Numerical Modeling of Interaction Between Hydraulic Fracturing and Layers
محل انتشار: دومین کنفرانس ملی ژئومکانیک نفت
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 395
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NPGC02_103
تاریخ نمایه سازی: 10 تیر 1396
چکیده مقاله:
In this research study, the hydraulic fracturing propagation in multi-layered media (stiff and soft) with different elastic properties is investigated. Therefore, boundary element method based on the displacement discontinuity formulation is presented to solve general problems of hydraulic fracturing propagation in layered formations. The crack tip element and a higher order boundary displacement collocation technique are used to increase the accuracy of the method (2DFPM) in modeling of non-homogenous media. The stress intensity factor and tensile stress near the crack tip under different elastic modulus are evaluated to study the hydraulic fracture propagation. Related to the position of the fracture with interface these factors have different values and finally, they control the fracture propagation. The results show that if the hydraulic fracture originates in the stiffer layer, its capability to cross the layer increases and is vice versa for the softer material. The comparison of the results gained from the numerical method with those in the literature show a good performance of the method in the case of propagation of hydraulic fracture in layered formations.
کلیدواژه ها:
نویسندگان
Mahmoud Behnia
Assistant Professor, Mining Engineering Faculty, Isfahan University of Technology
Mohammad Fatehi Marji
Associate Professor, Mining and Metallurgical Department, Yazd University
Abolfazl Abdollahipour
PhD of Rock Mechanics, Research Institute of Petroleum Industry (RIPI)