Radial Basis Neural Network Models: Model Development and Validation

سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,474

فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد

این مقاله در بخشهای موضوعی زیر دسته بندی شده است:

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICME07_164

تاریخ نمایه سازی: 6 آذر 1388

چکیده مقاله:

A supervised neural network using radial basis network (RBN) is developed. The RBN uses error back-propagation algorithm (EBP) as predictive tools for the modelling process. Since NN based models are expensive techniques, Design of Experiments and statistical techniques have been employed to offset this expense. A comparison between several experimental based models on predictive capability and number of training patterns is given. Very often, the designer is faced with a difficult situation that sometimes information is not available. In such a case, the process modeller can compromise accuracy information for the experimental cost. Several 2-levels, 3-levels, 4- levels, and 5-levels OAs are used. These are L8 OA, L9 OA, L27 OA, L32 OA, and L25 OA respectively. Results show that each individual model has a potential for approximation if used by itself. Besides an attempt to combine the models in a sequence and the resulting composed models are used and compared for approximation. Results of constructing different composed models indicate that using a certain sequence leads to a better model with faster convergence and less predictive error.

نویسندگان

M.H Gadallah

Associate Professor, OperationsResearch Group, Institute of Statistical Studies & Research, Cairo University, Egypt ۱۲۶۱۳

K El-Sayed

M.Sc. Student, Department of Mechanical Engineering, The American University in Cairo, Egypt

K Hekman

Associate Professor, Department of Mechanical Engineering, The American University in Cairo, Egypt

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Tehran Internationl Congress n M anufacturing Engincering (TICME2005) December 12-15, ...
  • Simulation with Experiments", Engineering Research Center for Net Shape Manufacturing ...
  • T. O zel, Y. Karpat, "Prediction of Surface Roughness and ...
  • W.-T. Chien, C.-S. Tsai, "The Investigation on the Prediction of ...
  • Humusoft, User's Manual-MF6 4 Multifunction IO Card. ...
  • Humusoft, User's Man ual-Real Time Toolbox for uses with SIMULINK, ...
  • IZAR Technical Department, tecn ica@izar-tool .com. ...
  • http://www. mfd .mtu .ed u/cvbe rman/machi ni no/trad/milli nq. ...
  • http :/www.en .wi ki ped ia.ord/wi ki/Neu ral-network. http :/www.cs ...
  • http ://www.doc. ic. uk/nd/su rprise96/iou 2nal/vol4/cs1 1 /report.html. ...
  • نمایش کامل مراجع