Models for Manufacturing of Composite and Hybrid Materials

سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 333

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ISME25_044

تاریخ نمایه سازی: 13 شهریور 1396

چکیده مقاله:

In this paper, the modelling and experimental works arepresented which were carried out at TU Delft on themanufacturing process of thermoset composites in generaland more specifically on Fibre Metal Laminates (FMLs).Modelling is based on a thermo-viscoelastic approachdeveloped for composites which have an orthotropicviscoelastic response. Indeed the curing stresses are alsoincorporated due to the matrix shrinkage and evolution ofthe stiffness. Thermal and viscoelastic responses of thepolymeric part are experimentally characterised. A userdefined material model is added to ANSYS able to analysethe orthotropic thermo-viscoelastic behaviour. Thecharacterisation process and the models are applied toGLARE and the residual stresses and curvature of nonsymmetricpanels are calculated. Comparison to themeasured curvature of manufactured laminates, shows theaccuracy of the modelling and the materialcharacterisations.

نویسندگان

Morteza Abouhamzeh

Research associate, Faculty of Aerospace Engineering, Delft University of Technology, Kluyverweg ۱, ۲۶۲۹ HS Delft, The Netherlands