The best diameters for lateral and manifold in pressurized irrigation
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: فارسی
مشاهده: 4,710
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
SADHE01_058
تاریخ نمایه سازی: 29 فروردین 1392
چکیده مقاله:
In this study using HydroCalc software, ability of single and tapered pipes in pressure loss adjusting has been compared. In single lateral-tapered manifold system due to the lower pressure loss in laterals, can be use from several types of pipe diameters for manifolds but in tapered lateral-tapered manifold system due to the more pressure loss in laterals, the choice is limited. The best diameters for tapered manifolds with single lateral were 69.2-36.8 mm, 69.2-58.2-36.8 mm, and 58.2-46.0-36.8 mm whereas the best diameters for tapered manifold with tapered lateral were 69.2-46.0-36.8 mm
کلیدواژه ها:
نویسندگان
Mohammad Valipour
Department of Irrigation and Drainage Engineering, College of Abureyhan, University of Tehran, Pakdasht, Tehran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :