انتشار مقالات هفتمین کنفرانس بین المللی مواد کامپوزیتی: ساخت، خواص و کاربرد

1. The sintering study of stainless steel ۳۱۶ metal injection molding for high density application purpose

2. Composite coating of HA-CNTs-Gelatin on Mg alloy as a potential bone implant: Microstructure evaluation

3. The optimum weight percentage of the nanoparticles composition to prevent surface cracks in nanocomposite with the base of silicone rubbers

4. Fatigue life prediction of off-axis unidirectional composites based on the damage-entropy model

5. A brief introduction to the auxetic materials

6. Detection of matrix cracking in composites using Lamb wave propagation and machine learning: numerical modelling and experimental validation

7. An experimental study on self-temperature rise phenomenon in polymeric laminated composites during fatigue loading

8. Numerical Analysis of the Deformation Behavior of Auxetic Metamaterials plate

9. Study of Auxetic Materials Behavior by Experimental Methods

10. Microstructure and Mechanical Properties of St-MMA Copolymer/Silica Nanocomposite Foams Prepared Using a High Pressure Supercritical CO۲ System

11. Chemical characteristics and mechanical properties of thermoplastic polyurethane nanocomposites containing organoclay and POSS nanoparticles

12. Effects of different porosity volume fractions on the mechanical properties and global orthotropic behavior of gelatin closed-cell bio-foams

13. Fouling mechanism of PVC/Al۲O۳ nanocomposite membrane in the filtration of humic acid with and without PAC coagulant

14. Effect of coagulation treatment on the antifouling properties of PVC/Al۲O۳ nanocomposite membrane for water treatment

15. Improved Mechanical and Biological Properties of Biodegradable Composites Based on Bioactive Glass and Tragacanth

16. Determination of a β- blocker by a simple modified electrochemical sensor

17. Study of the influence of non-symmetric geometry of convex curved ENF specimen on delamination of a composite material in mode II

18. Synthesis and Properties Comparing of the TiO۲ doped with CNT and Ag nanoparticles

19. Evaluation of the Effect of Polypropylene Synthetic Fibers on Thickness Design of Cement Concrete Composite Runway Considering Effective Flexural Strength and ۳D Finite Element Analysis

20. The bubble nucleation and growth of supercritical CO۲ in Polymethylmethacrylate (PMMA) via visual observation apparatus

21. Retrofit Wall Insulation: Investigating the role of water-repellent Rockwool in improving the energy performance of Veneer brick walls

22. Development of a finite element model to study the impact behavior of nano-reinforced sandwich structures

23. Mechanical Properties of PP/PE/Clay Nanocomposites

24. Green synthesis and characterization Fe-Ni bimetallic nanocomposite using natural plant

25. Ultrasonic assisted fabrication and characterization of CuO/ Fe۲O۳ bio-nanocomposite using Quinoa plant

26. Fracture Mode of Opening for Annular Crack in Anisotropic Composites

27. Stress Based Criteria for Mixed Mode (I/II) Fracture of Composites: Micro Modeling Assessment

28. The impact of wrinkle behaviour on the Poisson’s ratio of woven composites: Geometrical study

29. Fabrication and Effective Factors Investigation in Nano porous Alumina (AAO) template Synthesis

30. Damage Analysis of Pultruded Fiber Reinforced Polymer Connections

31. Computational Study for Delamination Detection in Fiber-Metal Laminates Using Lamb Wave Propagation

32. Investigation the Creep Behavior Affected by FGM Constant in Pressure Vessels under Thermo-Mechanical Loads

33. Buckling and Post-Buckling Behavior of Tubular Columns Made of Shape Memory Alloys

34. Processing of High Ratio Wood Plastic Composites (WPC)from Recycled Polyethylene using Calendering Machine

35. Study of Mechanical Performance of Carbon Black Reinforced Thermosetting Nanocomposites

36. Mechanical Properties of Hollow Glass Microspheres (HGMS) Reinforced Polystyrene Based Thermosetting Micro-composites

37. Characterization of Poly Lactic Acid (PLA)/Poly Caprolactone (PCL)/Thermoplastic Polyurethane (TPU) Shape Memory Alloys Processed by Two Roller Calendering

38. Mixed-mode I/II fracture criterion for crack growth behavior of orthotropic materials

39. The Effect of Geometrical Parameters on the Impact Strength of Steel Wire Reinforced Sandwich Structures

40. Experimental Investigation of the Cooling Rate Effect on Final Shape of Asymmetric Composite Laminates

41. A novel synthesis of magnetic anatase TiO۲ loaded by graphene quantum dots with improved the application in methylene blue degradation

42. Novel and facile graphene quantum dots based on maltose: synthesis, characterization and application

43. Diminishing of the Electroendosmosis Flow in Gel Electromembrane Extraction for Quantification of Chromium Species in Environmental Samples

44. Parallel separation and quantification of acidic and basic dye specimens via a dual gel electro-membrane extraction from real environmental samples

45. Weld Nugget Zone Nanocomposite Formation of Al ۷۰۷۵-T۶/Al۲O۳ over Friction Stir Spot Welding Process and its Influence on Fatigue Response

46. Analytical, Numerical, and Experimental Study of the Flatwise Compression Properties of ۳D Integrated Woven Sandwich Composites

47. Application of polypyrrole/hydroxyapatite bilayer coatings on stainless steel (۳۱۶L) using electrodeposition method

48. Role of Interphase Region on Electrical Conductivity of Polymer Nanocomposites

49. Post-Buckling analysis of cracked axially functionally graded beams under compressive uniaxial load

50. Effect of Al۲O۳ content on mechanical properties of Al/Al۲O۳ functionally graded composite materials fabricated by powder metallurgy

51. Preparation of Novel Thermoplastic Polyurethane Elastomers (TPU)/Terpolyamide Poly-Blends as a Composite Matrix

52. Oxidation behavior of ZrC-SiC-HfB۲ composite under an oxyacetylene flame

53. Simulation of healing process in bio-composites: a case study of human skin

54. Improved Aromatic-Hydrocarbon Liquid Permeability of Thermoplastic Polyurethane/Closite-۳۰B Nanocomposites through Preferential Clay Intercalation Behavior

55. Thermal behavior of a Hollow Glass Microspheres Composite Coating

56. Long-term creep behavior prediction of composite pipes subjected to humid environments

57. Effect of reinforcement content on the properties of Ni-Fe/Al۲O۳-TiO۲ hybrid composite coatings

58. The influence of sintering temperature on the characteristics of the Cu-xAl۲O۳ composites

59. Facile synthesis of CuFe۲O۴/Sep as a new nanophotocatalyst and its application in dye degradation

60. Investigating the Application of ۳D Printers in the Manufacture of Reinforced Composites

61. Evaluation of Mechanical and Physical Properties of Luffa Cylindrica Reinforced Bio-composites

62. Characterization of Biodegradable Thermoplastic Starch/Poly LacticAcid/NanoClay Filaments Used in ۳D Printing

63. Conductive Inks: History and Future Prospects

64. Conductive Inks Based on Metallic Silver Nanoparticles with Enhanced Properties

65. Effect of cell structure on Solvent Absorption Capacity of Nitril rubber composite foams

66. Micromechanical modeling of textile-reinforced mortars under uniaxial tensile loading

67. Investigation of the effect of clamping force on the strength and failure of composite laminate bolted joints under dynamic loading

68. Poly(amidoamine) dendrimer-grafted carbon nanotube and polyurethane composites

69. Synthesis of Graphene nanoribbon- CdSe@CdS Quantum Dots Nanocomposite to Boost the Photocatalysis Performance for Hydrogen Generation

70. Magnetically Decorated Halloysite Nanotubes: The Halloysite Mass Content Assessment in Nanocomposite

71. Novel Magnetic Halloysite based-Molecularly Imprinted Polymer for Sunset Yellow Removal from Aqueous Solutions

72. CST modeling of Multilayer Polymeric Composites for Designing of Electromagnetic Absorber

73. The influence of inorganic Nano fillers on the mechanical properties and diffusion ratio of Ethylene propylene diene monomer

74. Synthesis and characterization of clay/chitosan incorporated cellulose/ NiO based on biorenewable resources for methanol oxidation

75. Biocomposites based on poly (lactic acid), chitosan and their blends used for food packaging films

76. Preparation and Characterization of Magnetoconductive Composite Scaffold for Neural Tissue Engineering

77. Modeling matrix cracking evolution in cross-ply laminated composites subjected to in-plane hygrothermal stresses

78. Determining the effect of graphene oxide on diameter distribution of PVP electrospun nanofibers

79. Effects of Alkyl Ammonium Chains on Thermomechanical Properties of MMT/Polypropylene Nanocomposite-MDS Simulation

80. Recycling of mixed plastic wastes containing PVC

81. Preparation of Novel Composite as Lubricant Additive for Tribological Properties

82. Preparation of random and graft copolymers of GMA and MMA using reactive melt mixing and solution polymerization

83. Improvement of rheological and mechanical properties of PLA by reactive blending with Poly(MMA-g-GMA)

84. Nanocomposites of Graphene Nanosheets Grafted with poly(۳-hexylthiophene) Chains and P۳HT Homopolymer as Well as Hydrophobic P۳HT-b-polystyrene Block Copolymers

85. Scaffolds Prepared by Nanocomposites of Polyaniline and Poly(۲-hydroxy ethyl methacrylate)-co-Poly(Nisopropylacrylamide)- co-Poly(ε-caprolactone) Terpolymers

86. Novel Nanocomposites of Various Grafted Graphenes and Poly(۳-hexylthiophene)

87. A Study on Fabrication of Hybrid Composite Based on Reduced Graphene Oxide and Polyaniline for Corrosion Protection

88. Effect of Carbon Black and Silica Fume on Mechanical and Thermal Properties of High-density Polyethylene Films Used for Water Transport Pipes

89. Super toughening of PLA through blending with SEBS and Nano-clay

90. Preparation and Characterization of Extrusion Injection Molded Bio-based Polylactic Acid (PLA)/Thermoplastic Polyurethane (TPU)/Ethylene Vinyl Acetate (EVA) Polymer Blends

91. Halloysite, a Dual Charge Nanotube, Effect on Polypropylene Nanocomposites Preparation via In situ Polymerization using Ziegler-Natta Catalyst

92. Effect of Chemical Structure of Epoxy Resin on Mechanical Properties of Cured Resin and its Composite

93. Study of Composites of Chitosan and its Significant Applications - A Review

94. Investigation mechanical properties and Interlaminar shear strength of epoxy / glass prepreg based on bi-component epoxy resins

95. Poly (Methyl methacrylate) /Poly (lactic acid) /Cellulose Nanocrystals Packaging Film. Part I: CNC Surface Modification, Nanocomposite Preparation and Characterization

96. On the wear behavior of nano-CaCO۳/E-glass fiber/epoxy composite

97. An experimental study on the effects of various drill types on drilling performance of UD and woven flax fiber reinforced composites

98. Elasto-plastic simulation of bullet penetration into Al۷۰۷۵-SiCp composites armor

99. Production of new generation Thermoplastic elastomer polyurethane (Rubber Imitation) by in-situ reaction molding

100. Theory of interaction of EM waves from Characterization of Biodegradable Thermoplastic Starch/Poly LacticAcid/NanoClay Filaments Used in ۳D Printing