Design and Implementation of a 600kV/200kVA High Voltage AC Test System
محل انتشار: شانزدهمین کنفرانس بین المللی برق
سال انتشار: 1380
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,383
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PSC16_107
تاریخ نمایه سازی: 3 مهر 1386
چکیده مقاله:
High voltage test systems are widely used to perform various tests in several fields of the electric power industry. In this paper, after a brief review of some general requirements and standards for a high-voltage test system, the design and simulation results of a particular 600kV/200kVA AC test system have been presented. According to these results, the system meets voltage, power, and partial discharge requirements defined by the IEC standards. Also, the simulation of the electric field on the top electrodes has been performed using the Finite Difference Method. Practical measurements of a 200kV/5kVA scale-down pilot test system confirm the design and simulation results.
کلیدواژه ها:
نویسندگان
Esmaili
Electrical Eng. Research Center, Jahad Daneshgahi, IUST University, Tehran, Iran.
Sadegh Mohammadi
Electrical Eng. Research Center, Jahad Daneshgahi, IUST University, Tehran, Iran.
Graeeli
Electrical Eng. Research Center, Jahad Daneshgahi, IUST University, Tehran, Iran.
Mirghafoorian
Electrical Eng. Research Center, Jahad Daneshgahi, IUST University, Tehran, Iran.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :