مقالات مجله مکانیک کاربردی و محاسباتی، دوره 7، شماره 3 منتشر شد

سه شنبه، 12 مرداد، 1400
مقالات مجله مکانیک کاربردی و محاسباتی، دوره 7، شماره 3 منتشر شد
مجموعه مقالات مجله مکانیک کاربردی و محاسباتی، دوره 7، شماره 3 که در سال 1400 منتشر شده بود با تعداد 50 مقاله در پایگاه سیولیکا (CIVILICA.com) نمایه سازی و منتشر شد.
مجله مکانیک کاربردی و محاسباتی (Journal of Applied and Computational Mechanics) توسط دانشگاه شهید چمران اهواز به صورت فصلی از سال 1394 منتشر می شود.
لیست و عناوین مقالات نمایه شده از دوره 7، شماره 3 این ژورنال به صورت زیر می باشد:

1. Biomechanical Evaluation of Bone Quality Effect on Stresses at Bone-Implant Interface: A Finite Element Study


2. Structural Strength Analysis and Fabrication of a Straight Blade of an H-Darrieus Wind Turbine


3. Unsteady Separated Stagnation Point Flow of Nanofluid past a ‎Moving Flat Surface in the Presence of Buongiorno's Model


4. ADM Solution for Cu/CuO –Water Viscoplastic Nanofluid ‎Transient Slip Flow from a Porous Stretching Sheet with Entropy ‎Generation, Convective Wall Temperature and Radiative Effects


5. Numerical Study on Heat Transfer and Pressure Drop in a Mini-‎Channel with Corrugated Walls‎


6. Comparison of Functionally Graded Hip Stem Implants with ‎Various Second-Generation Titanium Alloys


7. Analysis and Optimization of Truss Structures, Constrained ‎Handling using Genetic Algorithm


8. Non-similar Solutions of MHD Mixed Convection over an Exponentially Stretching Surface: Influence of Non-uniform Heat Source or Sink


9. Optimum Design of Nano-Scaled Beam Using the Social Spider Optimization (SSO) Algorithm


10. Numerical Analysis of an Edge Crack Isotropic Plate with Void/Inclusions under Different Loading by Implementing XFEM


11. Comparative Study of Mixed Convective MHD Cu-Water Nanofluid Flow over a Cone and Wedge using Modified Buongiorno’s Model in Presence of Thermal Radiation and Chemical Reaction via Cattaneo-Christov Double Diffusion Model


12. Numerical Simulations of Unsteady ۳D MHD Micropolar Fluid Flow over a Slendering Sheet


13. How Wavelike Bumps Mitigate the Vortex-induced Vibration of a ‎Drilling Riser


14. Four Legged Guará Robot: From Inspiration to Implementation


15. Numerical Investigation on Flow Transition through a Curved ‎Square Duct with Negative Rotation


16. MHD Double-Diffusive Natural Convection in a Closed Space ‎Filled with Liquid Metal: Mesoscopic Analysis


17. Behavior of Nanofluid with Variable Brownian and Thermal ‎Diffusion Coefficients Adjacent to a Moving Vertical Plate


18. Solving Duffing-Van der Pol Oscillator Equations of Fractional ‎Order by an Accurate Technique


19. Effect of Temperature and Moisture on the Impact Behaviour of ‎Adhesive Joints for the Automotive Industry


20. Heat Transfer Improvement in an Open Cubic Cavity using a Hybrid Nanofluid


21. On Stokes' Second Problem for Burgers' Fluid over a Plane Wall


22. On Integrability up to the Boundary of the Weak Solutions to a ‎Class of non-Newtonian Compressible Fluids with Vacuum


23. Nonlinear Vibration of an Electrostatically Actuated ‎Functionally Graded Microbeam under Longitudinal Magnetic ‎Field


24. A Novel Approach to Compute the Numerical Solution of Variable Coefficient Fractional Burgers' Equation with Delay


25. Dynamically Consistent NSFD Methods for Predator-prey System


26. On the Effect of the End-effector Point Trajectory on the Joint ‎Jerk of the Redundant Manipulators


27. Nonlinear Multiscale Modelling and Design using Gaussian Processes


28. Free Vibration Analysis of Functionally Graded Porous Nano-‎plates with Different Shapes Resting on Elastic Foundation


29. Description of Anomalous Behavior of Aluminum Alloys with ‎Hill۴۸ Yield Criterion by Using Different Experimental Inputs ‎and Weight Coefficients


30. Numerical Investigation of an Unsteady and Anisotropic Turbulent ‎Flow Downstream a ۹۰° Bend Pipe with and without Ribs


31. Variational Principles and Solitary Wave Solutions of Generalized ‎Nonlinear Schrödinger Equation in the Ocean


32. Stability Analysis of Articulated Bus in Straight-ahead Running Manoeuvre


33. Finite Element Modelling and Simulation of the Hysteretic ‎Behaviour of Single- and Bi-metal Cantilever Beams using a ‎Modified Non-linear Beta-damping Model


34. A Modified Thermoelastic Fractional Heat Conduction Model ‎with a Single-Lag and Two Different Fractional-Orders


35. An Automatic Program of Generation of Equation of Motion and ‎Dynamic Analysis for Multi-body Mechanical System using GNU Octave


36. Stress Mode Superposition for a Priori Detection of Highly ‎Stressed Areas: Mode Normalisation and Loading Influence


37. The Dynamics of the Working Body of the Tubular Conveyor with ‎the Chain Drive


38. Alternative Integration Approaches in the Weight Function ‎Method for Crack Problems


39. Regularization of the Movement of a Material Point Along a Flat ‎Trajectory: Application to Robotics Problems


40. An Experimental and Numerical Study on the Aerodynamic ‎Performance of Vibrating Wind Turbine Blade with Frequency-‎Domain Method


41. Weighted Dual Approach to an Equivalent Stiffness-based Load ‎Transfer Model for Jacked Open-ended Pile


42. Analysis and Recognition of Standards in Intelligent Hybrid ‎Systems using Natural Computing


43. Parametric Optimization of a Cyclogiro Aircraft Design for Efficient Hover with Aeroelastic Considerations


44. A General Purpose Variational Formulation for Boundary Value Problems of Orders Greater than Two


45. Performance measure and tool for benchmarking metaheuristic optimization algorithms


46. Two-Solid Deposition in Fluid Column using Immersed ‎Boundary-Lattice Boltzmann Method


47. Numerical Investigation of Tissue-Temperature Controlled ‎System in Thermal Ablation: A Finite Element Approach


48. A New Quantum-computing-based Algorithm for Robotic Arms ‎and Rigid Bodies’ Orientation


49. Thermal Behavior of Monocrystalline Silicon Solar Cells: A ‎Numerical and Experimental Investigation on the Module ‎Encapsulation Materials


50. Buckling of Shell Panels Made of Fiberglass and Reinforced with ‎an Orthogonal Grid of Stiffeners