Balancing and optimization of electrical energy consumption in buildings
محل انتشار: کنفرانس بین المللی فناوری و مدیریت انرژی
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 572
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IEAC02_200
تاریخ نمایه سازی: 19 اردیبهشت 1395
چکیده مقاله:
Energy consumption in buildings is under the influence of various factors on the location of the building, type of Design and orientation of the building and land use and how to use the building. In order to meet the energy standards for buildings and determine a suitable model of the building envelope and building systems studied. Building envelope in accordance with the regional climate and the characteristics and thermal insulation materials used in building systems in accordance with the requirements of the building must be checked. For this purpose, the temperature required for different parts of a building and the amount of energy loss in any specified area .to determine the energy loss of each section is provided in the control list of energy consumption (energy checklist) is that In this part of energy consumption and the level of energy consumption in buildings is necessary for different types of energy, including electric energy. To compare the results, were selected, five different types of land uses, including residential apartment complex of 12 floors, residential apartments 4-storey, 13-story office building, 600 bed hospitals, hotels 5 floors and 60 rooms. The energy consumption of different buildings and saving energy after the implementation of solutions to optimize the efficiency of short-term and medium-term economic strategies and it shows. Optimizing and saving energy solutions are applicable and monuments made two proposals in buildings. Monitor the implementation of these strategies and their efficiency in the process of building proposals are far better However, changes in the heating, Cooling and air conditioning systems, control openings, adding insulation and heat Can be up to 30% of the amount of energy loss in buildings that are currently used, the effect is. Optimizing and saving energy strategies are need information, education, and comprehensive planning.
کلیدواژه ها:
نویسندگان
Alireza Rezaee
Assistant professor of Department of system and Mechatronics Engineering, Faculty of New sciences and technologies, University of Tehran, Tehran, IRAN
Amir Samadbin
Student of Department of system and Mechatronics Engineering, Faculty of New sciences and technologies, University of Tehran, Tehran, IRAN
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :