Investigation of Mechanical Structure on Metal Based Composites Formed by Laser after Tensile Test
محل انتشار: بیست و پنجمین همایش سالانه مهندسی مکانیک
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 484
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME25_051
تاریخ نمایه سازی: 13 شهریور 1396
چکیده مقاله:
In this study, the mechanical structure of two metal basedcomposites which were formed by Ytterbium fiber laser areevaluated after the tensile test; two-layered stainless-steelSUS304L/Copper C11000 composite and three layeredstainless-steel SUS430/copper C11000/stainless-steelcomposite. Laser beam irradiation causes a different crosssectionalreduction in both composites in the heat affectedzone (HAZ) compared to other areas of tensile testspecimens. In fact, the reduction of area in the HAZ is muchless than other areas. The main reasons for this are theincrease in thickness and compressive residual strain in thisarea. The laser beam irradiation is greatly reduced the cracksgenerated in the copper layer of two layered composite inthe HAZ.
کلیدواژه ها:
Metal based composite- Laser forming- Tensiletest- Mechanical properties
نویسندگان
Hamed Delfan Abazari
MSc. Depatment of Mechanical Engineering, University of Birjand, Birjand, Iran
S.M. Hossein Seyedkashi
Assistant professor, Depatment of Mechanical Engineering, University of Birjand, Birjand, Iran
M Hoseinpour Gollo
Associate professor, Depatment of Mechanical Engineering, Shahid Rajaee Teacher Training University, Tehran, Iran