ParetoOptimization of Forward-Curved Blades Centrifugal Fans

سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,690

فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد

این مقاله در بخشهای موضوعی زیر دسته بندی شده است:

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

EASTTEHRANMECH01_250

تاریخ نمایه سازی: 2 اسفند 1389

چکیده مقاله:

Increasing of head rise (HR) and decreasing of head loss (HL), simultaneously, are important purpose in the design of different types of fans. Therefore, multiobjective optimization process is more applicable for the design of such turbo machines. In the present study, multi-objective optimization of Forward- Curved (FC) blades centrifugal fans is performed at three steps. At the first step, Head rise (HR) and the Head loss (HL) in a set of FC centrifugal fanis numerically investigated using commercial software NUMECA. Two meta-models based on the evolved group method of data handling (GMDH) type neural networks are obtained, at the second step, for modeling of HRandHLwith respect to geometrical design variables. Finally, using obtained polynomial neural networks, multi-objective genetic algorithms are used for Pareto based optimization of FCcentrifugal fans considering two conflicting objectives,HR and HL. It is shown that some interesting and important relationships as useful optimal design principles involved in the performance of FC fans can be discovered by Pareto based multiobjective optimization of the obtained polynomial meta-models representing their HR and HL characteristics. Such important optimal principles would not have been obtained without the use of both GMDH type neural network modeling and the Pareto optimization approach.

کلیدواژه ها:

Forward-Curved Blades Centrifugal Fan ، Multi-objective optimization ، CFD ، GMDH ، Genetic Algorithms

نویسندگان

A. Khalkhali۱

۱Department of Mechanical Engineering, Faculty of Engineering, Islamic Azad University, East Tehran Branch, Tehran, Iran

H. Safikhani۲

۲Hydraulic Machinery Research Institute, School of Mechanical Engineering, College of Engineering, University of Tehran

M Pour mohammad۳

۳Department of Mechanical Engineering, Faculty of Engineering, Islamic Azad University, East Tehran Branch, Tehran, Iran