Mitigation of Voltage Sags in a Sample Distribution System Using Flexible D-STATCOM
محل انتشار: نوزدهمین کنفرانس مهندسی برق ایران
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,359
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICEE19_361
تاریخ نمایه سازی: 14 مرداد 1391
چکیده مقاله:
This paper proposes a Flexible D-STATCOM (Distribution STATIC Compensator) and its new controller system, in IEEE 13-bus industrial distribution system, that be able to both mitigate all types of series faults (open-circuit or open conductor faults) and operate as a Distributed Generation (DG), when it supplies power to sensitive loads while the main utility source is disconnected (i.e. it is under islanded operating condition). Thus D-STATCOM operates same as a Flexible DG (FDG) and consequently, it is called Flexible D-STATCOM (FD-STATCOM). In this paper, the 12-pulse FD-STATCOM configuration with IGBT is designed and the graphic based models of the FD-STATCOM are developed using the PSCAD/EMTDC electromagnetic transient simulation program. The reliability and robustness of the control schemes in the system response to the voltage disturbances caused by series faults and islanded operating condition are obviously proved in the simulation results.
کلیدواژه ها:
نویسندگان
Amin Nazarloo
Student Member, IEEE
Meisam Sadeghi
Student Member, IEEE
Seyed Hossein Hosseini
Member, IEEE
Ebrahim Babaei
Member, IEEE
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :