Effect of Processing Conditions of Melt Mixing in Properties of PVC/NBR Nanocomposite
محل انتشار: سومین کنفرانس نانوساختارها
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 4,305
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CNS03_057
تاریخ نمایه سازی: 21 دی 1388
چکیده مقاله:
Thermoplastic elastomers (TPEs) of Poly (vinyl chloride)/ nitrile butadiene rubber (PVC/NBR) with 5%wt nanoclay were melt-mixed using a Brabender Plasticorder.Effect of processing variables such as temperature, rotor speed and mixing time as the governing factors on morphology and properties of polymer blends was investigated. Mixing process of the nanocomposites was studied by plastograms revealed when the blends homogenize. The structure of the blends was investigated by X-ray scattering (XRD). It is argued that at lower temperatures, high tensile properties and storage modulus were gained at longer mixing times and higher rotor speed, but shorter mixing times result in better Properties at higher temperatures. XRD pattern and swelling index of the nanocomposites also confirm the mentioned results.
کلیدواژه ها:
نویسندگان
E Esmizade
Iran polymer and Petrochemical Institute,
G Naderi
Iran polymer and Petrochemical Institute,
M.H.R Ghoreishy
Iran polymer and Petrochemical Institute,
G Bakhshande
Iran polymer and Petrochemical Institute,
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :