A NOVEL METHOD FOR NONLINEAR DYNAMIC ANALYSIS OF BEAM-COLUMN STEEL MEMBERS

سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,001

فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICCT03_023

تاریخ نمایه سازی: 5 تیر 1389

چکیده مقاله:

Evaluation and subsequent strengthening of new and existing structures for extreme loading cases, such as explosion, blast, earthquake or fire, require a realistic and pragmatic design approach to be formulated and for which there is a significant dearth of scientific data in the literature. This paper addresses, in generic form, an innovative nondiscretisation semi-analytical mechanical-based formulation for the nonlinear dynamic response of an isolated beamcolumn steel element, which importantly incorporates the second order effects in the strain-displacement field. The modelling of the cross-section as comprising of elastic and inelastic domains allows for the spread of yielding to be modelled accurately, whilst the effects of large displacements, material nonlinearity and the rate-dependent effect of steel material due to dynamic loading are taken into account. The advantage of the technique is that it overcomes the large discretisation schemes needed using plastic zone methods, which have been established elsewhere to be problematic both in terms of computational efficiency and accuracy. It is also advantageous in providing an accurate alternative to plastic hinge methods, whose accuracy is compromised because of the lumping of inelasticity at the ends of the member. The generic technique that is developed is shown to agree with solutions obtained from the finite element method while it has the potential to be used as a platform for structural analysis and design in which scenarios of progressive collapse are important.

نویسندگان

Amin Heidarpour

Centre for Infrastructure Engineering and Safety School of Civil and Environmental Engineering The University of New South Wales UNSW Sydney, NSW ۲۰۵۲, Australia

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • nonlinear modelling of restrained steel beams at Genericه [16] Heidarpour ...
  • Song L, Izzuddin BA, Elnashai AS, Dowling PJ. [2000]. "An ...
  • Byfield MP.[2006]. :Behaviour and design of commercil multistorey buildings subjected ...
  • Liew JYR, Chen H. [2004]. "Explosion and fire analysis of ...
  • Chen H, Liew JYR. [2005]. "Explosion and fire analysis of ...
  • Jama HH, Bambach MR, Nurick GN, Grzebieta RH, Zhao X-L. ...
  • Johnson JL, Martin JB. [1969]. _ permanent deformation of a ...
  • Wegener RB, Martin JB. [1985]. 'Predictions of permanent deformation of ...
  • Liew JYR. [2008]. "Survivability of steel frame structures subjected to ...
  • Sabuwala T, Linzell D, Krauthammer T. [2005]. :Finite element analysis ...
  • ABAQUS FEA, Simulia .[2008]. Providence, RI, USA. ...
  • Lie TT, editor. [1992]. Structural fire protection. New York, NY, ...
  • Perzyna P.[1966]. :Fundamental problems in viscoplasticity ." Advances in Applied ...
  • Izzuddin BA, Fang Q. [1997]. "Rate- sensitive analysis of framed ...
  • Newmark NM. [1959]. _ method of computation for structural dynamics." ...
  • Maplesoft Inc., Maple 12. [2008]. Maplesoft, Waterloo, Ontario, Canada. ...
  • Heidarpour A, Bradford MA [2010]. _ _ discretisation formulation for ...
  • Broken Hill Proprietary Limited, Hot rolled products. [1998]. Melbourne, BHP. ...
  • Smith PD, Hetherington JG. [1994]. _ and ballistic loading of ...
  • نمایش کامل مراجع