Effect of different failure criteria on sand onset prediction
سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,323
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
TOIL01_011
تاریخ نمایه سازی: 4 اسفند 1389
چکیده مقاله:
Sand production is an important challenge in upstream oil and gas industry, causes operational andsafety problems and costs producers tens billons of dollar annually.Selection of appropriate failure criteria is necessary for any sand prediction study. Two dimensions ( 2D)failure criteria are used in literature like Mohr-Coulomb failure criteria and Hoek-Brown failure criteria. Mohr-Coulomb is most commonly applied failure criterion in sanding onset prediction. As this criterion does not consider the effect of intermediate principal stress, they are conservative in sanding onset prediction. %D failure criteria like Modified Lade and Drucker-Prager failure criteria which consider effect of intermediate effective principal stress have recently use in sanding onset potential prediction. The aim of this study is comparing of different failure criteria in sanding onset prediction that shows 3D failure criteria are less conservative than other D failure criteria. Also effect of depletion considered that reveals sanding potential increase with depletion.
کلیدواژه ها:
failure criteria ، sand onset potential ، maximum sand free drawdown ، in situ stresses ، rock strength
نویسندگان
Amin Kaffash
Petroleum University of Technology, Ahwaz, Iran
Seyed Reza Shadizadeh
Petroleum University of Technology, Ahwaz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :