3D Simulation of Turbulent Dividing Flow: A Model Comparision
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,133
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NCHP03_394
تاریخ نمایه سازی: 3 فروردین 1391
چکیده مقاله:
The flow at a channel bifurcation is turbulent, highly three-dimensional (3D) and has many complex features. This necessitates a deeper insight into the flow patterns, sediment transport and local scouring phenomenon near the solid boundaries. This paper reports a 3D numerical investigation of these features in an open channel. Simulations have been done on rectangular channel geometry, with smooth bed and sidewalls. The standard k-e, k-w model of Wilcox, and RSM turbulence models are compared using the commercial code FLUENT. The simulation results have been compared with available experimental data. It was found that all of the turbulence models tested here accurately predicted velocity profiles in the main channel but in the branch channel, the RSM model performs best with the k-w model performing better the k-e model
کلیدواژه ها:
نویسندگان
AKBAR SAFARZADEH
Assistant Professor of Civil-Hydraulic Engineering Faculty of Engineering,Mohaghegh Ardabili University
ZOLFAGHAR SAFARZADEH
Faculty Member Islamic Azad University, Ardabil Branch
S. A. SALEHI NEYSHABOURI
Professor of Hydraulic structures Water Engineering Research Institute, Tarbiat Modares University
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :