انتشار مقالات نهمین کنفرانس بین المللی مواد کامپوزیتی: ساخت، خواص و کاربرد

1. Investigation detachment of ۲۰۲۴-T۳ Aluminum Alloy plates bonded by cohesive elements and cohesive surfaces

2. Core-shell CoFe۲O۴-ZnO nanocomposite for electromagnetic wave absorption application

3. The influence of tin addition on the microstructure and properties of ZrO۲-Al۲O۳ reinforced aluminum composites

4. Mechanical properties of epoxy-based nanocomposite reinforced with Al۲O۳ nanorods

5. Experimental Study of Tensile Properties of ۳D-Printed Titanium-Reinforced ABS

6. A New Mixed Mode I/II Fracture Criterion for Arbitrary Cracks in Orthotropic Materials Considering Fracture Process Zone Effects

7. Tailored Plasmonic Microspheres: Fabrication, Characterization and Harvesting Visible Light for Photocatalytic Removal of Organic Pollutants

8. Next-Generation of Photocatalytic Antibacterial Nanocomposite: Cutting-Edge Strategy for Effective Inactivation of Pathogenic Bacteria

9. Production of Ultra-pure Lithium Hydroxide, A Widely Used Material in The Production of Lithium-ion Batteries, Lithium Composites and Completing the Chain of Lithium Compounds from Its Halide Salt by Membrane Electrolysis method

10. Investigating the orientation of short carbon fibers on the surface hydrophobicity by using flocking electrostatic method

11. Chemi-resistive Behavior of Polyaniline/anatase TiO۲ Nanocomposite: Application in Sensing Devices

12. Corrosion Behavior of Nano- and Micro-Composite Materials

13. Investigating the microstructure and hardness coating of HA on Mg-Zn alloy by sol-gel method

14. Effects of aging on compressive properties of a multilayered hybrid cored-sandwich panel stiffened by composite grid structure

15. Comparative study of the flexural properties of fiber-metal laminates subjected to extreme freeze-thaw cycles

16. Simulation of layup effects on the residual stresses of layered composite structures caused by the curing process

17. Nonlinear Vibration Analysis of Simply Supported Euler-Bernoulli FGM beam under forced excitation

18. A Numerical Investigation into the Crashworthiness of Bio-Inspired Aluminum/CFRP Tubes Under Lateral Loading

19. Bio-Inspired Hybrid Energy Absorbers: Enhancing Crashworthi-ness and Weight Efficiency in Vehicles

20. An experimental study on fracture assessment of rigid nanocomposite foams weakened by a crack

21. Synthesis and characterization of spinel-based catalyst for sonocatalytic removal of ciprofloxacin antibiotics

22. Effect of aluminum hydroxide/epoxy coating on the flammability indexes of cotton/epoxy laminated composites

23. Environmentally-Friendly Strategies for Tailoring Interfacial Adhesion and Performance of All-green Biocomposites Based on Thermoplastic Starch/Kenaf Fiber

24. Extrusion Foaming of Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) in the Presence of Spherical Nanosilica and Reactive Compatibilizer

25. Enhancing Polyamide ۶ and ۶.۶ Properties with Nanofillers: A Study on Graphene, CNTs, Carbon Fibers, and Titanium Dioxide- Short Review

26. Sonochemical Synthesis of Copper Ferrite-Chitosan Nanocomposites for Electrochemical Sensing and Biomedical Applications – Short Review

27. Synthesis of Cellulose Hydrogels for Drug Delivery Applications: Short Review

28. Enhancing ۳D Printed PLA Filaments with Nanoclay: Impact on Thermal Stability and Mechanical Performance

29. Nanoclay-Reinforced PLA/TPU Blends: A Study on Mechanical, Thermal, and Morphological Improvements- Short Review

30. Modeling the impact of flame retardants on burning behavior of ۳d printed polymer chair

31. Analysis of delamination propagation in open-hole GFRP composite under ۳ point-bending fatigue loading

32. A magnetic nanocomposite based on graphene oxide nanosheets and Zn-Fe layered double hydroxide as a highly efficient adsorbent for the removal of dye from aqueous environment

33. Melting of Holey Boron - Nitride nanosheet using molecular dy-namics simulation

34. Development of Lightweight PP/Talc Composites Reinforced with Hollow Glass Microspheres

35. Preparation and properties of biodegradable PBAT/CaCO۳ composite modified with chain extender

36. Extruded Poly(lactic acid)/Nanoclay Films Toughened with Ethylene-Vinyl Acetate Copolymer: Effects of Nanoclay Type and loading on Film Properties

37. Polymorphism-Driven Performance Enhancement in Lightweight Polypropylene Composites

38. Green Bead Foams of Poly(lactic acid) in Thermoplastic Starch Matrix Reinforced with Expanded Graphite

39. Improved mechanical properties of epoxy composite via modified and functionalized Short Carbon Fibers by LT۵۶۰

40. Optimization of Antisymmetric Angle-ply composite laminates under transvers and thermal loads

41. Study of corrosion rate of Co-CeO۲ composite for SOFC interconnect application

42. Decrese of Cr۲O۳ growth at presence of Co-La۲O۳ composite coating

43. Effect of Co-Y۲O۳ composite coating on oxidation activation energy of AISI ۴۳۰ steel

44. Investigation of flexural modulus of cyanate ester/carbon fiber composite at high temperature

45. Effect of PCA addition on the hardness and shear strength of A۰.۲۵CoCuMnNi high entropy alloy

46. Feasibility of the Manufacturing Process of Joint Stabilizers Using ۳D Printing

47. Thermo-mechanical properties of carbon/phthalonitrile composite at high temperatures

48. Effect of loading rate on the intralaminar fracture toughness of glass/epoxy laminated composites

49. Investigation of Interphase Cohesive Properties in Single-Fiber Glass/Epoxy Composite Using Tensile Test and FEM

50. Investigating the effect of interphase region on the elastic modulus of metal/graphene nanocomposites

51. Prediction of elastic modulus of polymer/carbon nanotube nanocomposites by mean field method

52. Plant-Based Biocomposites of Poly (lactic acid)/Rice Straw/Soybean Oil: Effect of Eco-friendly Boric Acid Pulping and Compatibilization on Properties

53. Investigation of the Effect of TiO۲ NPs and PEG on the Performance of PAN Nanocomposite Ultrafiltration Membranes

54. Cyclodextrin-Metal–Organic Framework (CD-MOF) as efficient carrier for sustained drug delivery

55. Low-energy impact response of rubberized cork sandwich structures with glass face sheets

56. The Experimental Investigation of Low-Velocity Impact on Sandwich Structures with a Cork Core and Basalt Face Sheets

57. Low Velocity Impact Behaviour of Glass- and Basalt-Reinforced Vinyl Ester Composites

58. Comparison of buckling capacity in CFRP composite plate and Hemp-Epoxy composite plate

59. Estimation of burst pressure of type IV composite pressure vessels using various damage criteria for different composite layup

60. Development of MXene/PEDOT:PSS nanocomposite for electrochemical applications

61. Mixed-Mode (I/II) Fracture of Glass/PA۶ Thermoplastic Composites Using Image Based Correlation Methods

62. Effect of sintering temperature on the microstructure and hardness of Al ۶۰۶۱ matrix composites reinforced with ۵vol.% of AlFeCuCrNi high-entropy alloy

63. Effect of stainless steel ۳۰۹ (SS) reinforcing particles addition on the microstructure, porosity and hardness of Al ۶۰۶۱/SS composites

64. Using Nanocomposites in the Heat Transfer System of Li-ion Battery Packs of Electric Vehicles

65. Design of glass/epoxy composite stacking using machine learning algorithms

66. Morphological Evaluation of Conductive Polymer Blends by EIS measurements

67. Defects detection in PTFE using VMD analysis and Infrared Thermography

68. Nondestructive Testing of PCTFE panels using Infrared Thermographic Signal Reconstruction and image processing

69. Bio-composites of Polylactic acid/Polyethylene glycol/ Cellulose Nanocrystals for Drug Release Applications

70. Adsorption of Methyl Orange from Aqueous Solution Using Polypyrrole/Andalusite Nanocomposite

71. Adsorption of Crystal Violet Dye from Aqueous Medium Using Alginate/Acrylamide/Graphene Oxide Composite Hydrogel

72. Optimization of the laminated composite beam with box section under pure shear load

73. Surface entrapment of hydroxyapatite on ۳D printed polylactic acid interference screws for biomedical application

74. Examining Internal Defects in ۳D FML Composites with Cork Core Using Active Thermography

75. Rheology and Viscoelastic Behavior of MWCNT-Reinforced EPDM/SBR Nanocomposites

76. Investigating joint failure mechanisms in continuous ultrasonic welding of GF/PA۶ thermoplastic composites

77. Investigation of the effect of using an energy director on the quality of static ultrasonic welding of CF/PA۶ thermoplastic composite

78. Tensile Properties of Vacuum Infusion and Hand Lay-Up Processed Glass Reinforced Composites

79. Design and stress analysis of the protective rod of a rail-car bogie bolster made of hybrid metal and carbon/epoxy composites under low-velocity impact

80. Numerical Strength Analysis of Fall Protection Loads on the ۲.۵ MW MAPNA Wind Turbine Nacelle Cover

81. Advanced plant-derived wound dressing with enhanced healing properties

82. Development of a honey-based bilayer wound dressing: a novel strategy for effective wound recovery

83. Novel Experimental Approach to Enhancing the Tensile Properties of GFRP Laminates through Steel Wire Reinforcement

84. Comparative Experimental Study of Open Hole GFRP and Aluminum Plates under Tensile Loading

85. Effect of carbon and boron addition on physical and mechanical properties of aluminum metal matrix composite, a simulation study

86. A novel Taguchi-based tabular neural network (TabNet) model for elastic anisotropic short fiber reinforced composites

87. Addition of Graphene Content on Silicone-Epoxy Nanocomposite: Hydrophobicity, Adhesion, and Hardness

88. Experimental Study on Foam Density Influence in ۳D-Printed Foam-Filled Sandwich Beams Under Flexural Loading

89. Study on The Prevention of Laminated UPVC Profiles from Deformation by Simultaneous Decrease in Heat Buildup (HBU) and Enhancement of Their Heat Deflection Temperature (HDT)

90. A novel polymeric nanocomposite based on MXene toward EMI shielding material: a Review paper

91. An Ablative EPDM based nanocomposites : A Review Paper

92. MXene based polymeric nanocomposites as Promising Dielectriec material: A Review Paper

93. Investigating the impact of different boundary conditions on the dynamic behavior of a composite panel

94. A case study for mechanical behavior of lattice reinforced cementitious composites under uniaxial compression

95. Numerical Simulation of Cone-Jet Formation for processing pol-ymeric particles using Electrohydrodynamic Atomization tech-nique

96. Fabrication of Nanocomposites Based on PANI and P۳HT by Crystallization

97. Application of Carbon-based Nanocomposites for Stability Enhancement of Polymer Solar Cells

98. Investigation of the effect of shape memory alloys on Pressure capacity of polymer composite Pipes

99. Experimental Comparison of Damage in Fiber-Metal Laminates with Different Layer Arrangements Subject to Static Loading

100. A numerical investigation of Newtonian and non-Newtonian fluid-filled nested hyperelastic structures under low-velocity impact loading

101. Design and fabrication of a flexible battery fatigue tester to investigate the effect of geometrical parameters on electrochemical performance

102. An analytical investigation on lithium-ion battery electrode electrical conductivity using micromechanics

103. Comparative analysis of re-entrant honeycomb and star-shaped auxetic meta-structures: energy absorption and Poisson's ratio performance

104. Stress Analysis of Coated Thin Foils in Flexible Batteries under Static Bending Load: A Finite Element Approach

105. Influence of Printing Parameters on ۴D-Printed Samples

106. Improving lightning strike protection by through-thickness direction fibers in ۳D CFRP composites using woven carbon fibers and nanoparticles

107. Detection of Transverse Cracking Damage in GFRP by Acoustic Emission and Digital Image Correlation Techniques

108. Anisotropy of thin metal foils used in flexible electronics

109. Strain-based failure criteria utilizing the modified maximum strain

110. Effect of fabrication method on electromagnetic properties of nanocomposites based on MWCNTs for RCS reduction

111. Numerical study of low-velocity impact on GLARE laminates based on elasticity concepts

112. Evaluating Shape Memory Properties of Recycled PET and HDPE vs PET with Carbon Fibers

113. Statistical analysis of fatigue life of laminated composites using artificial intelligence

114. The effect of grid-box material on energy absorption of shear thickening fluid-filled hyperelastic structure: A numerical study

115. Mechanical characterization of thin-walled Al-honeycomb core sandwich structures reinforced thin-ply carbon-glass fiber facings

116. Quasi static indentation of fully polypropylene sandwich panel

117. The Impact of Projectile Velocity on the Ballistic Performance of Layered Composites Consisting of Aluminum, Glass Epoxy Composite, and Alumina-Reinforced Elastomer

118. Localized Impulsive Response of Aluminum Three-Layered Sandwich Cylinders with Auxetic Core

119. Parametric Stability of Fiber Metal Laminate Cylindrical Shells Under Harmonic Axial Loads

120. On the comparison between Selenium penetrating glue and composite patch for enhancing fracture resistance of aluminum alloy

121. Comparison of Different Fiber Distribution Models in Vibration of Functionally Graded Nanocomposite Cylindrical Shells

122. Vibration Analysis of Nanocomposite Cylindrical Shells Reinforced with Randomly Distributed Wavy Carbon Nanotubes

123. In-situ growth of binder-free copper-zinc oxide Nanocomposite to enhance supercapacitor electrode performance

124. A nature-inspired pattern for improvement in-plane compression of honeycomb structures

125. A chiral-based topology for improvement the mechanical properties of auxetic structures

126. Application of biodegradable polymeric composites in cartilage tissue regeneration using the electrospinning approach

127. Development of metal-based composites with anti-inflammatory properties for joint regeneration

128. Creep behavior of KER ۸۲۸ epoxy resin reinforced by MWCNT: experimental approach

129. Experimental Investigation of the Effect of Adding MWCNT on Crack Growth in Mode III Fracture of Adhesive Joints

130. Investigating the Fe-Cu-Ni composite formation using elemental powders

131. Thermodynamic Investigation of Possible Composite Compound formation from SiO۲-Al۲O۳ Reaction

132. Investigation of TiO۲-Al۲O۳ Composite, Applications, Thermodynamics, and Producible Compounds

133. An Experimental Investigation of the Creep Behavior of Single-Lap Adhesive Joints with PMMA Sheets

134. Numerical Investigation of Tensile Properties of GFRP Composites Reinforced with Stainless Steel Wires

135. Predicting Fatigue Behavior of Glass-Epoxy Composites with Initial Damage

136. Degradation and Biocorrosion of Composite Materials inBiomedical Implants: A Comprehensive Review of Mechanisms and Applications

137. Optimization and Simulation of Energy Absorption in Composite Propeller Under High Speed Impact

138. Analysis of Energy Absorption in Composite Sandwich Panels with Different Core Structures Under Impact Loading