Comparative Study of Cohesive and Interfacial Fracture Testing of Structural Adhesive
محل انتشار: کنفرانس بین المللی فرآورش پلیمرها
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,707
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PPSRC2011_179
تاریخ نمایه سازی: 30 بهمن 1390
چکیده مقاله:
A broad experimental and analytical effort using fracture mechanics was conducted to investigate and improve the understanding of the mixed-mode cohesive and interfacial fracture behavior of bonded joints. Using the finite-element results, correction factors were applied to the specimens and a polynomial fit was proposed to evaluate the stress intensity factors of a modified version of Arcan specimen with cohesive and interface crack subjected to mixed mode loading. As a part of experimental efforts, mixed-mode fracture tests were performed on modified Arcan specimens using a special loading device. By varying the loading angle, from 0 to 90, mode I, mixed-mode and mode II fracture data were obtained experimentally. The fracture surfaces under different mixed-mode loading conditions were also examined using scanning electron microscopy (SEM). Cohesive and interfacial fracture surfaces obtained at different mixed-mode loading conditions were finally discussed.
کلیدواژه ها:
نویسندگان
m Shameli
Mechanical Engineering Department, Sahand University of Technology Sahand, East-Azarbaijan, IRAN
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :