Effect of heat-input on the microstructure evaluation of carbon steel walls fabricated by wire-arc additive manufacturing(WAAM) technology
سال انتشار: 1401
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 242
فایل این مقاله در 15 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES16_132
تاریخ نمایه سازی: 25 اسفند 1401
چکیده مقاله:
The present investigation is conducted to fabricate three different ۴-layers walls with varyinginputs of heat using the wire-arc additive manufacturing (WAAM) process. In addition, somewalls' heat input has descended from the first layer to the top layer. The present study aimed toevaluate the effect of variable heat input of each wall/layer on the microstructure of low-carbonalloy steel (ER۷۰S-۶) produced by a relatively inexpensive additive manufacturing processusing wire feed arc welding. Microstructure studies show that reducing heat input causes ahigher solidification rate and the formation of finer columnar grains.
کلیدواژه ها:
نویسندگان
Yasamin KhebrehFarshchi
School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran
Mahmoud Nili-ahmadabadi
School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran.
Farzad Khodabakhshi
School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran.
Maryam Mohri
Empa, Swiss Federal Laboratories for Materials Science and Technology, Dübendorf ۸۶۰۰, Switzerland