Numerical Simulation of Temperature Distribution in the Workpiece due to Electrical Discharge Machining (EDM), Using Hyperbolic Heat Conduction Model
محل انتشار: یازدهمین کنفرانس ملی مهندسی ساخت و تولید ایران
سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,278
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME11_008
تاریخ نمایه سازی: 3 مرداد 1389
چکیده مقاله:
Determination of temperature distribution is reported in the workpiece due to EDM using non-Fourier heat conduction model. The governing equations are expressed in cylindrical coordinates. Equations are solved by deriving the numerical solution. The temperature layers and the profiles of sample calculations show that, it is not acceptable to apply the Fourier heat conduction model for estimating the temperature of workpiece. On the other hand, it can be seen that the numerical solution is in good agreement with the analytical solution that has been presented in the published papers.
کلیدواژه ها:
Electrical Discharge Machining (EDM) – Non-Fourier Heat Conduction – Numerical Solution - Relaxation Time
نویسندگان
Seyfolah Saedodin
Assistant Professor, Department of Mechanical Engineering, Faculty of Engineering, Semnan University
Mohsen Torabi
M.S., Department of Mechanical Engineering, Faculty of Engineering, Semnan University,
Hadi Eskandar
M.S., Department of Mechanical Engineering, Faculty of Engineering, Semnan University
Pouya Salehi
M.S., Department of Mechanical Engineering, Faculty of Engineering, Semnan University
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :