Experimental investigation of bubble growth and detachment in stagnant liquid column using image – based analysis
سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 318
فایل این مقاله در 23 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_EES-7-4_004
تاریخ نمایه سازی: 2 اردیبهشت 1399
چکیده مقاله:
An experimental study has been carried out to characterize bubble formation, growth, and detachment mechanisms in a stagnant liquid column. Both bubble frequency and bubble detachment size were measured in different gas flow rates, injector diameters and orientations, submergence height, and liquid properties. Experiments were performed for air injection flow rate ranges between 200 mlph and 1200 mlph using needle diameters of 1.6, 1.19, 1.07, and 0.84 mm submerged in liquids with viscosities of 0.001, 0.1, 0.35, and 1 Pa.s. The data for bubble formation was obtained using a high-speed imaging technique. The results show that the bubble diameter at the departure increases as the needle diameter, liquid viscosity, and gas flow rate increase. In addition, the decrease in the submergence height results in a larger bubble at the departure. In order to analyze the changes in bubble detachment characteristics, a force modelling on a growing bubble was proposed. The experimental data were utilized for training a feed-forward back propagation neural network system to estimate the bubble detachment diameter. They were also used to propose a correlation to predict bubble diameter at the departure. The proposed correlation is found to be in the range of ± 8% of the obtained experimental data.
کلیدواژه ها:
نویسندگان
Erfan Kosari
Department of Mechanical Engineering, University of California, Riverside, CA ۹۲۵۲۱, USA
Javad Eshrgahi
Center of Excellence in Design and Optimization of Energy Systems, School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran
Wael H. Ahmed
School of Engineering, University of Guelph, Guelph, Ontario, Canada
Pedram Hanafizadeh
Center of Excellence in Design and Optimization of Energy Systems, School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :