Thermal Analysis of the Rotor of Large Air-cooled Turbo Generators
محل انتشار: سومین کنفرانس ملی صنعت نیروگاههای حرارتی
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,453
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
POWERPLANT03_032
تاریخ نمایه سازی: 22 مرداد 1391
چکیده مقاله:
The present paper deals with an investigation of thermal characteristics of the rotor of large air-cooled turbogenerators. To model the complex geometry of the rotor coolingsystem, thermal network method is applied by considering uniform nodes along the rotor body and rotor conductors. Thermal resistances and different losses are considered andconsequently by employing iterative solution, temperature distribution at different parts and convection coefficient in theairgap and radial subslot are evaluated. Results showed that convection coefficient increases along the rotor axis in radialsubslots. In addition, about 8 degrees of air temperature rise is reported at the end of the subslot. Furthermore, the air is subjected to approximately 25 degrees of temperature rise aspasses from subslot to airgap through radial subslots. In general, the amount of flowrate and angle of inclination ofradial subslot have a dominant role on the cooling effect of the air. This necessitates the need for further optimizing the flow geometry of radial subslots. Results are in good agreement withavailable official data
کلیدواژه ها:
نویسندگان
Masoud Mohammadi
Mapna Generator Engineering & Manufacturing Co. (Pars), Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :