A Simple Approach for Estimating Ultimate Curvature of Structural Steel Sections
محل انتشار: پنجمین کنفرانس ملی زلزله و سازه
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,200
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CESCM05_017
تاریخ نمایه سازی: 10 شهریور 1393
چکیده مقاله:
Ultimate state of structural members has been widely used for the purpose of seismic design and rehabilitation in seismic standards. Even, common damage indices such as Park and Ang use ultimate state of structural response, known as ultimate deformation. This deformation can be expressed as displacement or, rotation and, curvature of flexural members. In this study, correlation between ultimate curvature and depth of I and, H shaped structural steel sections has been investigated and, a simple relationship to estimate ultimate curvature is presented. It is shown that, this relationship is accurate enough to replace the time consuming pushover analyses to obtain ultimate curvature of mentioned sections.
کلیدواژه ها:
نویسندگان
Arman Kamalzadeh
M.Sc. Student in Earthquake Engineering, K.N. Toosi University of Technology, Department of Civil Engineering, Tehran, Iran
Reza Karami Mohammadi
Assistant Professor, K.N. Toosi University of Technology, Department of Civil Engineering, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :