Cost and performance analysis of an integrated solar combined cycle with two tanks for indirect thermal energy storage
سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 497
فایل این مقاله در 19 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_EES-8-3_002
تاریخ نمایه سازی: 23 شهریور 1399
چکیده مقاله:
In this paper, the annual and economic performance of an integrated solar combined cycle (ISCC) with indirect energy storage tanks is investigated. The study includes four scenarios, in which the combined cycle performance was studied exclusively in the first scenario. In the second scenario, the integrated solar combined cycle (ISCC) was examined, and the use of supplementary firing instead of solar energy with the assumption of producing the same power as that by the ISCC scenario was examined for the third scenario. For the fourth scenario, the use of energy storage in the form of indirect tanks with the purpose of energy storage during peak solar direct normal irradiation times and discharge during peak power electricity consumption within the network for such power plants were subjected to investigation. Results show that the contribution of solar energy in the annual produced power by the ISCC scenario is 40 GWh, which is 2.2% of the total. In the case that this amount of power is produced using supplementary firing, there will be about 1.98 tons of increased fuel consumption, and about 18 kton increased in CO2 production. By using the energy storage system, the annual power generation increases by 5 GWh, which will raise the plant s annual revenue by 0.25 M$ if the increment occurs during peak hours. Moreover, the levelized costs of energy (LCOE) for the four scenarios are 8.99, 8.86, 9.04, and 9.135 cents/kWh, respectively.
کلیدواژه ها:
Integrated Solar Combined Cycle ، Thermal Energy Storage ، Economic Analysis ، Levelized Cost of Electricity
نویسندگان
Bagher Shahbazi
Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran
Faramarz Talati
Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran
Mohammad Seyyedmahmoodi
Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran
Mortaza Yari
Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :