The influence of aging on the microstructure and mechanical properties of a Ni-Cr-Mo alloy

سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,711

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICMH03_068

تاریخ نمایه سازی: 21 تیر 1391

چکیده مقاله:

Nickel based super alloys form a class of high temperature materials which combine several hardening mechanisms providing excellent mechanical and corrosion resistant properties from room temperature up to elevated temperatures. The properties of a material are determined by its chemical composition and microstructure. In nickel-based super alloys besides the size and distribution of hardening intergranular precipitates, the controlling microstructural features include the size and distribution of grains, the size, morphology, distribution and nature of grain boundary precipitates is very important. In this study, a rolled Ni-Cr-Mo alloy with 0.3mm thickness was used as initial material. The as-received materials were solutionized at a temperature of 1242 0C and aged in different temperatures and times to obtain appropriate mechanical properties. The results showed tensile strength and microhardness of heat treated samples reached to about 1756 Mpa and 585 HV after 15h of aging at 725 0C. Also, the α-Cr precipitates were determined as the main reason for improving mechanical properties.

نویسندگان

s Sabooni

PhD student- department of materials engineering, Isfahan university of technology, Isfahan, Iran

r Tahmasebi

MSc- Mining and Metallurgical Engineering Department, Amirkabir University of Technology, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • J.R.Davis ed, "ASM Specialty handbook, Nickel, Cobalt and their alloys", ...
  • Z.A.Fourolis ed., _ high temperature metallic corrosion of sulfur and ...
  • J.A.Gobel, F.S.Pettit, G.W.Goward, Mechanisms for hot corrosion of nickel based ...
  • G.Caironi, E.gariboldi, G.Silva, M.Vedani, "Influence of heat treatments _ the ...
  • J. Saaedi, T.W. Coyle, S. Mirdamadi, H. Arabi, J. Mostaghimi, ...
  • نمایش کامل مراجع