Production of Nano Leaded Brass Alloy by Oxide Materials
محل انتشار: دومین کنگره بین المللی علوم و فناوری نانو
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,190
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICNN02_491
تاریخ نمایه سازی: 27 شهریور 1391
چکیده مقاله:
In this study, formation of leaded brass by mechanochemical method is investigated using metal oxides and graphite as starting materials. Also, the effects of milling time and atmosphere on this process are evaluated. Alpha brass was produced when CuO, ZnO and PbO were milledunder argon atmosphere in the presence of graphite (as reducing agent). Concurrent reduction of zinc, copper and lead oxides took place in the argon atmosphere, whereas the reduction reactions did not proceed well in the closed chamber filled with air. These reactions were promoted by milling time up to 100 hours. The amount of reduction tends to decrease for longer times
نویسندگان
Iman Farahbakhsh
Islamic Azad University of Qouchan,Khorasan, Iran
S. Hadi Tabaian
Faculty of Metallurgy Engineering, Amirkabir University, Tehran
Jalil Vahdati Khaki
Department of Engineering, University Ferdowsi of Mashhad ,Mashhad
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :