Influence of Column Section on the Seismic Behavior of Special Concentrically Braced Frames

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 660

فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ISSS05_049

تاریخ نمایه سازی: 1 آذر 1394

چکیده مقاله:

Steel braced frames are commonly used lateral-load resisting systems indesign codes. Special concentrically braced frames (SCBFs) are increasinglyused in seismic regions in recent years due to their satisfactory behavior anduncertainty as to the performance of special moment resisting frames after the١٩٩٤ Northridge Earthquake. In SCBFs, the braces are connected to thebeams and columns by gusset plate connections, and energy dissipation isprovided by the tensile yielding and post buckling deformation of the brace.In recent years, a number of studies have examined different factors, whichinfluence the performance of SCBFs. Most past experiments focused on thebehavior of the gusset plate and the brace member.This study is carried out to investigate the effect of column section and theflexibility of the connection region caused by that on the overall behavior andperformance of the system. Joint flexibility exists when the column iscomposed of double column sections or when the brace is connected to thebox shape columns. The FE numerical model and the concept of plasticequivalent strain were used to predict the lateral load capacity, frame ductilitycapacity, and possible failure modes. A parametric study was performed toexamine the influence of column section properties on the performance ofspecial concentrically braced frames. The results showed that when themoment of inertia of the column is constants, the effect of column section andits local flexibility is more noticeable on the ductility capacity in comparisonto the load capacity of the frame.

کلیدواژه ها:

Steel concentrically braced frames ، Seismic behavior ، column section

نویسندگان

H Kahrizi

Graduate student in Struct. Eng., Dep. of Civil and Environmental. Eng , Tarbiat Modares University, Tehran, Iran

A.A Aghakouchak

Prof. of Struct. Eng., Dep. of Civil and Environmental. Eng, Tarbiat Modares University, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • AISC, A., Steel Construction Manual; American Institute of Steel Construction. ...
  • Lehman, D.E., et al., Improved seismic performance of gusset plate ...
  • Krawinkler, H., 1992. Guidelines for cyclic seismic testing of components ...
  • Fooladvand, A., 2013. Experimental and Numericl Study of Ductility of ...
  • El-Tawil, S. Mikesell, T., Vidarsson, E., and Kunnath, S. K., ...
  • Ferreira, J., Castiglioni, C. A., Calado, L., Rosaria, and Agatino, ...
  • Kanvinde, A. M., and Deierlein, G. G., 2005. Continuum based ...
  • Yoo, J.H., 2006. Analytical investigation on the seismic performance of ...
  • Yoo, J.-H., D.E. Lehman, and C.W. Roeder, 2008. Influence of ...
  • نمایش کامل مراجع