Performance of cold-formed steel shear walls with single and double sided steel sheet sheathing subjected to cyclic loading
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 386
فایل این مقاله در 23 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISSS07_071
تاریخ نمایه سازی: 10 تیر 1396
چکیده مقاله:
In high risk seismic regions, designers of structures with cold-formed members may tend to employ shear walls with steel sheathing to provide a higher shear capacity. This paper presents an experimental investigation into cold-formed steel shear walls with steel sheathing in one sideand both sides with different failure modes. Adding a steel sheathing on the second side increases the shear strength and stiffness of the walls. Shear strength improvement ratio, ductility ratio, and energy dissipation for walls with frame connection failure mode were higher thanwalls with chord stud failure mode
کلیدواژه ها:
نویسندگان
S Mohebbi
School of Civil Engineering, College of Engineering, University of Tehran, Tehran, Iran
R Mirghaderi
School of Civil Engineering, College of Engineering, University of Tehran, Tehran, Iran
F Farahbod
Building and Housing Research Center (BHRC), Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :