Modeling and Optimization of Roll-bonding Parameters for Bond Strength of Ti/Cu/Ti Clad Composites by Artificial Neural Networks and Genetic Algorithm
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 30، شماره: 12
سال انتشار: 1396
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 549
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-30-12_010
تاریخ نمایه سازی: 1 اردیبهشت 1397
چکیده مقاله:
This paper deals with modeling and optimization of the roll-bonding process of Ti/Cu/Ti composite for determination of the best roll-bonding parameters leading to the maximum Ti/Cu bond strength by combination of neural network and genetic algorithm. An artificial neural network (ANN) program has been proposed to determine the effect of practical parameters, i.e., rolling temperature, reduction in thickness, post-annealing time, post-annealing temperature and rolling speed on the bond strength of Ti/Cu composite. The most suitable model with correlation coefficient (R2) of 0.98 and mean absolute error (MAPE) 3.5 was determined using genetic algorithm (GA) and the optimum practice condition are proposed. Moreover, the sensitivity analysis results showed the post-annealing temperature with the negative effects is the most influential parameter on the strength of bonding
کلیدواژه ها:
نویسندگان
M Mahdavi Jafari
Department of Materials Science and Engineering, Shahid Bahonar University of Kerman, Kerman, Iran
G.R Khayati
Department of Materials Science and Engineering, Shahid Bahonar University of Kerman, Kerman, Iran
M Hosseini
Department of Mechanical Engineering, Faculty of Engineering, University of Hormozgan, Bandar Abbas, Iran , Department of Materials Science and Engineering, School of Engineering, Shiraz University, Shiraz, Iran
H Danesh-Manesh
Department of Materials Science and Engineering, School of Engineering, Shiraz University, Shiraz, Iran