The Fabrication of W/ZrC Composite through Reaction Sintering
سال انتشار: 1401
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 156
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
AEROSPACE21_105
تاریخ نمایه سازی: 10 خرداد 1402
چکیده مقاله:
Considering the problems and high cost related to graphite parts, the tendency to use composite materials such as W/ZrC as a suitable substitute has been noticed. In this study the W-ZrC composites fabricated by in situ reaction sintering of two precursors were compared, ۱-The conventional WC and ZrO۲ which are ball milled with established molar ratio of ۳-۱ for ۱۲ hours, gelcasted to form a green body and then undergo a pressure less sintering cycle, ۲-A new and innovative way in which for the first time ZrSiO۴ was used instead of ZrO۲, and by testing different molar ratio between WC and ZrSiO۴ it was understood that the optimum ratio is ۳-۱ once again.
کلیدواژه ها:
نویسندگان
Mostafa Roosta
Iranian Space Research Center, P.O. Box: ۱۴۵۹۷۷۷۵۱۱, Tehran, Iran
Hamidreza Baharvandi
Department of Materials Engineering, MUT, P.O. Box: ۱۳۳۳۶۹۵۷۱۱, Tehran, Iran
Hossein Abdizade
School of Metallurgy and Materials Engineering, University of Tehran, Tehran, Iran