Experimental and Numerical Investigation of Mixed-Mode Fracture of Polyester Resin
محل انتشار: کنفرانس بین المللی فرآورش پلیمرها
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,666
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PPSRC2011_241
تاریخ نمایه سازی: 30 بهمن 1390
چکیده مقاله:
This paper investigates Polyester resin’s mixed-mode fracture behaviour experimentally and numerically; and evaluates the amount of fracture toughness for this material. Experiments were applied on butterfly Arcan specimens. By varying the loading angle from 0° to 90°, pure mode-I, pure mode-II and a wide range of mixed-mode data (specially critical loads) were obtained experimentally. To determine the stress intensity correction factors (KI and KII) of Polyester resin specimen, two dimensional finite-element analysis was performed. By employing experimentally measured critical loads and the aid of the finite-element method, mixed-mode fracture toughness for the Polyester resin was determined. Experiments show that values of critical loads are increases by increasing the loading angle from 30° to 90°, thus specimens has more resistant to failure in the mode-II than the mode-I.
کلیدواژه ها:
نویسندگان
Nima Jamali
Mechanical Engineering Department, Sahand University of Technology Sahand, East-Azarbaijan, IRAN
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :