malonic acid biofilm
332. Evaluation of Peel Strength of a Polyaniline/Acrylic Anti-Static Pressure-Sensitive Adhesive
333. Dual pH-Enzyme Responsive Host-Guest Micelles for Targeted SenescentCell Therapy
334. Improving the curing process of ۲,۲'-bis (۴-cyanatophenyl)propane by usingcopper(II) acetylacetonate in order to increase the degree of cure
335. Long-Term Storage of Polyurethane-Acrylic Hybrid Pressure-SensitiveAdhesive
336. Polycaprolactone-Grafted Chitosan-Based Electrospun Shape MemoryPolyurethane Nanofibers
337. Polymerization of isobutylene in the presence of ionic liquids
338. Kinetics of Thermal Degradation of Flexible Polyamine-Epoxy Systems
339. Synthesis of isobutene polymers using AlCl۳ initiator system containingsulfonated polymer ionic liquid
340. Investigation of solvents permeation through a multi-layer bottle andProposing a New Method for Determining Solvent Permeability
341. Effect of UFNBR on the Chemoviscosity of Epoxy Resin
342. Effects of cell structure on Swelling behaviors of nitrile rubber foam
343. ۸-Hydroxyquinoline-۵-Sulfonic Acid/Zinc-Doped Polyaniline Nanocompositein Epoxy: A Robust Solution for Anticorrosion and Self-Healing Applications
344. Effect of amino-functional polyhedral oligomeric silsesquioxane ontoughness of epoxy resin
345. Effect of using nucleating agent on structure and features of Polyethylenefoams
346. Effect of Processing Parameters on Printability of Polyurethane, Using ip۳DPrinting
347. Preparation of a highly selective fluorescence sensor based onCQDs/PVA/Chitosan nanofiber
348. Evaluation of adsorptive characteristics of PMMA-co-poly(HEMA-co-MMA) electrospun nanofibers for the removal of cationic dyes
349. Selective localization of CNTs in PLLA/TPU blends and its effect onrheological and thermal properties
350. A novel facilitated transport membrane containing PEBA/Polysaccharidefor CO۲ separation
351. The effect of densities on the dielectric constant of the polystyrene foam
352. Synthesizing and Investigation on the Effect of Delayed Action AmineCatalysts on Elastomeric Polyurethane Foam preparation
353. The Swelling Properties of Chitosan/Agar Chemically Cross-linkedHydrogel Beads
354. Continuous Preparation of Core-Shell Capsules for CO۲ Detection UsingPhotosensitive Polymeric Resins
355. Synthesis and characterization of bioplastics, Polyhydroxyalkanoates (PHAs) produced fromAgricultural waste by using Pseudomonas and Bacillus spp
356. The application of heat-treated crumb rubber to simultaneously augmentthe compression-impact strengths of cementitious mortars
357. Synthesis of zinc para-aminobenzoate and investigation of it,s effect as PVCgreen thermal stabilizer
358. Surface Modification of Cellulose Nanofibers using Graft Polymerization ofPMMA and PBA to Reinforce LDPE/TPS/PE-g-MA Nanocomposites
359. Curing kinetics of epoxy nanocomposites containing UFNBR: ModifiedHorie model for new description using the DSC method
360. Thermal-electrical investigation of thermpolastic polyurethane/poly(vinylidine flouride) nanocomposites filled with carbon nanotube
361. The effect of barite, silica, and alumina fillers on the cathodic disbondmentand corrosion resistance of epoxy phenolic coating
362. Developing Novel Strategies for the Synthesis and Stabilization of PolymericPolyols: Exploring the Role of Non-Aqueous Dispersants in Enhancing FoamProperties
363. Effect CB on magical triangle of High performance Tire
364. Investigating the Distribution of Hybrid Nanoparticles in Epoxy Resin UsingUniform Magnetic Current
365. Antibacterial Copper Nanoparticles-Containing Electrospun Nanofibers forWound Healing Applications
366. Phase Change Material Nanoemulsions: Liquid to Gel Transition
367. Improving the performance of contrast agents used in MRI by usingpolymer particles loaded with superparamagnetic nanoparticles
368. Chemical Recycling of Flexible Polyurethane Foam WasteUsing Sebacic acid as an Acidolysis Agent
369. Kinetic parameters of sulfur curing of chlorosulfonated polyethylene (CSM)rubber with Han's model
370. Investigating the effective parameters on the particle size distribution ofemulsion polymerization of methylmethacrylate
371. Super Low Density Elastomeric Polyurethane Foam Systems ContainingStyrene-Grafted Polyester Polyol and Their Use In Shoe Soles Production
372. Two-dimensional (۲D) Transition Metal Carbides/nitrides -APTES/Co-MOF Reinforced Epoxy Composite Coating for Smart AnticorrosionApplication
373. Tunning the Porosity of Polystyrene-Base Beads with Well-Defind PorogenSynthesized via RAFT Polymerization
374. Study of molecular orientation effects on the Polypropylene oxygenpermeability
375. Preparation of polyethylene vitrimer by using reactive processing
376. Effect of pectin on the stability of Lemon essential oilnanoemulsion
377. Efficient Stabilization and Enhanced Dispersion of Graphene viaHyperbranched Polyethylene-Assisted Liquid Phase Exfoliation
378. Electrospun Alginate Sulfate-Based Nanofiber: Morphology Assessment
379. The effect of polymer and inorganic additives on the optical properties ofCdSe quantum dots used in water-based inks
380. Synthesis of ZnO/Polypyrrole Composite nanoparticles
381. Synthesis and evaluation of thermoplastic polyurethanes (TPUs) by solutionmethod for textile coating
382. Influence of Reaction Temperature on Blocking rates of Isocyanate in BatchReactors
383. The role of rotor speed on the void fraction and relative density of EVA/NRFoam
384. Critical point of gelation in hydrogels : A short review
385. Comparing pellet-based (granular) and filament-based ۳D printing inmechanical properties of ABS/wood flour composites
386. Eco-friendly and Cost-effective Approach to the Synthesis of Bio-basedLight-cure Acrylate Resins
387. Increasing productivity of suspension polymerization of vinyl chloridemonomer using cocktail initiators and acid catalyst
388. Synthesis and Characterization of Cellulose Nanocrystal-Grafted PolybutylAcrylate with the Potential of Drug Delivery Applications
389. Exploring the Influence of Shell Feeding Method on the Properties ofStyrene/Acylate Latex Interpenetrating Polymer Network with Core-ShellStructure
390. Synthesis Novel Light-Responsive Polymeric Surfactant for Preparing PLGANanoparticles
391. An Investigation on the Physical/Mechanical Properties of PolymerNanocomposites Containing Aggregated and Agglomerated Nanoparticles
392. Synergistic Effect of Nano composite- Natural Surfactant Dispersed in LowSalinity and on Oil Recovery: wettability alteration and Interfacial tensionreduction
393. Effects of slip-agents and anti-blocks on the printability of polyethylenefilms and their roles in the formation of a weak boudary layer
394. Investigating the Relationship between Tack and Viscosity of Epoxy/GlassPrepreg without pre-curing
395. Using Coaxial Electrospray to Produce Polysorbat ۸۰ coated nanoparticlesfor Use in Magnetic Resonance Imaging
396. Synthesis of Biodegradable Low-Molecular-Weight PBAT from RecycledPET
397. The effect of curing temperature on the peel strength of polychloroprenebasedrubber adhesive
398. Synthesis of High Functionality Poly(ester-amide) Polyols and Investigation of TheirDerived Rigid Polyurethane Foams
399. Mechanical Properties of Oil-extracted Rubber Powders and PotassiumPermanganate-Modified Rubber Powders blended with Nitrile Rubber
400. Eco-friendly Strategy for Preparing Open-cell Lightweight and Low-costPoly(lactic acid) Foams for Marine Poluttant Absorbent Applications
401. Determining kinetic triplet of polybutadiene filled ZnO composites usingICTAC recommendations
402. The effect of modified carbon black on filler dispersion and dynamicproperties of natural rubber nano compounds
403. Surface modification of cyclodextrin/lignin biopolymer microparticles withpolyethylene for fast and selective removal of anionic dyes
404. Fabrication and characterization of poly (vinyl alcohol)-poly (ɛcaprolactone)and poly (vinyl alcohol)-poly (lactic acid) core-shell nanofibers
405. Copper Phthalocyanine Loaded Poly (lactic acid) Nanoparticles by DoubleEmulsion Methodology for Photothermal Therapy
406. Preparation and Evaluation of Poly (lactic acid)/Poly (vinyl alcohol)Nanoparticles as a Drug Delivery System
407. Investigation of mechanical properties of ternary PVC/ABS/PLA bioblends
408. Investigating the possibility of obtaining ultra-light weight concrete usingpolyurethane waste and its performance in removing lead pollutants fromcontaminated water
409. Approaching Ratio of Solution as a Key Parameter Affecting theCharacteristics of Porous Films Prepared via EIPS
410. Investigating the Effect of Cross-Linking on the Shelf Life of SBR RubberCompounds Using the Principle of Time-Temperature Superposition
411. Synthesis and Characterization of Unsaturated Poly(ester-urethane) as Self-Healing Structural Adhesive
412. Co dinuclear catalyst for methyl methacrylate polymerization
413. The Impact of Surface Treatment of Waste Tire Powder on Abrasion,Hardness, and Swelling Properties of Waste Powder/Nitrile Rubber Blends
414. Synthesis and characterization of double cross-linked PolyhydroxyurethaneWound Dressings based on Diels-Alder click reaction and covalent bonds
415. Prediction of different times of sulfur curing rubber using a recurrentneural network
416. The Chemical Recycling of polyurethane foams and its transformation intopolyol
417. Pectin-based nanocarriers for liver cancer therapy
418. The influence of barium sulphate content on the flame retardancy of novolacepoxy based coating
419. Synthesis of MDI-based thermoplastic Polyurethane film and investigationof chemical monomer recovery via Glycolysis
420. Preparation and phase behavior study of PVC/PMMA/PLA bioblends
421. Effect of central metal on activity of the metallocene catalyst supported onmagnesium chloride adduct in ethylene polymerization
422. Exploring the encapsulation and analysis of eutectic salt through theapplication of silicon-based agents
423. Copolymerization of Ethylene and ۱-Hexene Using MgCl۲-Adduct-Supported Metallocene Catalyst
424. The effect of pre-impregnation of short fibers on the dispersion, distribution,and mechanical properties of short carbon fiber/ABS composites
425. Exploring the Potential of Zinc Maleate/Magnesium Carbonate for ThermalStabilization of Polyvinyl Chloride
426. Single-step ۳D printing of porous structures based on carboxymethylchitosan for wound dressing application
427. Investigation the effect of sulfuric acid on Thermal and Acid resistance ofEpoxy Novolac coating
428. Synthesis and characterization of Carboxymethyl chitosan-bioactive glassnanohybrids for bone tissue engineering applications
429. Rheological study of biomimetic bio-ink based on carboxymethyl chitosansulfate/ Methylcellulose for ۳D bio-printing applications
430. Synthesis of Mg-MOF-۷۴ at ambient temperature and its use in Mg-MOF-۷۴/polyurethane mixed matrix membrane for gas separation
431. Preparation of anticancer drug carrier particles based on ۲-hydroxyethylmethacrylate
432. Antibacterial Hydrogel with Aligned Porous Structure Based on SilkFibroin/Poly(ionic liquid) Using Bidirectional Freeze Casting Technique
433. In-Situ Synthesis of TPU/MXene Nanocomposites;The Role of Interfacial Interaction on Mechanical Properties
434. Immersion precipitation printing of PVDF
435. Covalent triazine polymer/melamine formaldehyde microsphere compositefor anionic dye removal from wastewater
436. Fabrication and Characterization of Polyvinyl Alcohol/Polyethylene GlycolNanofibers
437. Synthesis of Lithium and Calcium complex greases delivering hightemperatureperformance for high-speed bearings
438. Novel Visible Light Photoinitiator for Hybrid Resins:Mitigating Shrinkage in Vat Photopolymerization
439. Distribtion and Precipitation Rate of CIPs in DMF/TPU composites
440. Effect of Recycling Cycles on MFI and Tensile Properties of HDPE
441. In-depth study of mechanical properties of poly(lactic acid) / poly(butyleneadipate-co-terephthalate)/ nanosilica blend nanocomposites
442. A study of the efficient and environmentally friendly method of acetylationof lignin sulfonate biopolymer
443. Preparation of gelatin-based self-healing hydrogels for enzymeimmobilization
444. Dual cross-linked Polyhydroxy urethane tannic acid with Photothermal andantioxidant properties as wound dressing material
445. Investigating the effect of HTCC on SA-based hydrogel printability
446. Melting behavior of poly(۳-hexylthiophene) nanofibers in solution
447. Oligomerization of Isobutylene into the Related Lubricant in the Presence ofDendritic Ionic Liquid
448. The Effect of B۴C Concentration on the shilding properties ofpolydimethylsiloxane
449. Synthesis, characterization and performance of nanocomposites containinggraphene oxide- polyaniline doped with phytic acid
450. Synthesis and Characterization of Catalyst-free polyolefin elastomervitrimer
451. Eco-innovation: Synthesis and Characterization of BiodegradableBioplastics Enhanced with Zinc Oxide Nanoparticles
452. Investigation of stress distribution around Supraspinatus tendon injurieswith and without PU scaffold
453. How does curing induced phase separation control the carbon black nanostructuring which enhances its epoxy-based nanocomposite conductivity?
454. An Investigation on Click Chemistry-based Gelation of CarboxymethylChitosan Sulfate/Oxidized Alginate Injectable Hydrogel
455. Investigation of the physical properties and water resistance of waterbornepolyurethane synthesized based on castor oil
456. Morphological study of ۳D printed foam-like polyurethane using ip-۳Dprinting
457. Effect of silica nanoparticles on tensile strength of flexible polyurethanefoam
458. Effect of Shape and Size of Aluminum Flakes on the Sparkle Property ofMetallic Coatings
459. Effect of Shape and Size of Aluminum Flake on Graininess Property ofMetallic Coatings
460. Preparation and investigation of silica nanoparticles on the lap shearstrength of reactive hot melt polyurethane adhesive
461. Preparation of a Semiconductor Acrylic Pressure-Sensitive Adhesive UsingSurface-Modified Copper Nanoparticles
462. Preparation and Morphological Study of Biphasic Janus Microparticles andMicrofibers
463. Sandwich Strain Sensors Based on TPU/MXene Nanocomposites Fabricatedby Spin-Coating Technique
464. CdS Nanorods as Photoinitiator for Homo/Copolymerization ofMethylmethacrylate and Ethylmethacrylate in Presence of β-cyclodextrin
465. Effect of the Particulate and Resin-Based Reinforcement on the Static andDynamic Crack Growth Resistance
466. Modification of inorganic clay drug nanocarriers via biodegradablepolymers to improve controlled-release drug delivery
467. Preparation of a self-healing, conductive and strain sensitive degradablehydrogel sensor for multifunctional human motion sensing
468. Evaluation of Biochar and Bio-oil yield of PLA/Rice Biocompositespyrolysis
469. An Efficient Combination of Genetic Algorithm and Population BalancesModeling for Prediction of Droplet/Particle Size in Inverse Suspension
470. From Waste to Value: Converting Epoxy Thermosets into Vitrimers for aSustainable Circular Economy
471. Synthesis and characterezation of polyacrylic terpolymer containingspiropyran as photochromic coating
472. Towards Eco-Friendly PVC Thermal Stabilization with a Multi-StabilizingMechanism via Calcium Maleate, Calcium Stearate, and Zinc StearateHybrid
473. Effect of Redox Initiator Concentration on Grafting Parameters andAdhesion Strength of Persian Gum-g-Polyvinyl Acetate Wood Adhesives
474. Investigating the effect of aminoglycoside on the hydrophilicity ofpolydopamine coatings
475. Investigating the electron donor effect in the Ziegler-Natta catalyst used inpolyethylene gas phase processes
476. Improvement of interlayer bonding strength of ABS using ABS/TPU blend
477. Comparison of the Effect of ZnO or Oregano Essential Oil as anAntibacterial Agent on the Tensile and Hydrophilic Properties of PLA Film
478. Selectivity Assessment of a Novel Molecularly Imprinted Polymer in DyesMixture and Separate Aquous Solution
479. Designing a Self-healing, Adhesive and Antibacterial Double NetworkHydrogel based on Gelatin/Poly(Ionic liquid) for Wound Healing
480. Wet Chemical Synthesis of Sodium Sulfonated Polybutylene Fumarate-co-Acrylic Acid/nano hydroxyapatite Nanocomposite as Bone Scaffold
481. The effect of nanoclay on interfacial adhesion in PLA/PBAT/Nanoclaynanocomposites
482. Effect of Hard Segment Content on Peel and Tack of PolyurethanePressure-Sensitive Adhesives
483. Effect of Hybridization of Acrylic Copolymer and Polyurethane on Adhesionand Water Resistance of a Coating
484. Study on mechanical properties of poly(lactic acid)/cellulose nanocrystals(PLA/CNC) bio-nanocomposites
485. Efficient Chemical Recycling of Nylon ۶ Using Dual Catalytic Hydrolysis
486. Highly functionalized microporous polyurethane foam bearing aminothiacalix [۴] arene for removal of heavy metal such as Se(Ⅳ), Co(Ⅱ), Pb(Ⅱ)from aqeous solution
487. Investigation of polymer sutures with shape memory effect
488. Preparation of Carbon-silica aerogel nanocomposite for BTEX removalform waste gas stream
489. Design and Characterization of a Novel Aromatic Schiff Base WaterbornePolyurethane with Visible-light Triggered Self-healing Properties forAdvanced Materials Applications
490. One-Pot Production of Gel Polymer Electrolyte for Fabrication of Lithium-Ion Batteries
491. Preparing Magnetic Graphene-Based Nanocomposite as a Support forSynthesis of Molecularly Imprinted Polymers
492. Monitoring of the degree of curing of phthalonitrile high temperature resinby FT-IR spectroscopy
493. Development of New Epoxy Formulation Based on Dynamic Covalent Bondwith Self-Healing Ability
494. Corrosion investigation of hydroxyapatite/chitosan/glutaraldehyde hybridcoating on AZ۳۱ magnesium
495. The Relationship between Optical Properties and Molecular Characteristicsof Polyurethane-Acrylic Pressure-Sensitive Adhesives
496. Effect of Phenolic Nano-particles on the Performance of Sprayable SiliconebasedLightweight Ablative Heat Shields
497. Preparation of Hydrogel based on Natural Polymer for EnzymeImmobilization
498. Conductive Hydrogels with Photothermal and Antibacterial Activity forWound Healing
499. Incorporation of Especially Doped PANI into Epoxy Resin for Fabricationof Self-Healing Coatings
500. Investigating the effect of molar ratio of reactants on the mechanicalproperties of thermoplastic polyurethane
501. Investigating the effect of adding polyethylene glycol (PEG) on thewettability properties of thermoplastic polyurethane
502. Hydrogenation of PAO oils using a new heterogeneous Pd catalyst onγ-alumina
503. Visible light-activated polymerization using an easily synthesized dibromidecompound
504. Investigating the electromagnetic interference shielding properties of epoxybased coatings based on electric and magnetic fillers
505. Grafting Modified Nano-silver Particles on Polypropylene During ReactiveMelt Blending Toward Durable Antibacterial Nanocomposites
506. Fabrication of Double Network Hydrogels For Biomedical Applications
507. Influence of silane base internal donor on activity of Ziegler Natta catalyst
508. Modifying the toughness of poly(lactic acid) with various plasticizers: Areview
509. Enhancing the Thermoelectric Properties of Graphene Oxide throughModification with Polyhedral Oligomeric Silsesquioxane (POSS):Synthesis, Reduction, and Optimization
510. Tunning the Mechanical Strength and Adaptability in CrosslinkedPolyurethane Networks
511. Investigation of hydrophobicity and morphology of polymeric ink coatingcontaining APTES on cement and stone surfaces.
512. Ti₃C₂Tₓ MXene-Functionalized Nanosheets: A Versatile Approach forCorrosion Protection Applications
513. Polydopamine/ ۸-Hydroxyquinoline-۵-Sulfonic Acid DopedPolyaniline/Oxidized Multi Walled Carbon NanotubeNanocomposite: Advancing a Formidable Anticorrosion Agent
514. Preparation of degradable fiber mats for lithography applications
515. Brush Polymers as Additive for Fabrication of Nanofiltration Membranesand their Application in Dye/Salt Removal
516. Effect of silver concentration on antibacterial properties of bacterialcellulose-silver nanoparticles biocomposite
517. Simulation and Comparison of Polymeric Dampers Using RheologyParameters
518. Investigation of TiO۲ Effects on the Mechanical and Antibacterial Propertiesof Epoxy Acrylate Resin
519. Preparation and Investigation the Properties of Metal-Organic Framework–Reinforced Nanocomposites Based on PVA
520. Improving the performance of magnesium-based implants: Thesynergistic role of hydroxyapatite and titanium coatings incombating corrosion
521. Lifetime prediction of commercial HDPE films and increasing theirdurability
522. Understanding the Microstructure-Rheology Connection in PBS/PBATBiodegradable Blends: Implications for Energy Dissipation and Storage
523. Heteropoly acid immobilized on cyclodextrin polymer based catalyst forefficient synthesis of biofuel precursors
524. Mechanical properties of thermoplastic polyurethanes prepared by reactivemixing with various polyester polyols and diisocyantes
525. Investigation of TiO۲ Effects on the Mechanical and Antibacterial Propertiesof Urethane Acrylate Resin
526. The effect of NBR aerogel porosity on the thermo-physical properties
527. Synthesis of pH-sensitive DMAEMA-based copolymers and probing theeffect of chemical structure on their physicochemical properties
528. Study on the effect of graphene-glass flake hybrid on the anti-corrosion properties of epoxy nanocomposite coatings
529. Shape memory properties of plasticized polylactide
530. Combining simulation and measurement of rubber abrasion in Akronabrader to construct the abradability function
531. Polyhexamethyl biguanide -Releasing bacterial cellulose Membranes forAntimicrobial Wound Dressings
532. Investigation of sustained release of Centella Asiatica extract from Fe-MOFreinforced gelatin-based hydrogels
533. Combination of wet-impregnation and ۳D-printing approaches for designing۳D-printed catalytic monolith with improved features
534. Preparation of hydrogels based on alginate modified with imidazolium ionicliquids
535. Investigating thermodynamics of polyvinylpyrrolidone solutions inwater/acetic acid solvent using intrinsic viscosity
536. Thermal and mechanical properties of carbon nanotubes (CNT) reinforcedpoly(L-lactide) (PLLA)/thermoplastic Polyurethane (TPU) blends
537. Synthesis and characterization of pH-responsive intelligent packaging filmbased on polyvinyl alcohol/ chitosan/ cellulose containing curcumin
538. A novel composite based on SBA ۱۵NH۲ @MOF ۵@PANI as an electrodeefficient in supercapacitor
539. Optimization of Particle size and PDI of emulsion polymerized Polystyrene
540. Fabrication of opal hydrogel composite for humidity sensing
541. Synthesis of a novel clay/ Polyacrylamide /Cationic starch hydrogelcomposite for efficient removal of Acid blue – ۱۵۸, Methyl orange dyes andCr(VI) ion with low swelling and high adsorption performance
542. Synthesis and characterization of air-cure polyurethane bioadhesives basedon PEG and PCL
543. Cellulose Nanofibers/Covalent Organic Framworks Nanocomposites forElectrochemical Applications
544. Analysis of UV Absorption Behavior of Epoxy Acrylate Films ContainingCarbon Quantom Dot Nanoparticles
545. Enhanced Mechanical and Barrier Characteristics of LLDPE/TPS/OMMTPackaging Film Utilizing POE-g-IA or POE-g-MA
546. Studying the performance of bio-hydrogels in photothermal therapy(PTT)using melanin and magnetic nanoparticles(Fe۳O۴).
547. Investigating effective factors on tacticity of poly(methyl methacrylate)synthesized by free-radical polymerization
548. Examining the curing conditions of polyurethane adhesives modified with oftwo types aminosilane
549. The Use of Paper Manufacturing Black Liquor in Preparing Carbon Blackas a Polymer Reinforcement Agent
550. Fabrication of Open-cell Porous PLA Foams via CaCO۳ Leaching Method
551. Estimation of Interphase Affinity of Doped Polyaniline Nanorods to Localizein Hard Domains of TPU/PANI-ES Blend
552. The effect of flexible chain segment of hardener on stress relaxation,mechanical properties and self-healing of a dynamic epoxy network
553. Synthesis of carboxymethyl chitosan sulfate microparticles
554. Enhancement of antifouling properties of PLA membranes by incorporatingconductive montmorillonite/ polypyrrole nanocomposite
555. Spinning of Liquid Crystalline Graphene Oxide Suspension:Process Optimization through Shear Rheology Behavior
556. Effect of Polytetrahydrofuran on the Mechanical Properties of HTPB-basedPolyurethanes
557. Effect of Polytetrahydrofuran on the Rheological Properties of HTPB-basedPolyurethanes
558. Rheology and mechanical properties of compatibilized poly(lacticacid)/recycled ethylene vinyl acetate copolymer blend
559. Effect of Alkyl Chain Length on the Surface Properties of HydrophobicSilane-based Coatings
560. Investigation of mechanical properties of coumarin-based light-responsivethermoset polyurethane
561. Investigating the water absorption of polyurethane elastomers modified withnanoparticles
562. Synthesis of PLGA-Curcumin Nanoparticles via Nanoprecipitation Methodfor Targeted Drug Delivery Systems
563. Synthesis of Ampholytic Gel Polymer Electrolytes for Li-ion Batteries
564. Mesoporous Silica Coated Polydopamine Functionalized PolyphenolicNanosheet for Synergistic Chemo-Photothermal Therapy
565. Engineering Natural Matrices with Polyphenolic ۲D Nanomaterial toGenerate Multi-functional Therapeutic Bionanocomposite Hydrogels
566. Environmentally Friendly Pulping and Compatibilization Strategies forImproved Performance of All-green PLA/Agricultural Waste Biocomposites
567. Enhancement of Photovoltaic Performance and Light Harvesting inP۳HT:PC۷۱BM:Graphene Quantum Dot:N۷۱۹ Dye Quaternary PolymerSolar Cells
568. pH-Sensitive biosystem based on laponite RD/chitosan/polyvinyl alcoholhydrogels for controlled delivery of curcumin to breast cancer cells
569. Synthesis, characterization and in vitro bioactivity investigation of threecomponentbioactive glass ۵۸S
570. Antibacterial wound dressing study based on poly(vinyl alcohol)/ZnO
571. Antibacterial wound dressing study based on poly(vinyl alcohol)/AgNO۳
572. Self-healing Hydrogel Fabrication with Antibacterial Activity using Host-Guest Interactions between Dopamine-modified Alginate and β-Cyclodextrin Dimer
573. Improving the Thermal Resistance and Longevity of Epoxy Film Adhesivesthrough UiO-۶۶ and UiO-۶۶-NH۲ Composites: An Investigation into Kinetics
574. Chemo-Phototherapy of Breast Cancer Cells by In situ GrownPolydopamine Nanoparticles in Alginate Hydrogels
575. Utilization of Poly(vinyl ethyl imidazolium dicyanamide) (P[ViEtIm]C(CN)۲)as a solid electrolyte in calcium ion batteries
576. Fabrication and Characterization of Flexible Electrode based on Paper Pulpand Reduced Graphene Oxide
577. Novel poly(amide-sulfone)-based TFC membranes for improveddesalination performance
578. Sunlight Driven Multi-Color Switchable Latex for Temporary Data Displayand Photochromic Fabric Based on a Novel Bicyclic Aziridine Compound
579. Optimum concentration of chain-breaking antioxidant to improve thermalstability of ether-based TPU
580. Optimizing Of Enhanced Oil Recovery Operarion: Evaluating ThixotropicBehavior and Thermal Stability of D۱۱۸ SuperPusher Polymer Solutions
581. The Effect of POSS Nanoparticle Additive on the Rheological Behavior ofPVC Plastisol
582. Thin Flexible PVDF/ZnO Nanofibers as a Piezoelectric Sensor
583. Comparison of using DHBP and TMCH peroxides on the mechanicalproperties of PP/POE thermoplastic vulcanizates prepared by reactiveextrusion
584. Numerical Investigation of Projectile Shape Effects on the Low-VelocityImpact Response of Polypropylene Sheets
585. A novel strategy for improving the grafting degree of maleic anhydride ontohigh density polyethylene by using compatibilizer
586. PVC/PVA:SBA-۱۵-NH۲ Thin Film Nanocomposite membranes for EfficientWastewater Treatment
587. Investigating a Novel EVA/POE/LDPE Foam Compound with Nano ZnOfor Antibacterial Yoga Mat Applications
588. Effect of Electron Beam Irradiation on Physical and Mechanical Propertiesof Bakelite Valves
589. Preparation of functionalized graphene oxide and graphite as a highperformance additive in heavy metal adsorbent polymers
590. Preparation of SBA-۱۵ Supported Co(acac)۲ Catalyst for the ControlledRadical Polymerization of Vinyl acetate
591. Adsorption of Co(acac)۲ catalyst on the mesoporous MCM-۴۱ particles forthe cobalt-mediated radical polymerization of vinyl acetate
592. Synthesis and Development of a Novel Ziegler-Natta Catalyst for SlurryPolymerization of Ethylene-۱-Butene Copolymers
593. Synthesis of nanocellulose and fabrication of nanocellulose-chitosannanocomposite and investigation of its strength properties
594. Investigating changes in glass transition temperature and viscosity in epoxyacrylate resin reinforced with fumed silica
595. Effect of diethylenetriamine on yellowing of UV cured epoxy acrylate resin
596. Preparation and application of low molecular weight polyacrylate dispersantof Kaolin, calcium carbonate and TiO۲
597. Chemical-Based Prediction of the Glass Transition Temperature ofPolymers using Machine Learning Approach
598. Synthesise and Performance Evaluation of Adaptable Phase ChangeMaterials Based on Paraffin Wax/Silicone Rubber
599. Influence the effect of Aluminum Nitride on immiscible polyamide۶(PA۶)/polyolefin elastomer (POE) blend morphology and heat conductionproperties
600. Effect of amyl acetate ester on the performance of PEBA membranes forCO۲ separation
601. Effect of carboxylic groups on facilitated transport mechanism in PEBAcomposite membranes for CO۲ separation: A molecular simulation study
602. Designing a dual-functional Epoxy anti-corrosion Coating using DopamineLoaded Zeolitic imidazolate framework-۶۷ Decorated Layered TransitionMetal Carbides/nitrides
603. Investigation of the physical properties of shape memory polyurethanebased on PEG with different molecular weights
604. Synthesis of phenolic/vinyl acetate aergel system for thermalsupper insulator applications
605. Performance Evaluation of Thermal Energy Storage of Phase ChangeMaterials Based on EPDM/Paraffin Wax
606. Design and synthesis of polyuethane membranes with different hard to softsegment ratio
607. Grafing polymerization of styrene on SiO۲ nanoparticle to inducehydrophobic surface
608. Utilizing the SSA technique for assessing the quality of SCB distribution inLLDPE
609. Synthesis of organic-inorganic hybrid nanoparticles SiO۲-poly(methylmethacrylate-co- sulfonate styrene) by in-situ radical polymerization
610. Synthesis of hybrid nanoparticles based on a novel ionic liquids
611. Investigation the Effect of Hard Segment Microstructure on theElectrochemical Performance of Polymer Electrolytes Based on Self-HealingPolyurethane in Lithium-Ion Battery
612. A Molecular Dynamics Simulation Study on Drug-Loaded Thermo-Responsive Micelles Based on PNIPAAM-b-PLA Copolymers ThroughMicrofludic and Bulk Methods
613. Fish collagen–polyurethane Hydrogel for tetracycline (TC) adsorptionapplication
614. Tracing Ziegler catalyst performance through their structural charactristics
615. Comparison of functional properties of three different types of TPVs forlong-term application
616. Peroxide dynamically vulcanized high molecular weight hydrogenatedstyrenics block copolymer (SEBS)/polypropylene based TPV by one-stepand second-step processes via reactive extrusion
617. Innovative Road Markings Paint with Alkyd Resins Derived from Hemp Oil
618. The Effect of Solvent on the Synthesis of α, ω-Functionalized Poly(ethyleneglycol) Macroinitiator
619. Comparison of co-agents in peroxide-cured of thermoplastic vulcanized(TPV)
620. Sulfonated Hydroxyquinoline/Zinc- Doped Polyaniline: A FormidableAnticorrosion and Self-Healing Nanopigment
621. Investigation of oxidized regenerated cellulose as a blood clot agent
622. Utilization of PVC-Cu/Al۲O۳ nanocomposite membranes for removing ofhumic acid from wastewater
623. Synthesis and Characterization of Highly Featured CarboxymethylCellulose Depending on Reactants Concentration
624. Novel surface crosslinker for superabsorbent polymers based on Schiff base reaction
625. New co-solvent by natural deep solvent to fabrication high- foulingresistance reverse osmosis
626. Synthesis of Thermoplastic elastomer polyurea/urethane and investigation ofits mechanical properties
627. A simulation study on drug delivery system based on stimuli-responsivelinear copolymer nanoparticles containing drug: Effect of molecular weighton drug release behavior and diffusion coefficient
628. Synthesis of of blocked waterborne Acrylic-Urethane resin and investigationthe effect of crosslinking on hardness and adhesion in furnace primers
629. Unveiling the Hidden Potential: Transesterification Effect on Structure andProperties of Biodegradable PBS/PBAT Blends
630. Calculation of the Glass Transition Temperature of Plasticized Poly(vinylchloride) using Molecular Dynamic Method
631. Synthesis of Shape Memory Polyurethanes with Pendant AzobenzeneGroups and Evaluation of Their Mechanical Properties
632. Investigating the Impact of Novel Hydrogel Graphene Quantum Dots on theSynthesis of Chitosan/Gamma Alumina for Potential Biological Systems
633. Novel Hydrogel Chitosan / Gamma Alumina/ Carbon Quantum Dots forBiological System
634. Thermophysical behavior and performance evaluation of epoxy-basedpolymer containing GFRPComposite
635. Surface Modified Halloysite Nanotubes: A Promising Drug Delivery Carrierfor Cancer Therapy
636. Comparison of Machine Learning Approaches for Prediction of the GlassTransition Temperature of Polymers based on a Chemical model
637. Process for preventing gel formation during polymerization of cis-۱, ۴-polybutadiene
638. Dual-Stimuli-Responsive Rhodamine B derivative Molecular Switch for theDesign of Electrochromic Materials
639. PBR Nanocomposites R einforced by Graphene Nanosheets:Investigation of Cure and Mechanical Properties
640. The effect of ESO presence on the mechanical properties, toughness andstress relaxation of a three-dimensional dynamic epoxy network
641. Application of Chitosan-Pluronic Hydrogel Scaffolds for Skin TissueEngineering
642. Investigation of irradiated carbon blocks effect on the wear resistance ofrubber
643. Enzymatically-gellable modified starch-gelatin hydrogels for tissueengineering applications
644. Upcycling waste polycarbonate via blending with ABS: a sustainablesolution
645. Investigating Solubility Parameters of Polyurethane Soft Segments throughMolecular Dynamics Simulations
646. Synthesis of Shape Memory Polyurethanes Containig Azobenzene Groups asChain Extender in Backbone and Their Mechanical Properties
647. Evaluation of coagulation behavior of methylated collagen as an potentialcollagen-based hemostate
648. The Effects of Chemical Modification of Fe۳O۴ MNPs with PCL Chains onMechanical Properties of Polyurethane Magnetic Nanocomposites
649. Design and fabrication of thermochromic and fluorscent smart paper fordevelopment of anticounterfeiting labels
650. Preparation of photodegradable polymer fibers
651. Development of a Milk Spoilage Indicator
652. Synthesis of polyepichlorohydrin via cationic ring opening polymerization
653. Friction Reduction by Grafting PHEMA onto Fe۳O۴-PDMS Nanocomposite
654. Improving the responsiveness of poly(N-isopropylacrylamide) and poly(methylmethacrylate) films via ultraviolet/ozone irradiation
655. Simultaneously Improvement of Water Flux and Salt Rejection of GrapheneOxide-based Membranes Prepared by Pressure-Assisted Self-AssemblyTechnique
656. Investigating the corrosion resistance properties of silica nanoparticles
657. Numerical study of Maddock mixer
658. Elution Properties and Antibacterial Activity of Vancomycin- LoadedAcrylic Bone Cements
659. Influence of Vancomycin Contents on Handling Properties of Acrylic BoneCements