Optimum Design for Geometric Parameter of DMFC by Application of GA and Experiments
محل انتشار: دهمین کنفرانس ملی مهندسی ساخت و تولید
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,598
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME10_180
تاریخ نمایه سازی: 29 آبان 1388
چکیده مقاله:
The performance of Direct Methanol Fuel cells depends significantly on an appropriate flow field design such as channel's height, channel's wide, channel's length and rib width. With change of channel's height the active area is fixed, but with change of other parameters the active area is changing proportionally so although all of these parameters are very important but the channel's height because of which mentioned reason has a special effect. In this work, we concentrate on the improvement in performance of the Direct Methanol Fuel cell (DMFC) through optimization of the channel height dimensions and because of temperature importance at output power, these two parameters is considered continuousely. For optimization of these parameters, the genetic algorithm is used and an analytical model of DMFC is applied to produce the fitness function. At last some of experiments is applied to validation of algorithm’s results.
کلیدواژه ها:
DMFC – Optimization – Genetic Algorithm – Experimental setup
نویسندگان
M Tafaoli-Masoule
MSc. graduated, Faculty of Mechanical Engineering, Babol University of Technology
M Shakeri
Associate Professor, Faculty of Mechanical Engineering, Babol University of Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :