انتشار مقالات هشتمین کنفرانس بین المللی مواد کامپوزیتی: ساخت، خواص و کاربرد

1. Prediction of damage in composite bolted joints under creep loading

2. Developing a micromechanical model to predict the elastic properties of plain weave composites

3. Influence of GNPs debonding on mode I fracture toughness of polymeric nanocomposites

4. Effect of woven fabrics harness on the dynamic tensile mechanical properties of woven fabric composites

5. Assessment of the effect of matrix cracking density in GFRPs on the time response of surface-mounted FBG sensors under Lamb wave propagation

6. On the optimum RVE size of the aligned-short fiber composites with random distribution

7. Theoretical prediction of equivalent stiffness of anode and cathode coatings in lithium-ion batteries

8. An overall Analysis of a Composite Sewer Manhole Cover

9. Investigation on the application of restrained recovery of prestrained SMA wires embedded in self-healing composites

10. Introduction and applications of shape memory alloy

11. Fatigue modeling of laminated composites using new strain-based failure criteria

12. Comparing UAV composite wing stress analysis with one-way and two-way coupled fluid-solid interaction methods

13. Modeling, analysis, and fabrication of a composite propeller of an ultralight aircraft

14. Residual strain measurement of polymeric composite materials using the FBG sensor

15. Detection of delamination damage in cross-ply laminated composites by wave propagation and machine learning, Numerical and experimental investigations

16. Analytical modeling of creep phenomenon of epoxy polymer reinforced with SMA

17. An investigation of the mechanical properties of synthetic leather made of PVC with organic and inorganic pigments

18. Simulation of solidification process of in-situ ۶۰۶۱ alloy metal matrix composite

19. Weld nugget zone composite of Al ۱۰۶۰-Copper subjected to uniaxial fatigue loading cycles

20. On the Mixed Mode I/II/III Translaminar Fracture Toughness of E-glass/Epoxy Laminated Composites

21. Effect of printing parameters on the tensile properties of ۳D-printed PLA material

22. Effect of short natural fibers length and weight fraction on the mode I fracture toughness of epoxy-based composites

23. Effect of Nano/Micro Reinforcement Type on Mechanical and Physical Response of Polyurethane based Micro-nanocomposites

24. Performance of rotary jet melt spun polypropylene fiber reinforced polyester composites

25. Investigating the effect of PVC and nanoclay on impact ability and mechanical properties of polyester nanocomposites

26. Modeling and analysis of thermoplastic composite pipe under tensile loading

27. CeO۲ nanocubes@TiO۲ core-shell nanocomposite: Synthesis, structural and morphological characterization

28. Influence of initial crack length on mode III delamination in composite materials by MSCB method

29. Fabrication and characterization of ZnO quantum dots heterojunction structures for photocatalytic treatment ofpharmaceutical wastewater

30. Finding transient angle in tension for unidirectional composites

31. Mass-specific flexural properties of a mycelium-based biocomposite

32. Effect of pre-pressure on compressive behavior of a natural biocomposite

33. Glass/Epoxy laminates with Novel Core Layers Under Quasi-Static Indentation: A Comparative Experimental and Numerical Study on Using Chopped Natural and Synthetic Fibers as a Core Layer

34. Damage Mechanism of Glass/Epoxy Laminates with a Novel Core Layer under Quasi-Static Indentation: A Comparative Study on Using Kenaf, Glass, and their Hybrids as Laminate Skins

35. Prediction of impact and fatigue life behavior of FML by finite element and mathematical simulation

36. Hydrothermal growth of CuCo۲O۴ spinel nanoparticles on TiO۲ nanosheets for photocatalytic degradation of tetracycline

37. The effect of different solvents on the dispersion quality of MWCNTFe۳O۴ hybrid nanofillers in nanocomposites

38. Experimental and numerical investigation of the strain energy release rate of composite adhesively bonded joints under mode II loading

39. An abaqus plugin for homogenization of woven composite fabric

40. An analytical solution for nonlinear static bending of a functionally graded Timoshenko beam

41. ۴D printing utilizing bending thermal deformation of ۳D printed PLA specimens

42. Effect of nozzle temperature on the mechanical properties of FDM ۳D-printed PLA materials

43. Prediction of mechanical properties of Al-C nanocomposite: a machine learning approach

44. A deep learning approach to estimate the contact force of a fiber metal laminate: a finite element analysis

45. Composite lithium-ion battery panels to be used as electric and hybrid car bodies

46. Numerical modeling for thermographic inspection of subsurface defects in fiber-reinforced polymer composites

47. The influence of annealing heat treatment on the interface evolution of Al ۱۰۵۰/Mg AZ۳۱B bilayer sheet

48. The Effect of Water Immersion Ageing on Low and High-Velocity Impact Behavior of Marine Sandwich Panels with Different Skins

49. Investigating the Effect of Fiber and Core Type on the Bending and Buckling Behavior of Bio-Based/Green Sandwich Structures

50. Investigating the Effect of Fabric Surface Texture in the Tensile Properties of Hemp/PLA Bio-Composites

51. Effect of sewing on the strength of foamy core composite sandwich panels

52. A magnetic nanocomposite based on gelatin-chitosan hydrogel containing Zinc chromite as a novel nanostructure for water treatment

53. Study of a composite thermal fin performance with uncertain parameters

54. Dielectric Characterization of Polymer Composite Materials for Antenna Radome Applications

55. Investigating the Biological Properties of Metal Nanocomposite Synthesized with Alhagi Plant extract

56. Iron and Magnesium Nanoparticles Adorned on Mesoporous Zeolites: Investigation of Nanocomposite Catalytic Properties

57. Study the effects of reinforcing elements on the flank wear when milling Al۵۲۰-MMC

58. An investigation into the fabrication of reinforced Al-MMC with the stir-casting process

59. Definition of Transition Time in Machining Titanium Metal Matrix Composites (Ti-MMCs)

60. A proposal for a composite hand cane using the analytical solution and numerical simulation of coaxial orthotropic cylinder

61. In-situ Synthesized nanocomposite Containing Copper/Silver Nanoparticles with Red Cabbage extract

62. Surface Functionalization of Di-Nuclear Schiff base with Ag and Ni Nanoparticles as a Novel Bio-nanocomposite

63. The effect of chitosan/silk film loaded with Anti-inflammatory, Antibiotic, and Angiogenic drugs in chronic wound healing

64. Investigating effect of nanofillers alignment on conductivity of polymer/CNT nanocomposites

65. Effects of Shot-peening on the mechanical properties of extruded Mg/۲.۵%HA biocomposite

66. Wear Behavior and Microstructure Characteristics of A۳۵۶/ZrO۲+Al۲O۳ Hybrid Composite

67. Effect of interlayer dry area extent and interlaminar delamination on the tensile strength of composite plates manufactured by vacuum infusionprocess

68. The effect of the presence of bubbles inside resin on the tensile strength of composites manufactured by vacuum infusion process

69. Magnetic gelatin-chitosan hydrogel incorporated with graphene oxide as an effective nanocomposite for methylene blue adsorption

70. Mechanical response of honeycomb and chiral metastructures under axial compression loading

71. Piezoelectric Effects of Bone Scaffolds of Poly (L-lactic Acid) and Gelatin with Carbon Nanotubes

72. Numerical permeability measurements of a woven fabric preform for different clear-fluid and porous medium interface conditions

73. Improvement of the electrochemical behavior of polymer electrolyte using covalent organic frameworks nanofiller

74. Evaluating the effect of standing waves on morphological properties of spinodal topologies

75. Investigation of thermal behavior of epoxy coatings containing surface-modified hollow glass microspheres

76. Toughened Biodegradable PLA: Comparison Between the Mechanical Performance of EPDM and PBR

77. Simulation of mixed-mode I/II delamination growth in laminated composites considering fracture process zone

78. Numerical analysis of face material effect on the bending behavior of honeycomb sandwich structure

79. Reuse of thermosetting polymer matrix composites reinforced with glass fibers as filler in epoxy flooring

80. The effect of water absorption on the shear properties of glass-Epoxy laminates include woven fabric with different areal density

81. Comparison of first-order and higher-order basic theories in calculating critical buckling load of marine sandwich panels

82. Numerical analysis of vibration behavior of sandwich composite structure with three different types of core

83. Developing an Empirical Model for Predicting Short Fibers Alignment Angle

84. Fabrication of metal matrix composite on A۵۱۶ steel and investigation the effect of powder composition on microhardness

85. Effect of Friction stir process (FSP) and surface compositing on tribological properties of pure copper

86. Analysis and optimization of stacking sequence of thin-walled composite pressure vessel using finite element