OPTIMIZATION OF MULTI-PASS FACE-MILLING USING GENETIC ALGORITHM AND USING HARMONY SEARCH ALGORITHM
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,767
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME08_251
تاریخ نمایه سازی: 27 آبان 1388
چکیده مقاله:
This study presents a harmony search (HS) algorithm to determine the optimum cutting parameters for multi-pass face-milling. The optimum value of machining parameters including number of passes, depth of cut in each pass, speed and feed are obtained to minimize total production cost while considering technological constraints such as allowable speed, feed, surface finish, tool life and machine tool capabilities. An illustrative example is used to demonstrate the ability of the HS algorithm and for validation purpose, the genetic algorithm (GA) is used to solve the same problem. Comparison of Results reveals that the HS algorithm converges to optimum solution with higher accuracy in comparison with GA.
کلیدواژه ها:
نویسندگان
O Zarei
۱Department of Mechanical Engineering, Iran University of Science and Technology,Tehran ۱۶۸۴۶_۱۳۱۱۴, Iran.
R Madoliat
Department of Mechanical Engineering, Amirkabir University of Technology, ۴۲۴-Hafez Ave., ۱۵۸۷۵-۴۴۱۳, Tehran, Iran.
P.M Kashtiban
Msc Student
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :