Prediction of Effect of Nano Silica on Mechanical Properties of Epoxy– Nano Silica Nano composites using Genetic Algorithm

سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 531

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

این مقاله در بخشهای موضوعی زیر دسته بندی شده است:

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICNN05_504

تاریخ نمایه سازی: 30 آبان 1394

چکیده مقاله:

In this paper the effect of addition of nano silica on mechanical properties of pure epoxy such as Young’sModulus, Tensile Strength, Yield Stress and Elongation at break is investigated. The results show that by addition ofnano silica (0 to 7 weight percent) the Young’s modulus, tensile strength and yield stress first decrease (0 to 1) and thenincrease (1 to 7). Elongation first increases and then decreases. Increasing the properties may be due to strong bondingbetween nano-silica and epoxy and decreasing the properties may be due to agglomeration of nano-silica or insufficientbondings which may result the defects in crystal structure. The results show 25.66 %, 56.87 % and 45.84 % improvementin young’s modulus, yield stress and tensile strength, respectively. The numerical results are statistically analysed byMINITAB 17 software and are compared by results obtained from GA modelling code written by MATLAB software.

نویسندگان

S Feli

Department of Mechanical Engineering , Engineering Faculty , Razi University , Kermanshah , Iran

M Mahdipour Jalilian

Young Researchers and Elite Club, Kermanshah Branch, Islamic Azad University, Kermanshah, Iran