Integration of a Refrigerated Display Cabinet with Phase Change Material Heat Exchanger

سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 376

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IESM03_015

تاریخ نمایه سازی: 6 اردیبهشت 1396

چکیده مقاله:

In this paper, the performance of a refrigerated open-type multi-deck display cabinet with integration of phase change material (PCM) was investigated experimentally. The PCM was purposely selected to obtain appropriate melting and freezing temperatures for this application. It was then charged into two types of heat exchangers (HEs) which were installed immediately after the cabinet evaporator in the main back flow channel such that the cooled air flow could pass through both HEs. The display cabinet with and without PCM integration was then mounted in an air conditioned chamber and tested at the same operating condition to measure and compare the performances of system and components. The tests results showed that by installing the PCM-HEs, energy savings and lower cabinet temperatures could be achieved. Further benefits could also be obtained such as more stabilization of the product temperatures during defrost period for the modified display cabinet.

نویسندگان

F Alzuwaid

RCUK National Centre for Sustainable Energy use in Food chains (CSEF), Brunel University London, UB8 3PH, UK

Y.T Ge

RCUK National Centre for Sustainable Energy use in Food chains (CSEF), Brunel University London, UB8 3PH, UK

S.A Tassou

RCUK National Centre for Sustainable Energy use in Food chains (CSEF), Brunel University London, UB8 3PH, UK

A Raeisi

Design and Development Department, Dyson

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • _ International Conference on Industrial Engineering & Sustainable Management (IESM ...
  • K. Azzouz, D. Leducq, and D. Gobin, "Enhancing the performance ...
  • B. Gin, M. M. Farid, and P. K. Bansal, "Effect ...
  • E. Oro, L. Miro, M. M. Farid, and L. F. ...
  • B. Gin and M. _ Farid, "The use of PCM ...
  • E. Oro, L. Miro, M. M. Farid, and L. F. ...
  • M. Liu, W. Saman, and F. Bruno, "Development of a ...
  • M. Ahmed, O. Meade, and M. a. Medina, "Reducing heat ...
  • F. Wang, G. Maidment, J. Missenden, and R. Tozer, "The ...
  • F. Wang, G. Maidment, J. Missenden, and R. Tozer, "The ...
  • J. Cui and S. Wang, "Application of CFD in evaluation ...
  • Y. L. Lu, W. H. Zhang, P. Yuan, M. D. ...
  • _ International Conference on Industrial Engineering & Sustainable Management (IESM ...
  • نمایش کامل مراجع