Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 217
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JACM-8-2_004
تاریخ نمایه سازی: 28 دی 1400
چکیده مقاله:
Horn is one of the main components of ultrasonic cutting systems. The most important characteristics of the horn design are its resonant frequency and amplification factor. Closed-form equations can be used only for the design of simple horns and do not apply to more complex shapes like surgical tools. In This paper, a designing technique based on the finite element method and experimental tests is presented. The conventional design methods are improved, and designing a high performance surgical ultrasonic horn for bone cutting tools is facilitated. The new and complex bone cutting tool has both the knife-edge and toothed-edge, which could cut the bone easily and accurately. The investigations of cutting forces applied to the tool edges show less force in the toothed edge than the knife edge.
کلیدواژه ها:
نویسندگان
Mehdi Rezaei
Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran
Mahmoud Farzin
Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran
Farshid Ahmadi
Department of Mechanical Engineering, University of Kashan, Kashan, Iran
Mohammad Reza Niroomand
Department of Mechanical Engineering, Payame Noor University, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :