Thermodynamic and Thermoeconomic Optimization of an Absorption Refrigeration System integrated with Refinery Crude Oil Furnace
محل انتشار: مجله پردازش گاز، دوره: 7، شماره: 1
سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 335
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_GPJU-7-1_001
تاریخ نمایه سازی: 23 مرداد 1400
چکیده مقاله:
In the present study, exhaust gases from Tehran refinery crude oil furnace are used in a Heat Recovery Steam Generator (HRSG)for generating steam. Then, the steam is directed to a double effect absorption refrigeration cycle to produce cooling. To meet the object, mass and energy balance equations of the coupling is carried out for both the HRSG and the absorption chiller and unknown thermodynamic parameters of the system are evaluated. Afterward, by conducting exergy analysis and using the thermoeconomic method, the cost of the product (refrigeration here) is calculated. Finally, optimization is accomplished simultaneously on both HRSG and absorption chiller in order to minimize the cooling cost by the means of a Genetic algorithm. The outcomes indicate that by using the optimized integrated system ۵۶۲۷ tons of refrigeration is obtainable at the price of ۰.۰۱۰۴ (USD per second). Since the flue gas was wasting to environment pricelessly, it should be noted that by implementing the proposed coupling ۱.۱۸۶×۱۰۷cubic meter of natural gas with the price of ۱.۵۰۸×۱۰۶(USD) will be saved annually.
کلیدواژه ها:
Heat Recovery Steam Generator (HRSG) ، Double effect absorption chiller Exergy analysis ، Thermoeconomic optimization ، Genetic Algorithm
نویسندگان
Mehdi Tavakoli
MSc Islamic Azad University- Sciences & Research Branch, Hesarak, Tehran, Iran
Ehsan Shakib
Assistant Professor Department of Mechanical Engineering, Bozorgmehr University of Qaenat, Qaen, Iran
Majid Amidpour
Professor Faculty of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran
Mohammad Mustafa Ghafurian
PhD Candidate of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :