Investigating the Relationship between Various Brittleness Indexes with Specific Ampere Draw in Rock Sawing Process
سال انتشار: 1396
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 520
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJMGE-51-2_004
تاریخ نمایه سازی: 25 خرداد 1398
چکیده مقاله:
This study aimed to develop new statistical models for evaluating the specific ampere draw (SI) based on rock brittleness index in rock sawing process. A variety of rocks, including carbonate and granite, were cut by a fully instrumented laboratory-sawing rig with two different types of circular diamond saws. Laboratory tests were performed at different depths of cut and feed rates. Multiple curvilinear regression analysis was utilized in order to estimate the SI from rock brittleness index and operational parameters. Validation of the developed models was checked by t and F tests. Results showed that among the different brittleness indexes, B۳ has the best accuracy for both granite and carbonate rocks. Finally, it was concluded that the specific ampere draw can be reliably predicted using the proposed models for both hard and soft rocks.
کلیدواژه ها:
نویسندگان
Reza Mikaeil
Department of Mining and Metallurgical Eng, Urmia University of Technology, Urmia, Iran
Saleh Ghadernejad
School of Mining, College of Engineering, University of Tehran, Iran
Mohammad Ataei
Faculty of Mining, Petroleum & Geophysics, Shahrood University of Technology, Shahrood, Iran
Mahmoud Esmailvandi
School of Mining, College of Engineering, University of Tehran, Tehran, Iran