سیویلیکا را در شبکه های اجتماعی دنبال نمایید.

Production of X-Rays Using Charged Particles

سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 251

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJABBR-10-3_003

تاریخ نمایه سازی: 29 شهریور 1401

چکیده مقاله Production of X-Rays Using Charged Particles

Introduction: The charged particles emit electromagnet radiation due to the ionization and excitation of atoms while stopping in the environment. The energy spectrum and irradiation intensity depend on the type and the content of ingredients in the target and their thickness. Materials: The spectrum of the produced X-rays has been examined by placing layers made of metals and other materials as well as changing their thickness in front of the inlet window of the CsI(Tl) scintillation detector. The CsI(Tl) scintillation detector channels have been calibrated using the 60Co and are represented in terms of energy versuce MeV.Results: Results revealed that iron with a thickness of 0.2 mm is the best candidate for producing X-rays. Besides, aluminum and paper are capable of producing X-rays with uniform distribution in the ranges of 0.383-2.357 MeV and 0.383-0.560 MeV, respectively.Conclusion: Results show that the maximum X-ray radiation intensity with the energy of 383 keV is produced due to the stoppage of alpha particles in the iron sheet with a thickness of 0.2 mm. Plastic, aluminum, paper, copper, and lead with X-ray radiation (383 keV) with thicknesses of 0.1-0.4 mm are available, respectively.

کلیدواژه های Production of X-Rays Using Charged Particles:

نویسندگان مقاله Production of X-Rays Using Charged Particles

Mohammad Reza Rezaie

Department of Nuclear Engineering, Faculty of Modern Sciences and Technologies, ‎Graduate University of Advanced Technology, Kerman, Iran

Saeedeh Khezripour

Department of Molecular and Atomic Physics, Faculty of Modern Science and ‎Technology, Graduate University of Advanced Technology, Kerman, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
Ohura M, Ozawa K, Chang J, Yamamoto Y, Morita S, ...
نمایش کامل مراجع