Electrochemical evaluation of three different grades of high nickel ternary cathode material in lithium-ion battery

سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 425

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

CBGCONF05_079

تاریخ نمایه سازی: 3 اردیبهشت 1398

چکیده مقاله:

LiNi0.8Co0.15Al0.05O2 (NCA) is one of the most used materials as an active material in cathode electrode of Li-ion batteries with long cycle-life. NCA can be synthesized via different methods (such as sol-gel and solid state) and different precursors, and therefore, morphology of obtained NCA can be changed. In this paper, three grades of NCA prepared from two companies were investigated electrochemically during 20 charge/discharge cycles. For this purpose, cathode electrodes containing NCA material prepared in two different thicknesses. Then, coin cells including these cathodes and lithium chip as anode were assembled and tested at C/2 rate. Results show that one of the materials of Targray Company has the highest specific capacity and retention of capacity in both thicknesses

نویسندگان

Mohammad Mohsen Loghavi

Institute of Mechanics, Iranian Space Research Center, Shiraz, Iran

Mohsen Babaiee

Institute of Mechanics, Iranian Space Research Center, Shiraz, Iran

Abdolmajid Ghasemi

Institute of Mechanics, Iranian Space Research Center, Shiraz, Iran

Mohsen Babaiee

Institute of Mechanics, Iranian Space Research Center, Shiraz, Iran