لیست و عناوین مقالات نمایه شده از اولین کنفرانس بین المللی علم و فناوری خوارزمی به صورت زیر می باشد:
1. Revolutionizing Agricultural Product Management: A Smart Sorting Approach UsingMachine Learning and Artificial Intelligence
2. Investigating the characteristics of Oil produced water in one of the oil desalination plantsin National Iranian South Oil Company and presenting environmental managementsolutions
3. Investigation and comparison of thermoluminescence dosimetry properties of pelletsobtained from synthesized beta-tricalcium phosphate powder using PLS method
4. Advancing Elemental Analyses with "Irick Spectrum" Microwave-Sustained InductivelyCoupled Plasma (IS-MICP) for Optical Emission Spectroscopy
5. A New Arvan Parto Microwave Device for Efficient Pesticide and Dryingof Agricultural Products
6. Investigating Natural Gas Leakage Rates from pipeline at Supercritical Conditions: A CFDand Machine Learning Approach
7. Remote Controlling of the Portable Artificial Kidney based on Artificial Intelligence
8. Effect of alloying element on microstructure and mechanical properties ofCoCrMo alloy for Orthopedic Application
9. Potentiometric Mercury measurement by using coated wire sensor based on benzoylcarbamothiol alanine
10. Construction of SERS plasmonic biosensor based on the growth of silver dendriticnanostructures on copper substrate treated with plasma jet
11. Photo-oxidation of simulated contaminants by CaCu۳Ti۴O۱۲ in visible light
12. Upscaling UAV-derived tree decline severity to satellite data within Zagros forests
13. Leveraging UAV Photogrammetry and Satellite Imagery for Precise Fractional Canopy CoverEstimation in Zagros Forests
14. New approaches in food and agriculture micro-encapsulation
15. Engineering a series of Ce-UiO-۶۶/MCo۲O۴ Heterojunctions for Photocatalytic Cr(VI)Detoxification through the "p-n Junction" Mechanism
16. Constructing a water-resistant heterojunction of metal halide perovskite and MOF-۸۰۸through a mechanochemical approach: An S-Scheme photocatalytic system designed forversatile applications
17. The Effect of Reinforcing Glass/Epoxy Composites with Cotton Fibers on Resistance toDelamination Using Acoustic Emission Test
18. Investigating the capacity of ۵۰ Yeast strains to bioaccumulation zinc and their potentialuse as food supplements in the livestock and poultry industry
19. Enhanced Restoration Mortars for Dry Climates Applications: Introducing Hydrophobic LimePutty Infused with Sesame Oil
20. Mechanized Production of Starch-Based Biodegradable and Antibacterial Plastic withPlant Growth Capability
21. A novel-designed biosensor with gold nanoparticles for Escherichia coli detection inPharmaceutical and real samples
22. Enhanced biohydrogen production by addition of Fe nanoparticles using Enterobacter sp
23. Fermentative production of hydrogen from potato processing wastewater by Enterobactersp.
24. Ca۱۹Zn۲(PO۴)۱۴ Nanoparticles: Synthesis, characterization and its effect on thecolonization of Streptococcus mutans on tooth surface
25. Simulating the bioethanol production process on a pilot scale and investigating the effectof distillation efficiency
26. Evaluation of nitrate consuming bacteria grown in LA and NA medium by differentialmethod for well water treatment
27. Mono- and mixed cultivation of green microalgae applied for treating nitratecontaminated well water
28. Nitrate reduction from simulated media of salty water using Chlorella vulgaris andScenedesmus sp
29. Application of Chlorella vulgaris and Scenedesmus sp. in a simulated nitrate richfreshwater medium under laboratory environment condition
30. Harnessing AMR Factors for Developing Phage Predictive Model Against Avian PathogenicEscherichia coli
31. Biological refining of bread waste in the shadow of the circular economy; A strategic viewwith resilience estimation
32. A new pre-processed DL-DT anomaly detection model in cloud computing
33. Electroconductive hydrogel using CNT as therapeutic tools for spinal cord injury: NewPerspectives on SCI Regeneration
34. Treatment of Zagros Petrochemical’s Wastewater; Coagulation and Flocculation Method
35. An Approximate XOR-based Full-Adder in Quantum Cellular Automata
36. Examining the antibiotic resistance pattern of Salmonella enteritidis isolated fromlivestock
37. The modeling of thermal lens process of glycerol and experimental investigation of thethermal diffusivity of glycerol
38. Investigating the capacity of the Digital Economy and Society Index (DESI) in measuringthe achievement of ICT-related goals in the ۷th Development Plan
39. Synthesis of nanoparticles by green method and investigation of their effect in controllingstrawberry gray mold fungus, Botrytis. cinerea Pers.
40. Biosynthesis of Zinc Oxide Nanoparticles
41. Impact of Antibiotic Resistance, Food Safety, Foodborne Pathogens, Heavy Metals, andMilk Allergy on the Health and Quality Control of Meat, Milk, and Other Dairy Products
42. Optimization of Freeze-thaw Extraction of Phycocyanin from Spirulina platensis
43. Fabricate bone scaffolds using red algae
44. Review of recent developments and natural structures in extracting water from airhumidity
45. Food supplement from the stamens and pollen of the saffron plant with a new processingmethod at the optimal temperature for menstrual disorders
46. Extraction and purification of saffron compounds
47. Investigating the effects of NORM from oil/gas industries on the public internal exposure
48. A quantitative analysis of the impact of cellular replication, radioactive decay, andemitted energy on targeted radiotherapeutic approaches
49. Examining Gross Alpha and Beta Radionuclide Levels in Drinking Water Sources of IlamProvince
50. Identification of microbial agents in some spoiled dairy products
51. Comparative detection of novel coronavirus genome based on Real-time-PCR & RT-LAMP
52. A bi-LSTM Neural Network for ECG-based Shockable Arrhythmia Detection
53. Preparation, characterization and mechanical properties of chitosan/Poly(vinylpyrrolidone)/ZnO bionanocomposite films
54. Molecular identification of the isolated bacteria producing pectinase enzyme from fruitand vegetable soil
55. Synthesis of Highly Efficient Porous Nanocomposite Based on Metal-Organic FrameworkUiO-۶۶-NH۲ On Metal-Organic Framework UiO-۶۶-(COOH)۲ Coated with Nitrogen-RichCompounds/Au-NPs for A۳-coupling preparation of propargyl amines
56. Design of recombinant protein based on two antibacterial peptides against antibioticresistant Acinetobacter baumannii
57. Preparation of Colloidal Chalcopyrite Nanoparticles Used in Solar Cell Applications
58. Beam Steering Array Antenna by employing of Butler Matrix Feed and Broad Band Phase Shifterfor MM-Wave Application
59. Analyzation of Water Usage in the Lurgi Process for Methanol Production
60. Greener Computing: Faster Data Processing with Lower Environmental Impact
61. Investigating the role of telehealth (TeleHealth) in HIV counseling
62. Prospects for HIV vaccination
63. Design and production of a chimeric enzyme with efficient antibacterial properties onStaphylococcus aureus
64. Adsorption of Methimazole Drug on the Ga-N, Ga-P and Ga-As Doped Nanotubes in GasPhase and Water Solvent Using Density Functional Theory
65. Substituent Effects of Anhydride Groups on the Nanographene Derivatives as theDesigned Novel Batteries Using Density Functional Theory
66. Cancer Detection from Histopathological Images Using Deep Learning models
67. The effect of operational conditions on lactase immobilization in calcium alginate beads
68. Analysis of TEC anomalies relation to the ۲۰۰۳ Hokkaido earthquakes greater than ۵ M
69. An engineered endolysin with binding ability to Acinetobacter Baumannii outermembrane
70. An engineered endolysin: degradation of peptidoglycan layer of Acinetobacter Baumanniimembrane
71. Performance Parameters improvement of perovskite solar cell using realistic non-uniformembedded plasmonic nanoparticles
72. Postbiotics, intelligent metabolites
73. Biofixation of CO۲ with cyanobacterium Spirulina sp. in phototrophic condition
74. Microbial Single Cell Protein (SCP) Production Using Municipal Waste
75. Olfactory Analysis of Palm Olein and Cottonseed Oils and Their Various Mixtures
76. Physical Refining of Edible Oils and Fats
77. Short Path Molecular Distillation (SPMD) in Food Processing
78. Physico-Chemical properties and sensory evaluation of Cookies fortified with wheat branand wheat germ flour
79. Evaluation of physicochemical, sensory and microbial properties of microwave, infraredand hybrid baked baguettes during storage
80. Effects of osmotic dehydration pretreatment prior to hot air and microwave drying onBetalain Content and antioxidant activity of Red Beetroot (Beta vulgaris L.)
81. Artificial Intelligence in Additive Manufacturing with Machine Learning Longevity of ۳DPrinted Parts
82. Numerical Study of a Conical Diffuser with Annular Injection at the Inlet to Prevent FlowSeparation
83. Experimental investigation on the potential application of Positron AnnihilationSpectroscopy for tumor hypoxia detection using the J-PET scanner
84. Antibacterial effect of magnetic nanocomposite hydrogel on E.coli
85. Static Loading Analysis of a Composite Wheelchair Frame: A Finite Element Perspective onStress Distribution
86. Continuous synthesis of PEDOT nanoparticles
87. The effect of supplementary process on grain size of boron carbide
88. Efficiency of Chilocorus bipustulatus (Coleoptera: Coccinellidae) in controlling Unaspiseuonymi (Hemiptera: Diaspididae)
89. Introducing the appropriate insecticide to control of euonymus scale in urban green space
90. Emerging Technologies for Food Security in Developing Countries
91. Extraction and chemical evaluation of anthocyanin pigments in hibiscus sabdrifa
92. Extraction and chemical evaluation of anthocyanin pigments from Iris L. violet flower
93. Preparation and Characterization of Microcrystalline Cellulose from corn wastes
94. Design of an Upper Body Passive Exoskeleton
95. AFRA System: A Premium Solution to Increase Sampling Rate in Ordinary Cameras
96. Efficiency of some corrosion inhibitors already used in the oil and gas industry;comparison by QM and MM studies
97. The impact and challenges of emerging artificial intelligence innovations on biodiversityconservation and restoration
98. Phytoremediation and uranium absorption by Bassia scoparia
99. Uranium Transfer factor from soil to Ragweed Plant
100. Determination of Nickel distribution coefficient on soil using the batch method
101. Fabrication of polycarbonate/graphene oxide membrane with high porosity andmechanical strength
102. Membranes for Wearable Artificial Kidney: A Review
103. Enhanced apoptotic effects of phenolic olive leaves extract against breastadenocarcinoma-MCF۷
104. Catalytic Hydrogen release from alkaline sodium borohydride solution using Ni/Pt coatedon SBA nanoparticles
105. Development and evaluation of HIV-۱ diagnostic kits based on recombinant reversetranscription loop-mediated isothermal amplification assay
106. Immunoprotectivity of an antigenic construct derived from Omp۳۴ against A. baumanniiin murine pneumonia model
107. Epoxy composite thermal and anti-corrosion feature enhancement using UIO-۶۶-NH۲grafted MXene nanosheets
108. Numerical investigation of forging defects in the hot closed die forging process of cranelifting hooks using FVM and FEM
109. Specific Targeting of Recombinant Human Pancreatic Ribonuclease ۱ using Gonadotropin-Releasing Hormone Targeting Peptide toward Gonadotropin-Releasing HormoneReceptor-Positive Cancer Cells
110. Carbon quantum dots doped with nitrogen for identification and tracing of microplasticsfrom the southern Caspian SeaCase study: bio-nanocomposite hydrogels based on chitosan/gellan gum/NCQD foradsorbing MPs
111. Stimuli-Chromic Polymer Nanoparticles for Smart Inks, Encryption, Visualization of LatentFingerprints, Sensors, and OLEDs
112. Suggestion of two space-based instruments for earthquake precursor observation in IRAN
113. The effect of different levels of humic acid and salicylic acid foliar spraying on themorphophysiological characteristics and quantitative and qualitative characteristics ofgerbera flowers (jamesonii)
114. Simulation assessment and experimental investigation on lost foam casting andpermanent mold casting of AZ۹۱ magnesium alloy: melt flow, microstructure, andmechanical properties
115. Modeling and Simulation of Drug Release from a pH Sensitive Hydrogel Based System
116. Emerging Trends in Biosensor Technologies: A Comprehensive Analysis Using CAGR, ShareIndices, and the Mann-Kendall Test
117. Direct pellet ۳D printing of highly stretchable elastomer with cyclic shape recoverybehavior
118. The effect of inulin and chicken feet gelatin as an oil and egg substitute on the qualityproperties of low-calorie mayonnaise
119. Active coating based on Okra mucilage and CMC for fried potatoes
120. Effect of nutritional and biological inputs on some biochemical properties of Salviaofficinalis.L
121. Design and simulation of HF band harmonic suppression circuits for use in automatic linkestablishment (ALE)
122. Enhancing Modeling of Complex Face Image Distortions Using Generative AdversarialNetworks (GAN)
123. Synthesis of a Novel Ni(II) Complex of N–Nicotinyl-N, Nʺ-bis (piperidinyl) phosphorictriamide, as a Potential Prodrug Compound
124. A Vitamin B۳-based Ni(II) Complex of N–Nicotinyl-N, Nʺ-bis (Hexamethylene imine)Phosphoric triamide : Synthesis and Characterization
125. A New Ni(II) Complex of a PyridineCarbacylAmidoPhosphate(PCAPh) Ligand,N–Nicotinyl-N, Nʺ-bis (۴-methyl piperidinyl) phosphoric triamide
126. Synthesis of Copper(II) Oxide NPs on Titania-Polypyrrole Thin Film for ElectrochemicalSensing of Creatinine
127. Enhancing public security through the detection of abnormal behavior in surveillancecameras
128. The Role of Emerging Technologies in the Advancement of the Sports Equipment Business
129. Evaluating the Effect of Tire Rolling Resistance on Electric Vehicle Range
130. Investigating and Analyzing the Relationship Between No-Load, Nominal and StallConditions in Electrohydraulic Actuators
131. A review of the effects of aspartame and saccharin on human health
132. Thermal Analysis and Modeling of Magnetic Coils in the Attitude Control Subsystem of aSmall LEO Orbit Satellite
133. Performance Evaluation of PMP Pontoon Bridge under Heavy Vehicle Load Condition
134. Comparison of photoautotrophic and mixotrophic growth and product formation bySpirulina platensis
135. Effect of light management on growth and pigment formation by Spirulina platensis
136. Expression improvement of recombinant endolysin in BL۲۱(DE۳) pLysS
137. Immobilization of Phage endolysin on magnetic nanoparticles
138. Performance Analysis of B۴C/Al Nano-composite as Am-Be Neutron Source Shielding
139. Experimental Study of an Alternative Catalyst in Flameless Catalytic Heater
140. Uncertainty Evaluation of Compressibility Coefficient for Natural Gas by AGA۸ DCM, GERGand NX۱۹ Methods: A Case Study for Tehran Gas Stations
141. Encapsulation of Echinacea purpurea extract by spray drying
142. From Design to Detection: A Novel Graphene Quantum Dot-Based Approach for EnhancedNear-Visible UV Sensing
143. Development and execution of a highly accurate RF converter for application in massspectrometer systems
144. Simultaneous activation of series MOSFETs for quantum applications and optical switches
145. The role of Smart police in improving the security and efficiency
146. Investigating the effect of Bacillus subtilis, Pseudomonas putida and Glomus mosseaefungi on root-knot nematode (Meloidogyne javanica) in laboratory conditions
147. Enhanced Antibacterial Properties of a Alginate-based Bionanocomposite with PlantExtracts from the Lamiaceae Family
148. Design of multifunctional polymer nanocomposite containing Alginate-Carbon dots (CDs)
149. Fabrication of antibacterial spray based on Sodium alginate and chitosan
150. Developing a Functional Bioactive Collagen-Based Scaffold: A Potential Biomaterial forBone Tissue Engineering Applications
151. Modeling of Fluid Flow and Heat Transfer Inside Fin-and-Tube Heat Exchanger withHexagonal Cross-Section of Tubes
152. Synthesis of MnO۲/TiO۲ Composite Photocatalyst for the degradation of Tetracycline inSynthetic Wastewater
153. Removal of direct yellow ۱۲ dye by bacterial strain isolated from Sangan Khaf mine
154. Experiment and Theoretical Studies on Pt, Ni, and Pt-Ni on Graphite Surface; PotentialApplication in Direct Ethanol Fuel Cells
155. Fischer-Tropsch synthesis in a bed fixed reactor using Fe catalyst over Alumina supported
156. Apple Leaf Disease Recognition from images using transfer learning
157. Experimental Investigation of Two Cylinders with Parallel Arrangement at Different Angles
158. Physical treatment of gas-field produced water, an unconventional water source, for reusepurposes
159. Loose Nanofiltration Membrane for Dye Separation in Textile Wastewaterunder Low Pressure
160. Modeling and Designing for Acoustic and Pressure Drop of Perforated Tube in the Path ofUnsteady Compressible Flow
161. Experimental Investigation of Frequency Distribution of Vortex Shedding Caused byTriangular Model at ۰ ° Angle
162. Hydroponic crop system with rotating substrates around its axis
163. Reducing energy consumption of centrifugal fans in ducted split air conditioners throughoptimizing the performance of the integrated fan and electric motor set
164. A New Era in Space: A Review of Small Satellite Mission Reliability Analysis
165. Presenting a method based on neural network to detect noise in SAR imaging radar
166. Providing a method based on data analysis to detect electronic eavesdropping (ELINT)
167. Applications of artificial intelligence in satellite-IoT: A Review
168. Synthesis of pyrido[۲,۳-d]pyrimidines using a new ionic liquid based on tropine as anefficient catalyst
169. Synthesis of Co–Ni Ferrite Nanoparticles with the Ability of Electrochemical Applications
170. Structural and Magnetic Properties of Cobalt Copper Ferrite Ceramic Synthesized througha Solution Combustion Route
171. Methane-air mixture explosion simulation and the resulting over pressure
172. Rare earth elements in phosphogypsum produced by Kimidaran Kavir Company
173. Extraction Process of Cadmium from Zinc Cold Cake using Experimental Design System
174. Investigating the Mineralization Characteristics of the Cold Treatment Cake of the Leadand Zinc Factory in Recovering Cadmium from it
175. Molecular dynamic Simulation of ternary ZrCuAl bulk metallic glass
