Experimental and Modelling of the 3 Passes Twist Extrusion of Commercial Pure Copper
محل انتشار: دومین کنفرانس نانوساختارها
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,673
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CNS02_096
تاریخ نمایه سازی: 11 اردیبهشت 1389
چکیده مقاله:
Twist extrusion process is a type of Severe Plastic Deformation (SPD) method in order to produce a nano structure. In this study, samples with the cross section of 28*18 mm and length of 70 mm were used. The mean grain size of the samples was about 100μm. TE was conducted under the ambient temperature condition. The mechanical and metallurgical properties of the nano-Cu produced by three clockwise twist extrusions were examined. The ductility of the nano Cu reduced 35% and the hardness increased 120% approximately. The study showed that the grain size distributions across the sample were not uniform
کلیدواژه ها:
نویسندگان
S.A.A Akbari Mousavi
School of Metallurgy and Materials Engineering
A.R Shahab
School of Metallurgy and Materials Engineering