Analyzing Magnetorheological Squeeze Film Dampers Considering Temperature Rise

سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,009

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ISME18_616

تاریخ نمایه سازی: 1 تیر 1389

چکیده مقاله:

In this paper a conventional squeeze film damper (SFD) filled with magnetorheological (MR) fluid is considered. This specific device can be used in order to control unwanted vibration of rotary machinery. MR fluids generally behave as non-Newtonian fluids. Bingham plastic model is one of the best models that most likely represent mechanical behaviors of MR fluids. In this paper, assuming Bingham plastic model as governing equation of MR fluid, the hydrodynamic equation of system is presented. Assuming isoviscous analysis, two thermal models for MRSFD are developed; first model only considers changes in temperature of MR fluid while the second model takes into account temperature variation of other parts in MRSFD as well. In order to develop the thermal models, the heat production inside MRSFD has been formulated. Simulations have been carried out for different working conditions of MRSFD and pressure distribution and forces acting in the system have been found. Studies also show that there are three important parameters in the system that affect the temperature rise in system; eccentricity, rotational velocity and inputcurrent. Investigations indicate that temperature rise in this system affects the forces acting in the system seriously in a manner that by increasing the values of eccentricity and input current the forces tend to decrease in value, while when no thermal effect is considered they tend to increase in value. This study also conclude that not only the temperature effect is so serious in MRSFDs but also choosing a thermal model thatincludes the temperature rise in components of MRSFD is of great importance.

نویسندگان

Hamed Ghaednia

MSc student, Mechanical Engineering Department, Amirkabir University of Technology;

Abdolreza Ohadi

Associate Professor, Mechanical Engineering Department, Amirkabir University of Technology

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • [1] Tichy, J.A., 1993. "Behaviour of squeeze film damper with ...
  • Wang, J. and Meng, G., 2005. "Study of Vibration Using ...
  • Wang, J. and Meng, G., 2003. "Experimental study on stability ...
  • نمایش کامل مراجع