Effects of Assemble Parameters on Performance of Noncircular Lobed Journal Bearings Lubricated with Micropolar Fluid

سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,700

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ISME19_093

تاریخ نمایه سازی: 2 اردیبهشت 1390

چکیده مقاله:

In this work generalized differential Quadrature (GDQ) method as a simple, efficient and high order numerical technique is used for the solution of modified Reynolds equation to obtain the performance of hydrodynamic circular and noncircular lobed journal bearings lubricated with micropolar fluid. Effects of micropolarity characteristics of lubricant and assemble parameters, namely the nondimensional characteristic length, coupling number, mount and tilt angles on the performance parameters of these bearings have been investigated. The computed results show that depending on the characteristic length and the coupling number, there will be significant changes on the performance parameters. These results show, compared with Newtonian fluids, that micropolar fluids exhibit increase in load carrying capacity but decrease in coefficient of friction, attitude angle and side leakage flow. Also it is observed that the effect of micropolar fluids is more pronounced at high coupling numbers. Also results show that the variation of mount and tilt angles can has variable effects on noncircular lobed journal bearing performance parameters. Among the two types of noncircular bearings considered, the effect of the mount and tilt angles is more significant for two lobe bearings in comparison to three lobe bearings.

کلیدواژه ها:

نویسندگان

Mahdi Zare Mehrjardi

PhD Student, Department of Mechanical Engineering, Yazd University

Asghar Dashti Rahmatabadi

Assistant Professor, Department of Mechanical Engineering, Yazd University

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Micropolar characteristic parameters _ of the lubricant improve the performance ...
  • The journal bearings with different preload values (6) are not ...
  • In the noncircular journal bearing the effect of mount and ...
  • نمایش کامل مراجع