Design and analysis of hull (chassis) lathe model TN50BR
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 889
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CRSTCONF02_099
تاریخ نمایه سازی: 21 شهریور 1395
چکیده مقاله:
CNC machine tools, which for shaving and shaping the pieces of wood and metal usually used rotating. Shaving is a common technique used in the industry. The main task of turning the change in the size, frame them, finishing with one or several pieces cut is prepared by adjusting the grate. By assembling equipment and parts on CNC machines scope expanded so it can be done by various operations such as by placing tools such as electric, Tapping and drilling operations like Brqvkary, Qlavyzzny and drilling on the lathe is easily done It is influenced by forces and factors are at work so use this to check the working condition should be under engineering analysis. Therefore, the analysis of its components such as the chassis and it is very important.Topics discussed at the end of Namh, design and analysis of side frames lathe model TN50BR and check the status of your device while loading the device's chassis. The device has been designed using CATIA software and ABAQUS engineering analysis was done by software.
کلیدواژه ها:
lathes - static analysis - Dynamic Analysis
نویسندگان
Sajad Hamedani
Department of Mechanic, kermanshah branch، Islamic Azad university, kermanshah , Iran
Ebrahim Ebrahimi
Department of Mechanic, kermanshah branch، Islamic Azad university, kermanshah , Iran