Simulation of Lid Driven Cavity Flow at Different Aspect Ratios Using Single Relaxation Time Lattice Boltzmann Method
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 26، شماره: 12
سال انتشار: 1392
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 746
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-26-12_013
تاریخ نمایه سازی: 17 خرداد 1393
چکیده مقاله:
In this paper, the single relaxation time (SRT) lattice Boltzmann equation was used to simulate lid driven cavity flow at different Reynolds numbers (100-5000) and three aspect ratios, K=1, 1.5 and 4. Due torestrictions on the choice of relaxation time in the single relaxation time (SRT) models, simulation offlows is generally limited base on this method and imposing a proper boundary condition will improve the capability and stability of this method. In this work, bounce back rule is imposed to consider no-slip boundary condition on solid walls and constant inlet velocity proposed by Hou was applied at the inletside of the cavity. For a square cavity, results show that with increasing the Reynolds number, bottomcorner vortices will grow but they won’t merge together. In addition, the merger of the bottom cornervortices into a primary vortex and creation of other secondary vortices was shown in the cases which theaspect ratios are bigger than one. Furthermore, at the case which the aspect ratio equals four, and Reynoldsnumber reaches over 1000, simulations predicted four primary vortices, which were not predicted by previous SRT models. The results were confirmed by previous MRT model.
کلیدواژه ها:
نویسندگان
m Taghilou
Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran
m.h Rahimian
School of Mechanical Engineering, College of Engineering University of Tehran, Tehran, Iran