ورود
مقالات فارسیISIکنفرانسهاژورنالها

انتشار مقالات کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی

سه شنبه، 13 اسفند، 1398
انتشار مقالات کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
مقالات کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی در تاریخ ۱۳ اسفند ۱۳۹۸ در پایگاه سیویلیکا نمایه و منتشر شد. این رویداد در تاریخ ۲۹ بهمن ۱۳۹۸ تا ۳۰ بهمن ۱۳۹۸ توسط دانشگاه علم و صنعت ایران و تحت حمایت سیویلیکا در شهر تهران برگزار شده است.در این رویداد ۹۳ مقاله شامل ۱۸۶ صفحه ارائه شده است.بر اساس تحلیل اولیه انجام شده، مقالات این دوره از کنفرانس عمدتا در موضوعات زیر ارائه شده است:
- microstructure
- mechanical properties
- low
- non
- finite element method
- wavelet analysis
- shape memory alloys
- sandwich panel
- renewable energy
- tensile strength

لیست و عناوین مقالات نمایه شده از کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی به صورت زیر می باشد:

1. Mathematical Modeling of Unequal Rivets’ Shearing Load Distribution


2. A Novel Surface Nanocomposite of Carbon Nanotube/Poly Ether Ether Ketone Fabrication via Friction Stir Processing for Orthopedic and Dental Application


3. Experimental Study of Low-velocity Impact on Polyurethane Foam Core Sandwich Panels Reinforced by Steel Wire


4. Experimental Investigation of GFRP Reinforced Concrete Tensile Strength Using Brazilian Test Method


5. Mechanical Crystallization of Fe-Ti Alloy during Ball Milling


6. Phase Analysis of Mg-Si-Ni In-situ Composites


7. Kinetics Study on Size and Morphology of KTP Nanoparticles Synthesized by Co-precipitation Method Using PVA as Capping Agent


8. Experimental and Numerical Study on Impact Resistance of Aluminum-Copper Cladded Sheets


9. Experimental and Numerical Study on Fracture in Notched Functionally Graded Metallic Biomaterials


10. Experimental Study on the Fatigue Behavior of Conventional and Severe Shot Peened Molybdenum Alloy Steel


11. Investigation of Mechanical Properties of PMMA Cement Impregnated with Ciprofloxacin and Vancomycin


12. Microstructure and Phase Formation in the Mg-Zn-Ca-RE Magnesium Alloys


13. In-plane Fracture Assessment of Cracked Bone Cements by means of the Generalized Strain Energy Density Criterion


14. Geometric Simulation of Surface Topography in Unstable Boring Process Using 3D ACIS Modeler


15. Torsion of a Thin Film Coated Shaft Using FEM


16. Tensile Characteristics of Through-the-thickness Stitched E-Glass/Epoxy Composite


17. Buckling Enhancement of E-Glass/Epoxy Composite Laminates by Through-the-thickness Stitches


18. Experimental and Numerical Analysis on Compression Behavior of Smart Composite Sandwich Panel with Cor1gated Core


19. Experimental and Numerical Analysis on Compression Properties of Corrugated Core Composite Sandwich Panel


20. Experimental Investigation on Compression Properties of Hollow Composite Cylinder Reinforced by Glass Fiber and Shape Memory Alloy Wire


21. Tribology Investigation on Aluminum Sheets for Forming Applications


22. Effect of Heat-treatment on Microstructure and Mechanical Properties of an Automotive Body Steel


23. Effect of Post Weld Heat Treatment on Tensile Behavior of Al 2024-T8 Friction Stir Welded at Different Rotational Speed


24. Experimental Analysis of Effect of Shape Memory Alloy Wires on High-velocity Impact Response of Corrugated Core Composite Sandwich Panel


25. An Experimental Study of the Internal Space of Hand in Strength-grip Position for the Ergonomic Design of Hand Tools


26. Effect of Probe Indentation Depth on Mechanical Behavior of Friction Stir Spot Weld of Al 6061-T6


27. Troubleshooting Mill Fan in Kerman Cement Company by Vibration Analysis Method(Case Study)


28. Effect of Loading Rate on the Adhesive Bonding of E-glass/Epoxy Composites to Polyethylene: Experimental Approach


29. Viscoelastic Behavior of SMA Reinforced Polymers


30. Adhesion Improvement of Silicone Rubber Coatings to Ceramics


31. Using Shape Memory Alloys to Improve the Fatigue Performance of Polymeric Laminated Composite Materials: Modeling Philosophy


32. Hydrophobicity Improvement of Cycloaliphatic Epoxy-based Nanocomposite Coatings


33. Optimization of Mechanical and Self-Healing Properties of Thermally Reversible Self-Healing Polymer Composites


34. Effect of Acid and Thermal Aging on the Mechanical Properties of E-glass Fibers


35. Computational Study for the Characterization of Fiber-metal Laminates Using Lamb Wave Propagation


36. Assessment of the Effect of Carbon Nanofibers on Matrix Cracking in Laminated Composites Using Lamb Wave Propagation


37. Importance of Grain Growth during Intercritical Anneal of Advanced High-strength Dual-phase Steels


38. The Effect of Raster Orientation on the Mode I Fracture Toughness of Additively Manufactured PC Specimens Printed in the Out-of-plane Direction


39. Effects of Extension Rate on Mechanical Behaviors of PMMA


40. Estimation of Mechanical Properties in Non-homogeneous Body Using Surface Displacement Measurements


41. Image Based Micromechanical Method for Simulation of Damage Zone


42. Experimental Investigation on Stacking Sequence of Glass Fiber Composite Tubes under Quasi-static Axial Compression


43. Biomechanical Analysis of the Effect of Temperature and Humidity on Intervertebral Segments under Impact Load


44. Study on Fatigue Life of Engine-Exhaust Pipe Flexible Couplings


45. Sensory Configuration of Stewart Platform-A Numerical Study


46. Evaluating the Accuracy and Reliability of Digital Image Correlation in One-dimensional Rigid Displacement


47. Deflection Study of Circular Auxetic Thin Plate Under Static Loading


48. Experimental and Numerical Investigation of the Ability of New Material from Aluminum Casting on Pumice Particles to Reduce Shock Wave


49. Laser Measurement Technique in Split Hopkinson Pressure Bar


50. Numerical Simulation of Grooved Heat Pipe Deformation by Extrusion Process


51. Fatigue Finite Element Analysis of a Notched 8630 Alloy Steel Sample under Cyclic Axial Loading


52. Identification of Non-linear Vibrating Systems based on Instantaneous Frequencies and Amplitudes of Dynamic Response


53. Sensitivity Analysis of Continuum Damage Parameters on Error and Scatter-band for Predicted Low-cycle Fatigue Lifetime of AZ61A Magnesium Alloy


54. Evaluation of Flexural Properties of Auxetic Core Sandwich Beams under Three Point Bending Test


55. Small Wind Turbine Propeller: A Special Design and Manufacture Issue for Optimal Renewable Energy Production


56. Disc Brake Analysis and Design: Improve the Thermal Performance Based on Test and Simulation


57. The Effect of Silane on the Curing Characteristics and Mechanical Properties of Natural rubber/Nanoclay/Calcium Carbonate Nanocomposite


58. Influence of Fiber Twisting Angle on the Fracture of Layers of Multilayer Composite Pressure Vessels


59. Effect of Thickness and Number of Layers on the Failure of Multilayer Composite Pressure Vessels


60. Analysis and Optimization of Training Structure Called Car Lifter Lever


61. Initial Stability Analysis of Spine Pedicular Screws Using Modal Analysis Method


62. Improvement of welding tubes using magnetically impelled arc butt welding (MIABW) machine


63. Effect of Fluid Level on Thermal Buckling Behavior of Different Reinforced Water Storage Tanks Adjacent to Pool Fire


64. Effect of Prolonged Bed-rest on Thigh Muscle Atrophy


65. Mechanical Behavior of Natural Sheepskin Leather in Tension


66. Recognition of Optic Disk by Utilization of Histogram of Gradients


67. Feature Selection in Milling Process Utilizing Wavelet Analysis


68. Identification of the Optimum Level of Wavelet Decomposition for Acoustic Emission Signal Denoising of a Milling Machine


69. Quasi-static Axial Compression of Eccentric Thin-walled Aluminum Tubes


70. Experimental Analysis on Tensile Properties of Smart Sandwich Panels with FML Face Sheets Reinforced by SMA Wires


71. Experimental Investigation of Short-term Creep Behavior of Carbon/epoxy Unidirectional Laminates


72. Experimental Study of the Low-Velocity Impact (LVI) on CFRP Composite


73. Modeling of Delamination in Composite Laminates under Fatigue Loading


74. Experimental Study of Deformation and Failure Mechanisms in Unidirectional Fiber-reinforced Polymers


75. Effect of SMA Short Strips on Mechanical Properties of Adhesive joints For Joining Fiber Metal Laminate to Steel Subjected to Tensile loads


76. Experimental Study on Reducing Wear Damage of Gas Turbine Combustor Components Using Hardface Coatings at Elevated Temperatures


77. Experimental Evaluation of the Effect of Surface Roughness on Wear Damage of Gas Turbine Combustor Components


78. Uniaxial Tensile Behavior of Steel 1.4835 at Ambient and Elevated Temperatures


79. Experimental Investigation of Oxidation Rate of Thermal Barrier Coating for a Gas Turbine Combustion Chamber


80. Experimental Investigation of Axial Forces in Centrifugal Compressors Based on API617


81. Introducing a New Mechanism as a Breakwater and Energy Harvester


82. A Novel Mechanism that Harvests Energy via Ideal Hydraulic PTO Units


83. On the Interlaminar Shear Strength of Basalt Fiber/Epoxy Composite Filled with Nano-ZrO2/Graphene Oxide Nanohybrid


84. Effect of CaCO3 Nanoparticles on the Flexural Properties of E-glass Chopped Strand Mat/Epoxy Composites


85. Experimental Investigation of Mechanical Properties of Al/Mg Composite Sheets Manufactured by Roll Bonding


86. Effect of Nano-particle Dispersion Methods on Mechanical Behavior of Al-GFRP Bonded Joints under Bending Moment


87. Designing and Manufacturing of a ۳D-printed, Open-source Acrylonitrile Butadiene Styrene Dynamic Splint for Rehabilitation of Fingers Flexor Tendon Injury


88. Analysis of Fused Deposition Modeling Acrylonitrile Butadiene Styrene Dynamic Splint for Rehabilitation of Fingers and Hands by Finite Element Method


89. Effect of Moisture on Mechanical Properties FML Composite (GLARE) Based on Experimental and FEM Simulation


90. The Effect of Thermal Spray Parameters on the Tensile and Temperature of the Coated Equipment


91. Investigation of Nonlinear Torsional Oscillations on Functionally Graded Nanorod


92. Investigating the Effects of Aerodynamic Force Model on the Response of a Galloping PZT Energy Harvester


93. Effect of Hydroxyapatite Sub-micron Particles on Microhardness and Corrosion Behavior of Mg-3Zn Magnesium Alloy


اخبار مرتبط با کنفرانسها