STRUT-AND-TIE MODELS FOR HEADED 1 BAR DEVELOPMENT IN C-C-T NODES
محل انتشار: نهمین کنگره بین الملی مهندسی عمران
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,745
فایل این مقاله در 19 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICCE09_137
تاریخ نمایه سازی: 7 مهر 1391
چکیده مقاله:
This study presents strut-and-tie models (STM) explaining the development of bond strength along bonded length together with anchorage by head bearing of headed bars. The anchorage at a head requires construction of a biaxial compressed nodal zone and bond resistance needs to use the concept of a smeared node. This model consists of a strut with the nodal zone at head for head bearing and fan-shaped stress field for bond stresses along the development length. This modeling clarifies interaction between head bearing and bond resistances where a bond transfers along the development length of headed bars is necessary for a smooth force flow. The experimental results For series of headed bars with relatively small area of plate heads are interpreted 1 by this proposed model
کلیدواژه ها:
نویسندگان
Farhang Farrokhi
Assistant Professor, Civil Engineering Department, University of Zanjan , Zanjan, Iran
mehdi shahidi
Student, Civil Engineering Department, University of Zanjan , Zanjan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :