The Influence of Toric Prominence (TP) on The Equal Channel Angular Pressing (ECAP)

سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 857

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICME12_374

تاریخ نمایه سازی: 25 شهریور 1392

چکیده مقاله:

In this paper, Equal Channel Angular Pressing (ECAP) is studied using Toric Prominence (TP) on commercially pure aluminum. ECAP is one the most popular SPD processes. During this process the material is subjected to severe deformation causing extreme changes in mechanical and metallurgical properties of workpiece. The mechanical properties were studied as a function of TP Height (TPH). In this study, different heights of 14, 16, 18mm were studied. The finite element simulations were carried out using Deform 3D. Finite element modeling shows that the values of the equivalent plastic strain and its distribution, equivalent stress and deformation forces depend extremely on TPH and its profile. The numerical results show that effective strain and deformation force are increased with increasing of TPH.

کلیدواژه ها:

نویسندگان

H.R. Rezaei Ashtiani

School of Mechanical Engineering, College of Engineering, Iran University of Science and Technology, Arak, Iran

S. Aradpur

School of Mechanical Engineering, College of Engineering, Iran University of Science and Technology, Arak, Iran

A. Joodaki

School of Mechanical Engineering, College of Engineering, Iran University of Science and Technology, Arak, Iran

S. Ansari

School of Mechanical Engineering, College of Engineering, Iran University of Science and Technology, Arak, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • TP _ of the workpiece. The extent of inhomogeneous [11] ...
  • Iternational Conference on Manufacturing Engineering ICME2011, Tehran, Iran ...
  • doi:10. 1 _ 1 6/j _ msea. 2009.09.052 _ ...
  • doi:10. 1 _ 1 6/j .msea.2005 .08.089. ...
  • Zuyan, W. Zhongin, Journal of Materials Processing Technology 94 (1999) ...
  • D. Yamaguchi, Z. Hoita, M. Nemoto, T.G. Langdon, Scr.Mater. 41 ...
  • H.S. Kim, Mater. Trans. JIM 42 (2001) 536. ...
  • نمایش کامل مراجع